D e c e m b e r 2 0 1 3 • V o l . 1 5 7 • N o . 1 2
Vol. 157 • No. 12 • Decem December ber 2013
Top Plants: Five Exemplary Renewable Plants BUYERS’ GUIDE 2014 Integrating Renewables in China Using SCR Catalysts for Mercury Co-benefits PV Modules Cast a Shadow over CSP
WHERE WHE RE WA WATER TER and POWER MEET C U S T O M I Z E D W AT A T E R S O L U T I O N S T H AT AT F I T Y O U R P O W E R P L A N T
Achieving Zero Liquid Discharge When a public utility client needed upgrades to the FGD effluent system at a coal plant, Tisha Scroggin and Don Schilling took a long, hard look at how it could be done. Applying recent experience, the pair helped the utility install a zero liquid discharge (ZLD) system in less than 20 months. With a final cost of approximately $45 million per 100 gpm treated, the ZLD system eliminated a discharge point and was completed on a schedule that defied industry norms. In the long run, the installation gave the utility cost and regulatory certainty by removing future needs for additional equipment.
As a nationwide technical leader in ZLD system development, development, Don has 40 years of experience consulting with utilities on the water requirements for coal and other power plants. Tisha has led the installation of ZLD systems for clients facing regulatory challenges to their power plant water systems. They are two of our experienced professionals who can help you identify the water alternative that fits:
Zero liquid discharge Customized wastewater treatment and water management Constructed wetlands Landfill and pond management management Bottom ash handling
9400 Ward Parkway Kansas City, MO 64114
www.burnsmcd.com/water-team
E n g i n e e r i n g , A r c h i t e c t u re , C o n s t r u c t i o n , E n v i r o n m e n t a l a n d C o n s u l t i n g S o l u t i o n s CIRCLE 1 ON READER SERVICE CARD
Established 1882 • Vol. 157 • No. 12
24 24
December 201 2013 3
26
Professional, Technical & IntegratedMaintenance Solutions for the Power Industry
34
On the cover Portugal has embraced renewable energy sources, principally wind and hydropower, because the country has no indigenous gas or oil resources. The national energy plan requires construction of 10 new hydropower plants by 2020, which includes the recently commissioned 259-MW Alqueva II, which doubled the pumped storage hydropower capacity of the facility. Courtesy: Alstom
COVER STORY: STORY: RENEWABLE TOP PLANTS 24 Alqueva II Pumped Pumped Storage Hydropower Hydropower Plant, Plant, Alqueva, Portugal Portugal It’s It’s often been said that the key to greater integration of variable renewable generation on any major grid is energy storage. This fast-response renewable plant both provides baseload power and stores backup power for the large amount of wind power located in the south of Portugal. Portugal.
Turbine Services
Valve Services
Instrumentation & Control
Specialty Welding
Radiation Protection
Engineering
Project Management
26 Macarthur Wind Farm, Victoria, Victoria, Australia Australia Developing the largest wind farm in the Southern Hemisphere was logistically complex, in part because it involved transporting transporting the largest wind turbines ever erected in Australia. The project also was the first to purchase the Vestas V112-3.0 MW wind turbines.
30 Mesquite Solar Solar 1, Maricopa County, Arizona Power from this 150-MW photovoltaic plant is helping California meet its ambitious renewable generation goals. It stands out not only for its size but also its use of leading-edge components designed for the extremes of its desert setting.
32 Polaniec Green Unit, Polaniec, Poland Across Europe, momentum is shifting from fossil fuels to renewables, and Poland is no exception. That’s That’s where you’ll find the world’s largest biomass-fired circulating fluidized bed boiler, with a combination of renewable fuel, efficient design, and emissions controls to deliver impressive results.
34 Shams 1, Madinat Madinat Zayed, Zayed, United Arab Emirates You might think a desert is an ideal location for solar power, but Masdar had to address several challenges before bringing online the world’s largest concentrating solar power plant (at the time it was commissioned). The lessons learned should help future projects in the Middle East and elsewhere.
SPECIAL REPORT REPORT:: RENEWABLES IN CHINA 36 A Plan for Optimizing Technologies Technologies to Support Variable Variable Renewable Generation in China Between 2011 2011 and 2015, China plans to install inst all 75 GW of wind w ind and solar capacity. capacit y. Safely and effectively integrating that enormous amount of variable generation into the grid will require careful analysis and strategic deployment of appropriate technologies.
2014
2014
BUYERS’ GUIDE
63
Nuclear Fossil Renewables
www.bhienergy.com 800.225.0385 CIRCLE 2 ON READER SERVICE CARD
|
December 2013 POWER
www.powermag.com
1
FEATURES
RENEWABLES
42 Photovoltaics Overshadow Concentrated Solar Power Power Both concentrating concen trating solar so lar power (CSP) and photovoltaic pho tovoltaic power powe r are near “grid parity,” yet CSP is far behind in total installed capacity. capacity. We We look at what it would take for CSP to maximize its technology advantages.
EMISSIONS
46 Optimized SCR Catalysts Maximize Maximize Mercury Removal Removal Co-Benefits Co-Benefits A newly commercialized technology can help your plant develop a catalyst management plan that delivers the required levels of mercury oxidation through existing equipment, which can result in substantial cost savings over installing new equipment.
50
WORKFORCE TRAINING
50 Power Plant Plant Training Training Simulators Simulators Explained Explained Faced with the dual challenges of less-experienced staff and leaner staffs, many plants are considering the use of simulators. Before you choose between a motorcycle and a stretch limo, learn what various types of simulators can offer.
8
OFFSHORE WIND
52 A Wind Energy Energy Plan That Fits Fits America’s America’s Resources To date, offshore wind generation in the U.S. is somewhere on the horizon. One technology developer makes the case that floating vertical axis wind turbines are best suited for the job.
NUCLEAR
56 When It Comes to Nuclear Nuclear Plants, Is Small Beautiful? Beautiful? Though small modular reactors have their detractors, on balance, they appear to have multiple advantages over the familiar large-scale plants—at least for U.S. developers. EVENTS
59 Coal in Favor Favor as Malaysia Malaysia Increases Its Installed Capacity Did you miss the Asian Sub-Bituminous Coal Users’ Group meeting? Here’s a rundown of the main themes.
18
DEPARTMENTS SPEAKING OF POWER
6 The When, Where, and Why of Energy Patents GLOBAL MONITOR
8 8 10 12 13 14 16 Connect with POWER If you like POWER magazine, magazine, follow us online (POWERmagazine) for timely industry news and comments.
Germany Raises Renewables Levy by 20% Headway for Congo’s Long-Delayed Long-Delay ed 40-GW Inga Hydro Project THE BIG BIG PICTURE: PICTURE: Capturing Carbon IEA: Wind Power Could Supply 18% of World’s Power by 2050 India Withdraws Tender for Chhattisgarh Chhattis garh UMPP Spain Inaugurates Inaugurates 2-GW 2-GW Pumped Pumped Storage Facility POWER Digest FOCUS ON O&M
18 Preventing Failure of Elastomeric Expansion Expansion Joints in FGD Systems LEGAL & REGULATORY
22 Federal-State Cooperation Cooperation Is Needed in Transmission Transmission Project Development Development By James K. Mitchell, Davis Wright Tremaine LLP
Become our fan on Facebook Follow us on Twitter
62 NEW PRODUCTS
COMMENTARY
128 Defining the Future: Time to Get Real Join the LinkedIn POWER magazine Group 2
By Christoph Frei, secretary general, World Energy Council
www.powermag.com
|
POWER December 2013
CIRCLE 3 ON READER SERVICE CARD
EDITORIAL & PRODUCTION
Editor: Dr. Gail Reitenbach
[email protected] Consulting Editor: Dr. Robert Peltier, PE Gas Technology Editor: Thomas Overton, JD Associate Editor: Sonal Patel Associate Editor: Aaron Larson Butcher, David Daniels, Daniels, PE; Contributing Editors: Brandon Bell, PE; Charles Butcher, Steven F. Greenwald; Jeffrey P. Gray; Jim Hylko; Kennedy Maize; Dick Storm, PE Senior Graphic Designer: Michele White Production Manager: Tony Campana,
[email protected] [email protected]
Visit POWER on the web: www.powermag.com Subscribe online at: www.submag.com/sub/pw POWER (ISSN 0032-5929) is published monthly by Access Intelligence, LLC, 4 Choke Cherry Road, Second Floor, Rockville, MD 20850. Periodicals Postage Paid Paid at Rockville, MD 20850-4024 and at additional mailing offices. POSTMASTER: Send POSTMASTER: Send addres s changes to POWER, P.O. Box 2182, Skokie, IL 60076. Email:
[email protected]. Canadian Post 40612608. 40612608. Return Undeliverable Canadian Addresses to: I MEX Global Solutions , P.O. BOX 25542, London, ON N6C 6B2.
ADVERTISING SALES Associate Publisher: Matthew Grant Southern & Eastern U.S./Eastern Canada/ 713-343-1882 , mattg@powermag .com Latin America: Matthew Grant, 713-343-1882 Central & Western U.S./Western Canada: Dan Gentile, 512-918-8075, 512-918-8075,
[email protected] [email protected] Northeast U.S. Ed Mueller, 309-278-8120,
[email protected] UK/Benelux/Scandinavia/Germany/ Switzerland/Austria/Eastern Europe: Petra Trautes, +49 69 5860 4760, ptrautes@access intel.c om Ferruccio Silvera, +39 (0) 2 284 6716,
[email protected] [email protected] Italy/France/Spain/Portugal: Ferruccio Japan: Katsuhiro Ishii, +81 3 5691 5691 3335,
[email protected] [email protected] India: Faredoon B. Kuka, Kuka, 91 22 5570 3081/82, 3081/82,
[email protected] South Korea: Peter Kwon, +82 2 416 2876, 2876, +82 2 2202 9351,
[email protected] t Thailand: Nartnittha Jirarayapong, Jirarayapong, +66 (0) 2 237-9471, 237-9471, +66 (0) 2 237 9478 4176, +60 3 706 4177, 4177, nmedia@tm .net.my Malaysia: Tony Tan, +60 3 706 4176, Classified Advertising Advertising Diane Burleson, 512-250-9555, 512-250-9555,
[email protected] [email protected] POWER Buyers’ Guide Sales Diane Burleson, 512-250-9555, 512-250-9555,
[email protected] [email protected]
AUDIENCE DEVELOPMENT Audience Development Director: Sarah Garwood Fulfillment Manager: George Severine
CUSTOMER SERVICE For subscriber service: Electronic and Paper Reprints: List Sales: All Other Customer Service: Service:
[email protected],
[email protected], 800-542-2823 or 847-763-9509 847-763-9509 Wright’s Wright’s Media,
[email protected], 877-652-5295 877-652-5295 Statlistics, Jen Felling, Felling,
[email protected],
[email protected], 203-778-8700 713-343-1887
BUSINESS OFFICE TradeFair Group Publicati ons, 11000 11000 Richmond Avenue, Suite 690, Houston, TX 77042 Vice President President and Publisher: Michael Grossman , 713-343-1887, 713-343-1887, mgrossma n@accessi ntel.com Vice President, Energy and Engineering Events: Daniel McKinnon Energy Events Content Director: David Wagman
Subscriptions: Available at no charge only for qualified executives and engineering and supervisory personnel in electric utilities, independent generating companies, consulting engineering firms, process industries, and other manufacturmanufacturing industries. All others in the U.S. and U.S. possessions: $87 for one year, $131 for two years. In Canada: US$92 for one year, US$148 for two years. Outside U.S. and Canada: US$197 for one year, US$318 for two years (includes air mail delivery). Payment in full or credit card information is required to process your order. Subscription request must include subscriber name, title, and company name. For new or renewal orders, call 847-763-9509. 847-763-9509. Single copy price: $25. The publisher reserves the right to accept or reject any order. Allow four to twelve weeks for shipment of the first issue on subscriptions. Missing issues must be claimed within three months for the U.S. or within six months outside U.S. For customer service and address changes, call 847-7639509 or fax 832-242-1971 or e-mail powermag@halldata .com or wr ite to POWER, P.O. P.O. Box 2182, Skokie, IL 60076. Please include account number, which appears above name on magazine mailing label or send entire label. Photocopy Permission: Permission: For licensing and reprints of POWER magazine content, please contact Wright’s Wright’s Media at 877652-5295 or
[email protected].
[email protected]. Executive Offices of TradeFair Group Publications: 11000 Richmond Avenue, Avenue, Suite 690, Houston, TX 77042. Copyright 2013 by TradeFair Group Publications. All rights reserved.
ACCESS INTELLIGENCE, LLC 4 Choke Cherry Road, 2nd Floor, Rockville, MD 20850 301-354-200 301-354-200 0 • www.accessintel.com
Chief Executive Officer: Exec. Vice President & Chief Financial Officer: Exec. Vice President, Human Resources & Administrati on: Divisi onal President, Business Information Group: Senior Vice President, Corporate Audience Development: Senior Vice President & Chief Information Officer: Vice President, Production, Digital Media & Design : Vice President, Financial Planning & Internal Audit: Vice President/Corporate Controller:
4
Donald A. Pazour Pazour Ed Pinedo Macy L. Fecto Fecto Heather Farley Sylvia Sierra Robert Paciorek Michael Kraus Steve Barber Gerald Stasko
www.powermag.com
|
POWER December 2013
Follow
the Money ™
Use true volumetrics to take stock of your inventory costs. Contact Magnetrol ® to learn more about CONTOUR acoustic volume mapping.
CIRCLE 4 ON READER SERVICE CARD
©2013 Magnetrol International, Incorporated
SPEAKING OF POWER
The When, Where, and Why of of Energy Energy Patent Patentss ew research conducted by Massachusetts Institute of Technology and Santa Fe Institute researchers finds that the number of energy patents is increasing faster than patents overall. However, the trend lines are strikingly different for different energy technologies. The results, published as “Determinants of the Pace of Global Innovation in Energy Technologies,” included several surprises. The researchers examined datasets including more than 73,000 energy-related patents issued in more than 100 countries between 1970 and 2009 and found that the number of energy patents rose dramatically over those four decades, especially for solar and wind. In contrast, patents involving fossil fuels increased only slightly during the period studied, while filings in nuclear technology were flat.
N
Money Plus Markets The researchers found investment in alternative energy technologies surged during the 1970s energy crises but was followed by decades of little R&D investment when oil prices fell. “The observed correlation between total (public and private) R&D and patenting in the US over the period of 1970–2003 suggested that this slowdown in innovation was the direct result of disinvestment in research,” they write. However, more recently, something changed. The researchers note that “The empirical evidence points to a pronounced increase in patenting in energy technologies over the last decade . . . despite traditional investment—private and public R&D—not rising commensurately.” commensurate ly.” Clearly, money isn’t the only driver of innovation. Markets also play a role. The team said the trends over time and across technologies can only “be accounted for by the combined effects of public investments in R&D and a fast rate of growth in markets for these technologies.” So it should come as no surprise that “Renewable energy technologies—especially solar and wind— are growing most rapidly while patenting in nuclear fission has remained low despite sustained high levels of public investment.” 6
So why not leave innovation up to markets alone? As the researchers found, early-stage markets for new technology are typically very small, so public R&D investments are needed to spur new approaches. As markets develop, market growth, sometimes driven by public policy, attracts investment. “Public R&D investments in innovation and those driven by market expansion have effects that are multiplicative, with each providing a base multiplier for the other. Any public R&D investment is highly leveraged by market driven investments as technologies develop towards stage B, as is presently occurring with several energy technologies such as solar and wind.”
Fossil Sector Falling Behind Carbon capture and sequestration (CCS) for power plants is one of those earlystage markets. Although CCS has been used commercially, its success to date (for enhanced oil recovery) is highly locationdependent. CCS for power plants is effectively a new market. As the researchers note, “It is important to emphasize that the growth of markets for low-carbon energy technologies, which improve on an aspect of performance (carbon emissions) not commonly captured by market price . . . has depended strongly on public policy. We also note that policies are likely needed to fund research and incentivize market growth further until these technologies become cost-competitive and can take off on their own.” Without innovation innovation for CCS, the outlook for fossil-fueled generation is bleak, and not just in the U.S. In late October, the U.S. Treasury Department declared the nation would no longer support multilateral development bank funding for new overseas coal projects—unless they employ CCS. Meanwhile, a report issued earlier in October by the Global CCS Institute found found that progress toward large-scale CCS has stalled, particularly for projects involving power generation (see p. 10). Even a major lobbying group, the World Coal Association, has called for the develwww.powermag.com
opment of CCS to enable the future use of coal. So why has CCS R&D been so slow? The Global CCS Institute blames weak policy support: “Without sufficient policy incentives to attract private funding, it is difficult to create the economic or market conditions required for broad-based CCS demonstration (and deployment).”
U.S. Is Not No. 1 Why should you care what patents are filed and where? Because, as the study authors note, “Patents provide an unparalleled measure of the location and intensity of innovative activity.” And when it comes to energy-related patents, the U.S. is not in the lead. Japan issued the most patents for all energy technologies other than coal, hydroelectric, hydroelectric, biofuels, and natural gas over the study period. China is now issuing the most coal patents, surpassing both the U.S. and Europe, and China is running a close second to Japan for total wind patents. However, those rankings don’t tell the whole story. The researchers researchers point poi nt out that they approached their quantitative analysis at a global level because “It is common for a technology to be, b e, for example, developed by a US firm, patented and manufactured in China, and sold and installed in Europe.” Nevertheless, patent location is an indication of where that intellectual property is likely to be used, and the biggest market for new generation of all sorts is clearly not in North America. Remember, the researchers looked at patent filings, not commercial technologies. But patents are often a leading indicator of market growth or revitalization. Without them, industries reinforce the status quo and can eventually die. At the very least, this study should show both industry and government leaders what it takes for any country hoping to capture market share for tomorrow’s energy technologies. As the researchers noted, a dollar invested today in R&D is likely to have ripple effects far into the future. — Gail Gail Reitenbach, PhD is is editor of POWER. Follow her on Twitter @GailReit and the editorial team @POWERmagazine. ■
|
POWER December 2013
Naturally, you have options.
Technically, we have solutions. Considering converting older coal-fired plants to natural gas firing? Babcock & Wilcox offers complete coal-to-gas conversions, regardless of the original equipment manufacturer. Engineered solutions include combustion system, pressure part and auxiliar y equipment improvements. Considering expanding natural gas generating capacity? For combined cycle applications, we offer heat recovery steam generators (HRSGs) with our innovative FastCirc™ vertical separator system. This system incorporates the same proven fast startup technology of highly cycled once-through designs into our easy-to-operate, easy -to-operate, flexible and cost-effective natural circulation HRSG design. And, our water tube package boilers are a reliable, low cost-of-operation solution for a wide variety of applications. We also have the construction installation installation and management expertise expertise to get your natural gas project done, on time and within budget. If natural gas is an option for you, contact us for the solution. Coal-to-Gas Conversions | HRSGs | Package Boilers | Construction
Babcock & Wilcox Power Generation Group, Inc. 1-800-BABCOCK (222-2625) www.babcock.com www.babcoc k.com © 2013 Babcock & Wilcox Power Generation Group, Inc. All rights reserved.
CIRCLE 5 ON READER SERVICE CARD
Germany Raises Renewables Levy by 20% Germany’s levy to promote renewables under the 2008 Renewable Energy Act (EEG) will climb to €0.624/kWh in 2014—a 20% increase that represents nearly a fifth of residential electricity bills. The measure announced by the country’s four transmission system operators (TSOs), who independently determine the EEG surcharge, is already under considerable political debate. As RWE’s Sebastian Ackermann explains it, because power produced by wind turbines and photovoltaics is “much more expensive” than power from conventional power stations, “operators of these facilities receive a subsidy for the energy they feed into the grid, which is significantly higher than market prices on the energy exchange.” Rules for these subsidies are outlined in the EEG Act, but that law also outlines how much of the additional cost incurred in generating renewable energy is passed on to consumers. The EEG levy is included in the electricity prices that power companies charge their customers. “These companies act as collection agencies and pass on the money to the grid
operators,” explains Ackermann. “The grid operators then use this money in its entirety to pay for the energy from the [renewable power] producers.” producers.” The latest increase in the EEG levy compares to €0.131/kWh in 2009 and €0.528/ kWh in 2013. Next year, it will amount to about €23.6 billion ($32 billion). Many argue that it has successfully spurred the increase of renewables in Germany (Figure 1), which is in the process of phasing out nuclear power and has ambitions to produce 80% of its power from renewables in 2050 compared to the current 23%. In 2011 alone, for example, the number of renewable facilities connected to the grid soared by 24%, while renewable energy increased 16%. In October, the country’s TSOs said forecasts showed another significant increase of renewable generation in the upcoming year, increasing from the current 135 TWh to 150 TWh. But the levy also means the average German household currently pays €180 ($242) per year to subsidize renewable energy. energy. Meanwhile, no upper limit on Germany’s subsidies for renewables has been set. Another sticking point is that the EEG
1. New coal. Germany’s increasing output of renewables, incentivized by a levy that will jump 20% next year, has prompted an electricit y glut that has caused wholesale power prices to plummet 60% since their 2008 peak. This This December, December, three coal plants are expected to come online, built by GDF Suez, Trianel, and Steag. RWE is building two new hard coal–fired units (shown here) with a total capacity of 1,600 MW at its existing Hamm power plant site in Westphalia. Courtesy: RWE
levy is nearly 25% higher for residential and business consumers than for industrial users, though as Ackermann points out, “The key reason for [these exceptions] is the fear that energy-intensive companies in Germany will move away, and take jobs with them.” However, Germany’s BDI industry federation, which represents about 100,000 companies, including Siemens AG, said in a statement in October that re-elected Chancellor Angela Merkel’s third-term government must “radically reform” the EEG to tamp down industry costs, which are straining energy-intensive sectors like steelmakers. A recent BDI study predicts electricity prices for big industrial customers in Germany may grow on the back of the EEG levy and increasing grid costs from €90/MWh in 2012 to around €98/ kWh to €110/kWh in 2020. That compares to a projected increase of just €48/MWh to €54/MWh over the same period in the U.S., when cheap shale gas is factored in. The government has said it will amend the EEG law once Merkel’s Christian Democratic bloc reaches an agreement with another party to form a new coalition following the September elections. Members of Germany’s Green Party, which championed the nuclear phaseout and have rallied for renewables, say adding new wind turbines and solar panels only account for 10% of the EEG levy’s increase. They instead point to a failing power market and industry aid that has been misappropriated by the government on non-privileged electricity customers.
Headway for Congo’s Con go’s Long-Delayed 40-GW Inga Hydro Project Plans to build the $12 billion Inga 3 hydropower project may be finally coming to fruition after a new energy treaty signed by South Africa and Democratic Republic of Congo (DRC) promised to give the long-stalled project a credible power purchaser. The DRC has been seeking a development group for the 4.8-GW project proposed on the Congo River—the third largest river in the world by volume of water discharged—and bidders have apparently been forthcoming. So far bid groups for the projects include China Three Gorges Corp. and Sinohydro Corp; a consortium of South Korean companies POSCO and Daewoo Corp. and Canada’s SNC-Lavalin Group; 8
www.powermag.com
|
POWER December 2013
The Democratic Republic of Congo is pushing on with a proj2. Getting the ball rolling. The ect to build the 4.8-GW Inga 3 hydropower project on the Congo River. This image shows a 2004 view of the 351-MW Inga 1 dam, with the feeding canal for 1,424-MW Inga 2 in the foreground. Source: Alaindg/Commons Alaindg/Commons
and Spain’s Actividades de Construccion y Servicios SA and Eurofinsa Group. But the DRC is still open to other investors and has said it could make its decision in June or July next year. That means construction of Inga 3, which would be the first of eight massive units comprising the ambitious 40-GW Grand Inga project, may begin in October 2015 and be completed by 2020. That $80 billion project would require 66 square miles around the Congo River to be flooded to create what could become the largest source of hydropower in the world. Two existing dams—Inga 1 and Inga 2 (Figure 2)—have already been operating on the Congo River for more than three decades, but they are dilapidated and underperform at around 50% of capacity. Internationally Internationally backed efforts to refurbish those plants are underway, but even these more modest projects have been plagued by years of delay. By June 2013, three out of six turbines in Inga I had been rehabilitated and one had been replaced. The other two turbines were scheduled for completion by the end of 2013. Five of Inga 2’s eight turbines were working, and the other three are scheduled to be refurbished by the end of 2015. While feasibility studies for the Inga 3 project have been carried out (financed by the African Development Bank), no power purchasers emerged until the DRC’s October treaty with South Africa, which guarantees 2,500 MW from the project |
December 2013 POWER
for South Africa’s power-strapped stateowned utility Eskom. Under the treaty, the DRC will build nearly 1,841 kilometers (km) of transmission lines to its border
with Zambia, and South Africa will install 1,540 km of lines from Zambia through Zimbabwe. The DRC has meanwhile said it will provide 1,300 MW from Inga 3 to the country’s lucrative but energy-short copper mining industries in Katanga province. The remainder is expected to power the DRC. Of the country’s population of 70 million, only 9% have electricity. Observers still express reservations about the project’s completion, however, owing to the DRC’s political volatility. volatility. The country is emerging from a long period of conflict and mismanagement, though in 2011—for the first time in more than four decades—it was able to organize back-toback multiparty presidential and parliamentary elections. Then there are cost concerns: Estimates to refurbish the Inga 1 and Inga 2 projects alone were recently expanded from $226.7 million to $460.2 million. Meanwhile, the World Bank is reviewing an aid request from the DRC’s Ministry of Energy for $73 million of the Inga 3’s $12 billion total project cost. It optimistically says in affiliated documents that the hydropower potential of the 40-GW Inga project would make it the largest and “most cost-effective” hydroelectric
CORMETECH CLEANER AIR THROUGH INNOVATION
SCR Catalyst Management Services Regularly scheduled Catalyst Performance Evaluations and Monitoring of SCR System Operations are key indicators to the overall health of the SCR. Contact us to discuss Cormetech’s full range of SCR catalyst management services and ensure low ownership cost associated with the SCR system.
ered. ive y. Deliv ity Reliabilit CORMETECH, Inc. 5000 International Dr. Durham, North Carolina 27712 USA
919-620-3000 www.cormetech.com
[email protected]
CIRCLE 6 ON READER SERVICE CARD
www.powermag.com
9
THE BIG PICTURE: Capturing Carbon Of 64 large-scale integrated projects to capture and store more than 25 million tonnes per year of carbon dioxide (CO2) that are already active or planned worldwide, only 29 are dedicated to the power sector. Carbon capture and storage (CCS) projects are operational in the gas processing and high-purity industries, but not in the power generation sector. The pace of CCS development remains well below the level for CCS to make a substantial contribution to climate change mitigation, says the Global CCS Institute. Its cause: not technical uncertainties but insufficient policy support “exacerbated by poor public understanding of the technology.” Notes: “Molecules” are scaled to reflect size of CO2 capture capacity; PC = post-combustion capture; IGCC = integrated gasification combined cycle. Source: Global CCS Institute —Copy and artwork by Sonal Patel, associate editor
Hydrogen Power (UAE): Economicss
Eemshaven (Netherlands): Policy Pegasus Rotterdam (Netherlands): Policy
Projects Canceled or on Hold Since January 2012, the number of active CCS projects worldwide dropped from 75 to 64 as projects, mostly for power generation, were scrapped or suspended.
Swan Hills Synfuels (Canada): Economics Mongstad (Norway): Economics, policy
Maritsa (Bulgaria): Economics
Bełchatów (Poland): Economics
Datang Daqing CCS (China, 2018), Oxyfuel Shanxi International Energy (China, 2018), Oxyfuel Korea-CCS 2 (S. Korea, 2019), N/A
Dongguan Taiyangzhou Taiyangzhou (China, 2019), IGCC
Lianyungang (China, 2019), IGCC
3. Define Stage
NRG Energy Parish Sinopec Shengli Oil Field (U.S., 2016), PC (China, 2015), PC Texas Clean Energy Rotterdam Opslag en Afvang (U.S., 2017), IGCC (Netherlands, 2017), PC Don Valley (UK, 2018), IGCC
2. Evaluate Stage
Getica CCS (Romania, 2016), PC
1. Identify Stage
Industrikraft Möre AS (Norway, 2018),PC
PurGen One (U.S.): Economics
Taylorville Taylorville Energy Center (U.S.): Economics
Tenaska Trailblazer Energy Center (U.S.): Economics
Cash Creek (U.S.): Economics
C.GEN North Killingholme Huaneng GreenGen (UK, 2015) IGCC (China, 2016), IGCC White Rose CCS (UK, 2016), Oxyfuel Peterhead Gas Korea-CCS 1 (UK, 2017), PC (S. Korea, 2017), PC Captain Clean Energy (UK, 2018), IGCC Emirates Aluminium (UAE, 2018), PC Quintana South Heart (U.S., 2017), IGCC
Surat Basin (Australia, (Australia, 2022), PC
OXYCFB 300 Compostilla (Spain, 2018), Oxyfuel
Teesside Low Carbon (UK, 2018), IGCC
Bow City Power (Canada, 2019), PC
4. Construct Stage Boundary Dam, (Saskatchewan, Canada, 2014), PC
Hydrogen Energy California (U.S., 2018), IGCC Porto Tolle FutureGen 2.0, (Spain, 2020), PC (U.S., 2017) Oxyfuel
10
www.powermag.com
Kemper County (Miss., U.S., 2014), IGCC
|
POWER December 2013
There’s no better way to reach the peak than with us
History shows the very cold winter days in New England amount to only a fraction of the entire year. Our LNG facilities outside of Boston can serve natural gas utilities and power producers on a weekly, daily, even hourly basis to meet that peak demand more efficiently and cost effectively than any other option for the region. Let’s save time and money for New Englanders. We’re here and ready to serve.
CIRCLE 7 ON READER SERVICE CARD
www.distrigas.com
site in the world. And though it notes that “heavy engagement” in the electricity sector through two regional energy projects yielded “limited results,” significant progress has been made in recent months on the institutional front, including strengthening governance within the DRC’s National Electricity Co.
IEA: Wind Power Could Supply 18% of World’s World’ s Power by 2050 Up to 18% of the world’s electricity could be generated with wind energy by 2050, but the massive jump from 2.6% today would require the nearly 300 GW of current wind capacity worldwide to increase eight- to tenfold and cost nearly $150 billion a year, year, the International International Energy Agency (IEA) said in i n an updated assessment of the world’s wind power. The Paris-based autonomous energy agency now sees a much larger penetration of wind power than the 12% by 2050 share forecast in its previous 2009 edition of the “Technology Roadmap: Wind Energy.” Energy.” Forecasts put China as the world’s future wind power leader, overtaking European members of the Organisation for Economic Co-operation and Development by about 2020 or 2025, with the U.S. ranked third. But IEA Executive Director Maria van der Hoeven cautioned that much more remains to be done before that increased share of wind is achieved, so that a global energy-related carbon dioxide target of 50% below current levels can be reached by 2050. “There is a continuing need for improved technology,” she said. “Increasing levels of low-cost wind still require predictable, supportive regulatory environments, and appropriate market designs. The challenges of integrating higher levels of
FSE Energy ensures the success of our woldwide customer base through the delivery of the highest quality heat and energy equipment solutions. Product details at www.fseenergy.com. CIRCLE 8 ON READER SERVICE CARD 12
3. Growing giants.
According to the International Energy Agency, the size of wind turbines has continued to increase. The average rated capacity of new grid-connected onshore turbines in 2012 was 1.8 MW, compared to 1.6 MW in 2008, though the largest commercial wind turbine avail able today is i s 7.5 MW, with a rotor diameter diam eter of 127 meters. Offshore turbine sizes have grown from 3 MW to 4 MW in 2012. However, turbines with a rated capacity ranging from 1.5 MW to 2.5 MW still make up the largest market segment. Source: EWEA 126 m 7,500 kW
200 180
100 m 3,000 kW
160 140
) m120 ( t h g i 100 e h b 80 u H 60 40
Rotor Diameter (m) Rating (kW)
70 m 1,500 kW
80 m 1,800 kW
50 m 750 kW 30 m 300 kW
17 m 75 kW
20 0
1980 – 1990 – 1990 1995
1995 – 2000
2000 – 2005
2005 – 2010
2010
2011
variable wind power into the grid must be tackled. And for offshore wind—still at the early stages of the deployment journey—much remains to be done to develop appropriate largescale systems and to reduce costs.” Since 2008, the report notes, wind power deployment has more than doubled on the back of technological developments that have boosted energy yields and reduced operation and maintenance costs. Today, wind power provides 30% of Denmark’s total generation, 20% of Portugal’s, and 18% of Spain’s. The report finds that wind power has only received 2% of the world’s public energy research and development funding. Yet, costs have fallen: Land-based wind power generation costs range from $60/MWh to $130/MWh at most sites, and it can be competitive “where wind resources and financing conditions are favorable,” the IEA says, but “it still requires support in most countries.” Trends in the world’s wind sector noted by the agency include the large-scale deployment of offshore wind farms (though the IEA points out this is limited mostly to Europe), an increasing number of turbines being installed in cold climates, and a rise in repowering old wind turbines with more modern and productive equipment. Repowering in particular is slated to grow tremendously over the next five years, increasing power generation at repowered sites from 1.5 TWh to 8.2 TWh by 2020. Wind market shares have also seen dramatic changes over the last five years, though most wind turbine manufacturers are concentrated in six countries: the U.S., Denmark, Germany, many, Spain, India, and China. China’s six largest wind companies alone have exceeded the majority 20% market share in recent years. Technologically, a general trend in turbine design has been to increase the height of the tower and the length of the blades. “This decrease in the specific power, or ratio of capacity over swept area, has pushed up capacity factors considerably for the same wind speeds,” says the IEA. The average rated capacity of land-based wind turbines has also increased from 1.6 MW in 2008 to 1.8 MW in 2012, while for offshore turbines, it has grown to 4 MW in 2012, versus 3 MW in 2008 (Figure 3). Otherwise, the sector is also seeing more development of rotors designed for lower wind speeds. Focus is also being placed on grid compatibility, acoustic emissions, visual appearance, and suitability for site conditions.
www.powermag.com
|
POWER December 2013
India Withdraws Tender for Chhattisgarh UMPP The Power Finance Corp. (PFC), India’s nodal agency that conducts bidding for 16 proposed Ultra-Mega Power Plants (UMPPs)—coal projects of a 4,000-MW scale to make power available at a minimum cost—in October withdrew a key tender inviting preliminary bids for the Surguja project in the country’s central state of Chhattisgarh. Though no official information about the withdrawal was made, Indian media reported the process for invitation of initial bids has suffered repeated delays because coal blocks for the project are located in dense forest area, which the Ministry of Environment and Forest have warned may cause environmental damage if mined. The PFC in October, however, issued requests for qualification for Odisha and Tamil Nadu UMPPs, projects that could be awarded in February 2014. India in 2005 proposed 16 UMPPs in various states, including Andhra Pradesh, Chhattisgarh, Gujarat, Jharkhand, Karnataka, Madhya Pradesh, Maharashtra, Odisha, and Tamil Nadu. Only four projects have so far been awarded. The first of those projects, Tata Power’s Mundra UMPP (a POWER 2013 2013 Top Plant) fully went live in March 2013, but its developer has been hemorrhaging financially after new rules rendered coal contracts between Tata Power and Indonesian producers invalid.
The change forced the company to procure imported coal at an unprecedented cost that increased 150% to 200% from the start of the bid process. Power sector investors have since expressed emphatic concerns about fuel risks in coal-short India. To keep investors interested in the build, own, and operate projects that the government says are integral to reducing the nation’s power demand-supply chasm (Figure 4), India’s power ministry in October
announced it had relaxed bidding norms by halving capital cost requirements to qualify for setting up UMPPs from 10% of the overall project cost to 5%. It also said it would consider costs incurred by companies on projects that span seven years, rather than five years, as previous bids required. Coal supply was assured for the Odisha UMPP, the government said, and land and water clearances had already been secured for both the Odisha and Tamil Nadu projects.
Generating Solutions for
Y E A R S 1983-2013
4. Super thermal. India plans to tackle chronic power shortages by boosting coalfired gener ation by 17,000 MW over th e next year. That will involve plants like NTPC’s 3-GW Rihand Super Thermal Power Project in Uttar Pradesh, whose sixth 500-MW unit was commissioned in October. The plant will power northern and western states, including Delhi, Punjab, and Haryana. Courtesy: NTPC
Through the support and collaboration of our customers and industry partners, Structural Integrity continues to be an industry leader in development and application of fully integrated nondestructive examination solutions. Combining our engineering, materials and NDE expertise with the industries most advanced inspection technologies has resulted in an extensive list of custom solutions for some of the industry’s most challenging outage issues. Call us today and we’ll generate a solution for you.
Delivering Solutions for the Power Generation Industry 877 -47 4-7 693
(877-4SI-POWER) www.structint.com/power Scan the QR Code for more information
CIRCLE 9 ON READER SERVICE CARD
|
December 2013 POWER
www.powermag.com
13
Spain Inaugurates 2-GW Pumped Storage Facility Europe’s largest pumped-storage power plant was inaugurated this October in the Júcar River basin in Spain’s eastern province of Valencia as Spanish utility Iberdrola commissioned the final seven-year-long, 1.7-GW phase of the La Muela project. The La Muela pumped storage project has since 1989 stored energy by pumping water from the Júcar River to an artificial upper reservoir at a height of 500 meters (Figure 5). The €1.2 billion ($1.6 billion) Cortes-La Muela expansion begun in 2006 doubled the capacity of the existing facility, though as Jose Navarro Torrijos, a senior industrial engineer at I berdrola noted, the ambitious project was not without difficulties in design and construction. The project entailed installation of four Alstomsupplied generator motors of 240 MVA/600 rpm, and a 840-m long penstock at a 45-degree angle to improve performance— all which proved to be an experience akin to “completing a Master’s in hands-on knowledge of hydraulic technologies,” Torrijos said. Capable of generating about 5,000 GWh per year, the project will prove essential for Spain, whose renewable power production share jumped from 13% in 2007 to 27% in 2012. The country has faced several challenges integrating the large amount of renewables into real-time dispatch of its power generation to meet power demand, and plans foresee the share of renewables to reach 38% in the future. A recent government report of renewable energy plans calls for the installation to increase from the current 5,350 MW of pumped-storage capacity to 6,300 MW by 2015 and 8,800 MW by 2020. A number
Total Mercury Control Solution 50% Less Sorbent Use Reducing Annual O&M Costs Power & Industrial & Midwest Energy Emissions have teamed to offer Custom Designed Equipment Feed Systems (ACI/DSI) and long-term Mercury Capture Supply Program contracts supported with MATS guarantees.
5. Pumping up capacity. Spanish utility Iberdrola this October commissioned the final phase of a project that doubles the capacity of the La Muela pumped storage facility in Spain’s eastern province of Valencia. The 2-GW facility uses the Júcar River basin as a lower reservoir and features a 840-meter-long 840-meter-long penstock that was inst alled at a 45-degree angle to improve performance. Courtesy: Iberdrola
Looking for Timely Industry News? Our weekly POWERnews eletter sends a short selection of the week’s top stories to your inbox every Thursday. You’ll also find the news stories as they are posted throughout the week on our homepage, www.powermag.com. While you’re there, sign up to get POWERnews. Here are just a few stories that ran in early November:
•
•
•
Complete EPC Contracts and Equipment Supply
•
•
DOE to Fund 18 Research Projects to Drive Down Cost of Carbon Capture V.C. Summer Unit 3 Nuclear Island Basemat Completed With Coal on the Way Out, Ontario Turns to Renewables Whitfield Goes on Offensive Versus EPA Senate Bills Kick Up New Efforts to Establish Federal Renewable Mandate
CIRCLE 10 ON READER SERVICE CARD 14
www.powermag.com
|
POWER December 2013
Vietnam Nixes Major Hydro Projects on Environmental Concerns.
What Blogger Ken Maize Did on His Fall Vacation Vacat ion A three-week cruise down the west coast of South America provided rich material for one of Kennedy Maize’s most interesting posts. Here’s a taste: “Wind power has always struck me as one of those ‘horses-forcourses’ technologies, well-suited for some situations and not so much for others. It doesn’t really fit well for much of the U.S., in my judgment. But wind makes a lot of sense for Chile, for reasons related to geography, geology, and meteorology.” Read about Chile’s generation options (plus a few colorful travelogue details) in “Chile’s High-Flying Wind Plan” in the POWERBlog: powermag.com/blog/chiles-high-flyingwind-plan/
of projects are already in the pipeline, including Endesa’s Moralets II project, a 400-MW expansion of the existing Moralets pumped storage project on the Noguera Ribagorzana River in northeastern Spain that is expected to come online in 2014. Iberdrola is spearheading another 728-MW project in northwestern Spain using the existing San Estaban reservior as the lower reservoir. Some observers point out, however, that the outlook for Spain’s renewables remains murky after a 2010 policy turnaround that sought to freeze unsustainable annual growth of the feed-in-tariff deficits, which had built up to a staggering $35 billion. In September, Spain’s government admitted that despite power price increases and ongoing reforms, tariff deficits this year alone had soared to about $4 billion.
POWER Digest First Kundankulam Unit Synchronized to Grid. The state-owned Nuclear Power Corporation of India Limited (NPCIL) on Oct. 22 synchronized to the grid the first of two units at the Kundankulam Nuclear Power Project. Startup of the project in the southern state of Tamil Nadu—twin VVER reactors built by Russia’s Atomstroyexport—has been delayed by anti-nuclear protests since it attained criticality in July. The Kundankulam project is the first pressurized water reactor belonging to the light water reactor category in India, which has cultivated an indigenous 16
nuclear power sector for decades. At 1,000 MW, it is also the largest “single” power generation project in the country.
Belarus Licenses Construction of New React or. or. The Belarus Department of Nuclear and Radiation Safety on Sept. 13 issued a license for the construction of the first of two Russianbuilt reactors at the Ostrovets site in the Grodno region. The Eastern European country in October 2011 awarded a main construction contract to Russia’s Atomstroyexport, and later finalized a $10 billion turnkey contract to Russian state nuclear enterprise Rosatom for the supply of the two 1,200-MWe AES-2006 reactors. The newly issued license means that full construction of the project can begin. Completion of the first reactor is expected in 2018, with commissioning set for the second unit in 2020.
Three CSP Units Opened. Abengoa SA in October opened its 280-MW Solana parabolic trough plant near Gila Bend, Ariz., as well as Solaben 1 and Solaben 6, two 50-MW parabolic trough plants in Extremadura, Spain. The Solana project is the first in the U.S. to feature a thermal energy storage sys tem that can produce 6 hours of power even if the sun is unavailable. Total investment of the plant is about $2 billion, of which $1.45 billion was received as a federal loan guarantee. The Solaben units are part of a larger 200-MW Extremadura Solar Complex, one of the largest in Europe. www.powermag.com
Vietnam’s government on Oct. 26 revealed that it had approved the removal of six potential large and 418 small hydropower projects from the country’s hydropower development master plan because they were likely to cause negative environmental and social impacts. It also suspended work on another 136 projects. The decision means that the Southeast Asian country that is struggling to meet surging power demand, and which last year produced 44% of the nation’s power with hydro, now has 815 hydropower projects in its national plan, including 268 that are already operational and 205 that are under construction. Among major projects rejected are the 135-MW Dong Nai 6 and the 106 MW Dong Nai 6A hydropower projects, which were to be built on the Dong Nai River where three other projects, the 180-MW Dong Nai 3, the 340-MW Dong Nai 4, and the 154-MW Dong Nai 5, are under development.
GDF Suez Shutters 1.9-GW Gas Plant for Demand Reasons. GDF Suez on Oct. 18 said it would decommission and demolish the 1.9-GW Teesside Power Station in the UK after reviewing the nation’s future power market and determining that the 1993-opened combined cycle gas turbine plant was unable to compete with newer, more efficient technology. The French utility group mothballed the power plant earlier this year after running it at a fraction of its capacity since 2009. GDF Suez had already closed or mothballed 12 GW of gas-fired capacity across Europe. An estimated 51 GW of gas-fired power has been shuttered across Europe due to competition from renewables and cheap coal imports.
Coal Plant 1-GW Expansion Planned in Indonesia. The Japan Japa n Bank for International Cooperation and the Export-Import Bank of Korea have agreed to extend loans to finance a 1-GW coal-fired power plant expansion at an existing 660-MW plant in Cirebon, in Indonesia’s West Java province. The plant is owned by Cirebon Electric Power , which comprises several companies, including Marubeni Corp ., Korea Midland Power , Samtan , and Indika Energy . The expansion is estimated to cost $1.5 billion to $2 billion. ■
— Sonal is a POWER associate edi- Sonal Patel is tor (@sonalcpatel, ( @sonalcpatel, @POWERmagazine). |
POWER December 2013
Follow the maze to the end.
Start Here
TE AM Se Serv rvic ices es
When it comes to a facility’s maintenance schedule there is no end. Planned maintenance is integral in any asset management program to ensure safe operations and to maximize uptime. Team provides a number of services to and resources to provide maintenance services throughout the world – according to your schedule. TEAM experts are available 24 hours a day, 7 days a week, 365 days a year. Call TEAM today: 1-800-662-8326
Bolting/Torquing Concrete Repair Emissions Control Exchanger Services Field Machining Fitness for Service
Manufacturing/ Engineering Mechanical Integrity NDE/NDT Inspection Specialty Welding
Heat Treating
Turnkey Tank Program
Hot Tap/Line Stop
Valve Insertion
Isolation Test Plugs
Valve Repair
Leak Repair
www.teamindustrialservices.com CIRCLE 12 ON READER SERVICE CARD
Preventing Failure of Elastomeric Expansion Joints in FGD Systems
Types of Expansion Joints rings. As with the tube, the body materials There are two primary types of expansion must be able to withstand the temperature joints—metal joints—metal and non-metallic non-metallic or elas- and internal pressure of the system during Fossil-fuel-based power generation generation plants tomeric. Metal expansion joints are con- operation. The cover is similar to the tube, with wet scrubbing systems use slurries structed in a bellows configuration from but it protects the body from the external of sorbents to remove sulfur dioxide from thin-gauge material designed to absorb rather than internal environment. As such, their emissions. These highly abrasive mechanical and thermal movement. Elas- it must be compatible with the surroundslurries accelerate wear on the expansion tomeric expansion joints, by contrast, are ing environment, including chemicals and joints in plants’ piping systems, resulting fabricated from natural or synthetic rubber temperature, temperature, as well as its location in the in failures and unplanned outages. These and fabric. Consisting of an inner elasto- system and the presence of nearby compofailures and outages can be prevented and meric tube fused to a metal-reinforced metal-reinforced fab- nents that can leak onto it. the service life of the joints maximized by ric body and an elastomeric cover, these taking into account key factors, such as types of expansion joints accommodate Flow Liners tube selection, arch design, and the use greater pipe movement and provide more Flow liners are used in expansion joints to of flow liners and controllers. abrasion resistance than metal joints. combat the effects of abrasion. Abrasive Sulfur dioxide is removed from power A typical flue gas desulfurization flows are frequently accompanied by subplants’ flue gas using wet or dry desulfu- (FGD) system using a limestone reagent stantial flow rates that can wreak havoc rization systems. Wet systems, which use operates in two stages—one for the re- on piping systems, including expansion alkaline chemical reagents including lime- moval of fly ash and the other for the re- joints. Here Here they can wear away the elasstone, lime, ammonia, and sodium, pose moval of sulfur dioxide. Flue gas passes tomeric tube material, exposing the body the greatest potential for abrasive wear in through the fly ash removal phase and to the potentially harmful media. Flow linnon-metallic joints. These reagents con- then enters the sulfur dioxide removal ers protect the surface of the tube by divert sulfur dioxide into a liquid or solid stage. Wet systems use expansion joints recting the fluid media away from it, while waste by-product, from which gypsum can in a number of locations, notably ab- allowing the joint to move freely within be extracted through oxidation. sorber bleed and slurry recycle pumps, its capabilities. Expansion joints (Figure 1) are flex- where they compensate for movement It is important to understand the reible connectors used to reduce vibra- and dampen vibration. lationship between the direction of flow tion, dampen sound, and accommodate The majority of expansion joints in FGD and the orientation of the flow liner, as it movement in industrial piping systems systems are elastomeric because of the can potentially harm the piping system. for pressurized fluids. These systems are abrasive nature of the application. The In most FGD systems, the recycle pump subject to movement from pressure or three basic components in this type of discharges vertically for recycling the vacuum, temperature gradients, equip- joint are the tube, body, body, and cover (Fig- material further up the tower wall. This ment vibration, their own weight, and ure 2). Consisting primarily of an elas- gravity-opposing gravity-opposing flow can recirculate and structural settlement. To compensate for tomeric material, the tube protects the build up behind the liner, rendering the this movement, expansion joints are typi- internal structure of the joint from the joint ineffective. ineffective. cally installed at the suction or discharge media passing through it. Selection of the As noted, the primary criteria used side of pumps, and at directional changes tube material should be based on chemical when selecting the proper type of exand long runs of piping. compatibility, temperature, and abrasive- pansion joint for a specific application ness of the application. include size, operating temperature, Serving as the “backbone” of an elas- pressure, and media. However, consider1. Expansive benefits. Expansion tomeric joint, the body consists of combi- ation also should be given to flow rate, joints reduce vibration, dampen sound, and nations of fabric and reinforcing metallic location in the system, and the use of accommodate movement in piping systems. control units. Significant flow rates acCourtesy: Garlock Sealing Technologies celerate abrasive wear; using filled-arch 2. Main parts. This cutaway shows the joints reduce turbulence, improve flow tube (yellow), cover (gray), and body (black) with minimal disruptions, and reduce the of an elastomeric expansion joint. Courtesy: potential for particle buildup. Garlock Sealing Sea ling Technologies Technologies Expansion joints also can be found on the suction side of recycle pumps (Figure 3), where they are used in two configurations. The first is a straight joint attached to a reducing spool attached to a pump, where a flow liner can be used in conjunction with a filled arch to protect it from abrasive media. The second is a tapered joint to replace the reducing reducing spool. This configuration prohibits the use of a flow liner and requires tube material that can 18
www.powermag.com
|
POWER December 2013
25
8 8 9 1 n i d e d n u o F
YEARS EXPERIENCE “The Best Of The Best®” READY TO MANAGE
YOUR NEXT POWER PROJECT PROJE CT..
Founded in 1988, PIC has been a leader in the power generation industry for over 20 years. We are experts at managing multi-faceted projects including start-up and commissioning, operations and maintenance, installation, turbine outages, mechanical services and technical services. Combine these capabilities with our responsive approach and global resources, and it’s easy to see why those who know choose PIC.
www.picworld.com
CIRCLE 13 ON READER SERVICE CARD
3. In use. Expansion joints are used on both the discharge and suction sides of recycle pumps. Courtesy: Garlock Sealing Tech- nologies
withstand significant wear. It should be noted that custom drill patterns and lateral offset from pipe misalignment can also contribute to premature failure of suction-side expansion joints. Unlike recycle pumps, absorber bleed pumps generally have smaller I.D.s but higher flow velocities and greater levels of abrasive abrasive particulates. particulates. Again, vertically vertically oriented flows can eliminate the protection afforded by flow liners.
Troubleshooting Proper pipe support is critical to the performance of absorber bleed pumps, as movements during operation can magnify the effects of abrasion-induced fatigue on the expansion joints. Therefore, measurements should be made prior to initial installation of an expansion joint and periodically during operation to detect any potential offsets (Figure 4). Unlike metal expansion joints, elastomeric joints exhibit visible signs of wear and fatigue that can alert observant users to potential failures. The indications include exterior cracking, blistering, deformation and delamination, exposure of metal or fabric reinforcement, ply separation of the cover, rubber deterioration, and leakage. Signs of impending failure can be seen in cracking at the base and softening of the joint, arch inversion, splitting of the outer diameter of the flange, and leakage at the flanges. The failure modes can be attributed to a variety of root causes, such as overextension ove rextension of the joint, chemical attack, excessive pressure or vacuum, elevated temperatures, and insufficient bolt load on the joint. Proper selection of expansion joints and appropriate
4. Measure twice, install once. Measurements before and after installation can detect potentially troublesome offsets. Courtesy: Garlock Sealing Technologies
preventative maintenance programs that include proactive troubleshooting and failure analysis can result in significant savings by reducing unplanned breakdowns and maximizing the life of non-metallic expansion joints joints in FGD applica applicatio tions ns.. — Sherwin (sherwin.damdar@ Sherwin Damdar (sherwin.damdar@ garlock.com) is associate product manager and Stephen Cramb (stephen.cramb@ garlock.com) is applications and product engineer for expansion joints, Garlock Sealing Technologies. ■
TAVAZZANO - HRSG for Power Plant - Italy Porto CORsini - hrsg for Power Plant - Italy
FESSENHEIM - Feedwater Heater for CNPE - France SIDI KRIR - Steam Surface Condenser - Egypt
STF S.p.A. Via Robecco, 20 20013 Magenta (MI) Italia Tel: +39 02 972091 Fax: +39 02 9794977 www.stf.it e-mail:
[email protected]
BWE
Burmeister & Wain Energy A/S Lundtoftegårdsvej 93A DK-2800 Kgs. Lyngby - Denmark Tel: +45 39 45 20 00 Fax: +45 39 45 20 05 www.bwe.dk e-mail:
[email protected]
Heat Recovery Steam Generators Industrial Boilers Heat Transfer Products for Nuclear Plants Feedwater Heaters Steam Surface Condensers Power Plant Service
BWE Energy India Pvt. Ltd No. 43, KB Dasan Road Teynampet Chennai - 600 018 TamilNadu, India Tel: +91 44 24 32 8101/2 Fax: +91 44 24 32 8103 e-mail:
[email protected]
Utility Boilers USC Boilers Biomass Fired Boilers Low-NOx Burners Regenerative Air Preheaters and Gas-Gas Heaters Power Plant Service: solutions
CIRCLE 14 ON READER SERVICE CARD 20
www.powermag.com
|
POWER December 2013
The Industrial Choice
When it comes to industrial industrial electric motors, power transmission products and drives, no other manufacturer offers more than Baldor...that is why Baldor is The Industrial Choice! Whether your application application requires a fractional or 15,000 Hp motor, a variable frequency drive, mounted bearings or gearing, a pulley or sheave, Baldor is the choice most preferred by industry. When your next project project demands the most reliable reliable and energy efficient products available, look to Baldor as your one source for more industrial solutions. baldor.com
479-646-4711
©2013 Baldor Electric Company CIRCLE 15 ON READER SERVICE CARD
Superior Reliability
Unmatched Quality
Local Sales and Support
Quickest Delivery Available
Federal-State Cooperation Is Needed in Transmission Project Development James K. Mitchell
eginning with its landmark Order No. 888 in 1996, the Federal Energy Regulatory Commission (FERC) has aggressively pursued policies designed to foster planning and construction of new transmission facilities, in order to support expansion of competitive wholesale electricity markets. However, as FERC has acknowledged, “there is longstanding state authority over certain matters that are relevant to transmission planning and expansion, such as matters relevant to siting, permitting and construction.” FERC can best achieve its goal of enhancing competition through construction of new facilities if plans for construction of such facilities are developed with due regard for applicable state requirements. requirements.
B
Transmission Planning and FERC Order No. 1000 Each transmission provider is required to include in its Open Access Transmission Tariff (OATT) provisions for engaging in a coordinated, open, and transparent transmission planning process with affected stakeholders. FERC Order No. 1000, which was issued in July 2011, also obligates each transmission provider to participate with its neighbors neighbors in coordinated regional regional transmission planning. This process is intended to evaluate “transmission solutions that might meet the needs of the transmission planning pl anning region more efficiently or cost-effectively than solutions identified by individual public utility transmission providers in their local transmission planning process.” FERC policy assumes that the regional transmission planning process will be enhanced if new, non-utility affiliated transmission developers are encouraged to submit proposals for meeting regional transmission needs. There is little incentive for such developers to incur the costs of participation unless they can reasonably expect that they will be designated to construct the facilities should their proposal be adopted. Order No. 1000 therefore required each transmission provider to remove from its OATT any provision giving the incumbent transmission provider a rightof-first-refusal to construct transmission facilities in a regional transmission transmission plan, subject to certain limitations. limitations. FERC has recently interpreted this provision to require deletion of references in OATTs to the need for compliance with state laws. For example, FERC ordered PJM Interconnection to remove language giving the incumbent transmission owner a preference to build a transmission transmission project in any instance “required by state law, regulation or administrative order with regard to [transmission] enhancements or expansions … located within that state.” In FERC’s view, this provision contravened the ban in Order No. 1000 on rights-of-first-refusal. rights-of-first-refusal. In another case, FERC ruled that the transmission provider could not condition its acceptance of a proposed transmission project in a regional transmission plan 22
on approval of the project by all of the relevant state regulatory authorities by a specified date.
State Laws Cannot Be Ignored State laws may establish minimum qualifications that must be met by transmission line developers before they may build transmission facilities within a state. FERC Commissioner Tony Clark has therefore questioned the wisdom of rulings that may cause state laws to be ignored. He has said that the failure of a transmission provider to consider state laws when selecting a project for inclusion in the regional transmission plan “would require transmission providers to select a project … when it is unclear whether [that project] will be able to secure the necessary governmental approvals within the desired development schedule,” or where the project “may have no legal possibility of ever being built.” FERC’s rulings have alienated the National Association of Regulatory Utility Commissioners (NARUC). NARUC has interpreted FERC’s decisions as preempting state law over transmission siting and integrated resource planning, as well as reducing the role of states in the transmission planning process from that of a regulator with decision-making responsibilities to that of mere stakeholders providing input. The NARUC Board of Directors recently adopted a resolution concluding that “Order No. 1000, as implemented, inappropriately inappropriately infringes on State authority reserved by Congress over integrated resource plans, generation and transmission decisions, assurance of resource adequacy and reliability, and authorization and construction of new facilities.” State Concurrence with Transmission Plans Is Preferred Regardless of whether an OATT explicitly provides for consideration of applicable state laws governing transmission siting and construction during the transmission planning process, such state laws cannot be simply ignored. Logically, if state laws or regulations may cause certain entities to be disqualified from building new transmission facilities, it would be more efficient for transmission providers to consider such laws when developing a regional transmission expansion plan. The likely consequence of a failure to do so may be delay or rejection of desirable transmission projects. FERC’s ability to achieve its goals will be enhanced if it allows transmission providers to consider state policies when evaluating proposals for inclusion in a regional transmission plan and selecting transmission developers to construct each transmission project. James K. Mitchell (
[email protected]) — James (
[email protected]) is a partner in Davis Wright Tremaine LLP’s energy practice group in the firm’s Washington, D.C., office.
www.powermag.com
■
|
POWER December 2013
CIRCLE 16 ON READER SERVICE CARD
TOP PLANTS
Alqueva II Pumped Storage Hydropower Plant, Alqueva, Portugal Owner/operator: Energias de Portugal
Courtesy: Alstom
European Union carbon emission limitations and a lack of indigenous fossil fuel resources pushed Portugal in 2000 to embrace renewable energy. Today, Portugal supplies over 50% of its annual electricity demand from renewable resources, an increase of over 25% in the past five years alone. Leading Portugal’s renewable energy transformation is Alqueva II, a new pumped storage hydropower plant that supplies baseload electricity and backstops the large amount of variable wind generation in the south. Dr. Robert Peltier, PE
S
unny Portugal enjoys a climate much like that of Southern California and likewise has considerable wind resources. Unlike California, Portugal has virtually no indigenous fossil fuel resources (some coal, but no gas or oil), which has pressed the country to rapidly develop its wealth of renewable resources. Portugal’s success in converting an economy largely based on imported fossil fuels for electricity production to one based on renewable energy resources has been remarkable. In 2006, for example, fossil-fueled plants produced two-thirds of the country’s electricity consumption (~38% using imported oil and natural gas). Today, more than half its energy comes from wind, solar, and hydropower, having constructed the world’s largest solar farm, Europe’s largest wind farm and an extensive network of hydroelectric facilities. 24
In the Beginning Portugal’s push for renewables began in 2000 when the government purchased all the utilityowned transmission lines and formed a publically owned and traded company to operate the system. The purpose of this very controversial move was to encourage capital investment in upgrades and investment in smart grid technologies, a precursor to integrating renewables onto the grid. The plan also included a national system of electric car charging stations. Since the acquisition, over $600 million has been invested in grid upgrades. Unfortunately, the country’s economic malaise, punctuated by an International Monetary Fund and European Union bailout in May 2011 that required drastic public spending cuts, has undercut the rate of renewable expansion in Portugal. The reduction in energy consumption (averaging –6% per year for www.powermag.com
the past three years but down only 0.4% in the first quarter of 2013) during the economic downturn, combined with favorable weather conditions for hydroelectric power, resulted in Portugal’s renewable energy plants supplying 70% of total consumption in the first quarter of 2013, according the Portuguese grid operator. For a few hours in late 2011, the country’s entire electricity demand was provided by renewable electricity. The Alqueva hydropower plant is part of the government’s program of exploiting the country’s sizable renewable hydropower potential. By 2020, the government plans to construct 10 new dams with hydropower plants under the National Programme of Dams with High Hydropower Potential. Portugal’s official goal is to produce 60% of its annual electricity demand by 2020 with renewable energy. The hydropower capacity portion of the goal is 7,000 MW.
|
POWER December 2013
TOP PLANTS Portugal’s hydroelectric generating capacity increased 300% over 2012 because several important hydropower plants recently entered service. One major contributor to Portugal’s significant increase in hydroelectric electricity production was the recent inauguration of the Alqueva Alqueva II pumped storage plant. Construction Constructi on of the Alqueva Dam, located on the Guadiana River in southern Portugal, was completed in 2002, and the reservoir reached capacity in 2012. The Alqueva Dam constitutes one of the largest dams and artificial lakes (250 km �) in Western Europe. In addition to hydropower, the entire infrastructure provides agricultural irrigation water and the regional water supply, including a strategic water reserve during periods of extended drought. The entire hydropower plant is expected to produce up to 10 billion kWh per year, enough power to supply the surrounding towns of Evora, Beja, Portel, Moura, and Vidigueira. The 518-MW hydroelectric power station was constructed in two phases. Phase I (259 MW) was commissioned in 2004. In 2008, to meet the need for network regulation because of the booming growth of wind power in southern Portugal, Energia de Portugal (EDP) decided to double the hydropower capability of the Alqueva infrastructure. The Portuguese Minister of Environment, Agriculture and Sea, Assunção Cristas, commissioned 259MW Alqueva Phase II pumped-storage hydropower plant in January 2013 (Figure 1). Pumped storage plants use reversible
pump/turbines and motor/generators that can be used in two modes: either to generate electricity by transferring water from an upper reservoir to a lower one, or by storing energy by pumping water back into the upper reservoir, where it is stored and reused during peak electricity production hours. Pumped storage can recover about 80% of energy consumed in the overall energy cycle. Pumped storage plants also have very fast response to system load changes, which is necessary when balancing system loads dominated by unpredictable wind energy, as is the case in southern Portugal. “Alqueva II project was launched by EDP to develop power production through the effective use of Portugal’s natural resources. The successful completion of the Alqueva Alqueva II hydro power plant has proven once again Alstom’s capacity to execute state-of-the-art pumped storage power plants, and demonstrate our strong relationship with EDP,” stated Angelo Ramalho, president Alstom Portugal.
Project Features In 2008, EDP signed a contract with Alstom and its consortium partners EFACEC Engenharia S.A. and SMM for the construction of Phase II at a contract price of approximately €95 million (roughly (roughly $130 million). million). Alstom delivered and installed two new 130-MW reversible pump/turbine-motor/ generator units and other hydro-mechanical equipment for Phase II. In addition, Alstom delivered ring gates, governing
1. Renewable Ren ewable revolution. Portugal
has made significant progress in transforming its economy from reliance on fossil fuels to renewable energy, particularly wind and hydropower. The Alqueva Phase II project added a second block of 259 MW pumped storage capability to southern Portugal. The Alqueva Dam is one of the largest dams and artificial lakes in Western Europe. Its pumped storage capability is particularly important given the large amount of wind power present in the south. Courtesy: Alstom
|
December 2013 POWER
www.powermag.com
systems, excitation systems, and a static frequency converter and was responsible for the transportation, supervision of erection, and commissioning of the new units. Royal Haskoning performed construction management for the project. The entire plant is forecasted to run for approximately 2,100 hours in turbine mode and approximately 1,900 hours in pumping mode every year. Phase II doubled the output of the Phase I project, but the new addition was not identical to the first. Operating experience from Phase I plus advances in low-head design and performance for increased turbine efficiency, nearly maintenance-free bearing technology, and improved ring gate technology that reduces onsite construction were integrated into the design of the new addition. Hydraulic Design Improved. The Alqueva II hydraulic design improvements were facilitated by advances in computer modeling and computational fluid dynamics technology, as well as the latest pump turbine design processes. The new design of the turbine produced an average 0.6% increase in plant efficiency. Furthermore, for Alqueva II, the new hydraulic design adjusted the turbine performance curve to maximize output in the expected range of operation, especially at full load. New Thrust Thrust Bearings. Reliability of the bearing technology used in a hydropower plant is crucial to the machine’s overall reliability. The Alqueva pumped storage plant has been equipped with Alstom’s latest thrust bearing technology, which allows equal load distribution on each pad, regardless of frame deformation, shaft line deflection, or misalignment in all operating conditions. Alstom’s hydrodynamic thrust bearings use a self-regulating mechanism to carry the bearing pads. This approach resulted in a shorter installation time plus increased safety during operation and enhanced performance monitoring. Improved Ring Gates. Pump/turbines are usually protected by spherical or butterfly valves whose dimensions are often too large for low-head pump turbines such as at Alqueva. Ring gates are critical safety equipment for hydropower plants because they can shut off the flow of water to the turbine. Alstom’s ring gates reduce the construction work required for installation while retaining the safety and operational advantages of inlet valves. The ring gates used for Alqueva II have a diameter of 8.27 m and are 15 cm thick, which makes them among the largest ring gates ever deployed in Western Europe. ■ Dr. Robert Peltier, PE is — Dr. is POWER’s consulting editor. editor. 25
TOP PLANTS
Macarthur Wind Farm, Victoria, Australia Owner/operator: AGL Energy/Malakoff Corporation Berhad
Courtesy: Vestas
Fully commissioned in January 2013, the 420-MW Macarthur Wind Farm is the largest wind farm in the Southern Hemisphere. But sourcing and erecting 140 wind turbines for this massive project was logistically challenging and required a rethink on several levels. Sonal Patel
T
hough endowed with some of the world’s largest coal resources, Australia—whose southern coasts experience strong westerly winds called the “Roaring Forties”—also has wind power as a natural choice. For centuries, these powerful, largely unhampered west-to-east air currents, which are caused by a combination of air being displaced from the Equator towards the South Pole and the Earth’s rotation, helped speed ships sailing from Europe to Australasia. Today, they furnish hundreds of sites in South Australia with wind speeds averaging 8 or even 9 meters per second (m/s) at 50 meters (m) above the ground—giving the nation wind power resources that excel by world standards. Yet the country’s wind power sector is just gett ing star ted. At the end of 2012, 2012 , wind turbines with a total nameplate capacity of 2,548 MW supplied more than 7,700 GWh, or 3.4%, of Australia’s overall electricity demand. Wind’s outlook is healthy: The current renewable energy target (RET) set by the Australian government requires 20%—or more than 45,000 GWh—of the country’s total power generated to be sourced from renewables by 2020, and at 26
least 19 GW of new wind projects are in the pipeline. Industry analysts forecast foreca st the growth of wind power will be sustained despite the conservative Liberal Party’s sweep to power in the Sept. 7 election, which ended a six-year term led by the largely wind-supportive Labor government. Newly elected Prime Minister Tony Abbott has pledged to repeal the year-old national carbon tax of A$23 per metric ton of carbon dioxide equivalent emissions that was expected to last until July 2015, after which the country was to transition to an emissions trading scheme. But he has also pledged to shutter the publicly funded A$10 billion Clean Energy Finance Corp. (CEFC), and press on with a biennial review of the RET policy, begun in January 2010 and next due for review in 2014.
Thinking Big In this context, full completion last January of the 420-MW Macarthur Wind Farm in the southeastern state of Victoria, Australia’s Australia’s most noteworthy wind installation to date, marked a tremendous milestone for the country’s fledgling sector. More than 350 people were directly emwww.powermag.com
ployed during the 30-month construction of this A$1 billion project’s 140 wind turbines near Hamilton, about 245 kilometers (km) west of Melbourne—making it the largest investment in Australian renewable energy since the 1974-completed Snowy Mountains Scheme, a hydroelectric project widely considered an engineering wonder. Development of the Macarthur Wind Farm was initiated in 2007 by AGL Energy Ltd. (AGL) and its former 50:50 joint venture partner Meridian Energy, which is based in New Zealand. The project is now owned by AGL AGL and Malakoff Corporation Berhad. Though primarily built by a consortium comprising Australian infrastructure and mining firm Leighton Contractors and Danish wind turbine maker Vestas, a number of local suppliers also participated. Keppel Prince Engineering, from Portland, Victoria, for example, manufactured 80 of the 140 wind towers. The remaining 60 towers were supplied by Adelaide-based RPG Australia. But the project also necessitated an array of other local resources, including materials from nearby quarries and trucking companies, which supplied crushed rock and other materials for the 85 kilometers of internal roads and other materi-
|
POWER December 2013
Material Handling & Size Reduction Equipment and Systems for Coal and Biomass Power
Truck Truck Dumpers Dumpers & Receiv Receiving ing Bunkers Bunkers Positive Displacement Feeders Vibratory Vibratory Feeders Feeders Crushers & Sizers Screening & Processing Conveying & Material Handling Storage & Reclaim Boiler Fuel Feed Systems
CRUSH. FEED. PROCESS. CONVEY. STORE. CONVEY. STORE. TerraSource ™ Global offers three market-leading brands of material handling and size reduction equipment to the power industry, whether it be for coal-fired power generation or 100% or co-firing of biomass and alternative energy fuels.
Our Gundlach Crushers brand single-stage and two-stage double roll crushers crush coal at the mine mouth or preparation plant, or at coal-fired power stations. Our Jeffrey Rader brand material handling systems are used to unload, convey, screen and crush in the multiple stages of biomass energy generation, from truck/rail receiving through metered in-feed into the boiler. Phone: (855)
4-TERRA-1
Our Pennsylvania Crusher brand impactors, granulators, hammermills, single roll crushers and sizers are used in the size reduction of 75% of all coal processed through power plants in the United States and for multiple material reduction and processing applications in 79 countries around the world. Additionally, Additio nally, Pennsylvan Pennsylvania ia Crusher Crusher brand positive displacement feeders provide consistent, dust-free feeding of coal for improved plant safety.
The recently opened, 20,000 sq. ft., state-ofthe-art, TerraSource Global Demonstration & Development Center , located in Duncan, South Carolina, is our new, premier facility for conducting equipment demonstrations and materials testing. It’s just another way TerraSource Global ensures that our top-quality equipment, integrated systems and reliable services meet and exceed your expectations.
Email:
[email protected]
Web:
The brands brands compri comprisin sing g Terr TerraS aSour ource ce Global Global (Gundl (Gundlach ach Crushe Crushers, rs, Jeffre Jeffreyy Rade Raderr and and Pennsylvania Crusher) are wholly-owned subsidiaries of Hillenbrand, Inc. (NYSE: HI) © 2013 TerraSource Global. All Rights Reserved.
These three distinguished brands, recognized and trusted across the globe, are now available from a single source. Contact us today or visit our website for additional information. www.terrasource.com
Handling a World of Materials CIRCLE 17 ON READER SERVICE CARD
TOP PLANTS
1. The first buy. buy.
meetings to ensure the V112-3.0 MW platform was “the right solution for the project.”
als for the significant public road upgrades that were undertaken by project developers to ease transportation of a plethora of parts—including blades, nacelles, and hubs—imported to the Port of Portland from Denmark.
Finally, Finally, though it was “logistically complex,” complex,” Vestas and Leighton Contractors delivered the wind farm three months ahead of schedule (see table). As Vestas Construction Supervisor Gary Barret recalled, “We would jump over one hurdle and were confronted with another the day after.” after.” For one, the V112-3.0 MW turbine is the biggest wind turbine ever to be installed in Australia, and that brought about its own challenges—and eventually even changed the rules on inland oversized transport. “Transporting the longest blades and the heaviest nacelles required input from various government and local authorities, with public safety always at the forefront,” explained Leighton Contractors Logistics Manager Brendan Rowe. “No less than four separate stakeholders were involved with every one of the 1,120 oversized loads delivered to the Macarthur Wind Farm site.” Then, the project’s progress was almost thwarted by flooding that inundated the region during 2010–2011 because it significantly impacted the ability to build roads, hardstands, and foundations. “The excessive excessive rainfall led to the redesign of the road and hardstand construction, as well as extensive dewatering of all excavations until the end of the 2011 winter,” said David Mawhinney, a project manager with Leighton Contractors. “The wet weather also held up the installation of the meteorological masts at the beginning of the project. These are installed to collect three months of wind data before the wind turbines are erected. Consequently, we took the unusual step of hiring a helicopter to pour the masts’ concrete foundations.” foundations.”
The V112-3.0 MW wind turbines installed at the Macarthur Wind Farm were Danish wind turbine maker Vestas’ first sale of that turbine model (though not the first installed in the world). About 1,120 heavy lifts were required to join the tower sections, nacelles, hubs, and blades of the farm’s 140 turbines, each of which has a hub height of 85 meters (m) above ground and a rotor diameter of 112 m. The wind farm, in a region with average wind speeds of 7.6 7.6 m/s, has a capacity c apacity factor of 35%. Courtesy: AGL Energy
Siting and Procuring Permits The Macarthur Wind Farm’s 140 turbines are spread out across 5,500 hectares on three near-flat farms owned by separate landowners—a site chosen specifically because it has “a productive wind regime” and average wind speeds of about 7.6 m/s, says AGL. Those are speeds that the U.S. National Renewable Energy Laboratory would rank as class 5 or higher, with class 3 or greater designated as suitable for most utility-scale wind turbine applications. AGL AGL estimates the project’s capacity factor—the amount of power produced per year divided by the amount of power that would be produced if the wind turbines operated at full capacity all the time—is 35%. However, the site also offers proximity to a 500-kV transmission line for connection to the state grid, and it has good road access to the Port of Portland, from which most of its imported heavy equipment was trucked in, and where many of the wind turbine tower sections were manufactured. Developers then procured all necessary permits, including a state planning permit that set strict noise limits. Enforced by the th e Victoria Victoria State government, the permit requires noise monitoring to be carried out at specific neighboring buildings and that the noise level from an operating wind farm at any relevant nominated wind speed cannot exceed the background noise before the wind farm was built by more than 5 decibels (dBA), or a level of 40 dBA, whichever is greater. AGL has undertaken over 40,000 hours of noise monitoring, and according to the company, noise loggers installed between February and March 2013 for an objective as28
sessment confirm the wind farm remains compliant with these strict limits.
Newly Launched Technology Technology Yet another remarkable consideration that qualifies this project as a POWER Top Plant is that the Macarthur Wind Farm uses the world’s first purchased Vestas V112-3.0 MW wind turbine model (Figure 1). The deal between the wind turbine manufacturer and project developers for 140 of the newly launched turbines was cemented in August 2010, and it comprises a full engineering, procurement, and construction contract; a 10-year service agreement; and a VestasOnline Business supervisory control and data acquisition solution. For AGL, the choice to use Vestas’ new V112-3.0 MW was based on economics. It allowed the company to increase the wind farm’s capacity while reducing the number of towers from 174 to 140, said AGL CEO and Managing Director Michael Fraser. “This reduces the environmental footprint of the project and achieves substantial operating cost savings in excess of [A]$30 million over the [25-year] life of the wind farm.” Former co-developer Meridian Energy revealed that it did “extensive due diligence” through site visits and technical
Table 1. 1. Macarthur Wind Farm project schedule. Source: Leighton Contractors Date
Milestone
August 2010
Contract signed
MidMid-No Nove vemb mber er 201 20100
Site Site est estab abli lish shed ed
August 2011
Erection of first tower started
October 20 2011
First tu turbines ar arrive
Septe eptem mber 2012
First irst turb turbin inee com comm missi issiooned ned
October 2012
140th tower erected
January 2013
140th turbine commissioned
April 2013
Wind farm officially opens
www.powermag.com
Clearing Hurdles
More to Come For AGL, one of Australia’s largest private owners and operators of renewable energy assets, the now-completed Macarthur project serves as a “base” on which to build a sustainable energy future. But while Meridian funded its debt portion of the Macarthur investment with an award-winning project finance agreement, the company this June sold its interest in the farm to Malakoff Corporation Berhad, a Malaysian power generator and retailer. According to Meridian Chief Executive Mark Binns, the company’s investment was intended to be held over the full-project term, but a “low interest rate environment and the opportunity to invest in further wind farms in Australia provided a compelling reason to look at a sale and the reinvestment of funds in future renewable generation options in Australia.” ■ Sonal Patel is a POWER associate edi- — Sonal tor (@sonalcpatel, @POWERmagazine).
|
POWER December 2013
CIRCLE 18 ON READER SERVICE CARD
TOP PLANTS
Mesquite Solar 1, Maricopa County, Arizona Owners/operators: Sempra U.S. Gas & Power and Consolidated Edison Development
Courtesy: Sempra U.S. Gas & Power
Sempra U.S. Gas & Power’ Power ’s jointly owned Mesquite Solar 1 project added 150 MW of photovoltaic-generated electricity to the grid in January 2013, making it one of the largest PV projects of its type in the country. Sempra U.S. Gas & Power’s longterm plan is to expand the facility to 700 MW. Dr. Robert Peltier, PE
C
alifornia has been pursuing renewable generation since enactment of its Renewable Portfolio Standard (RPS) in 2002, which had the goal of increasing renewable generation to 20% of the state’s electricity mix by 2017. That goal was codified in 2006. In the meantime, the 2003 Integrated Energy Policy Report (IEPR) recommended accelerating the schedule to 20% by 2010, a plan that utilities were ill prepared to meet, principally because of transmission limitations. The following year, the 2004 IEPR again recommended an update to the plan, advancing the goal to 33% by 2020. ThenGovernor Arnold Schwarzenegger signed Executive Order S-14-08 in Nov. 2008 requiring retail sellers of electricity to comply with the new RPS standard. The RPS was codified when Governor Edmund G. Brown, Jr. signed SBX1-2 in April 2011. The RPS standard applies to all publicly owned utilities, investor-owned utilities (IOUs), electricity service providers, and community choice aggregators. 30
There has been marked progress toward the RPS goal during the past few years. As of December 2012, California’s three large IOUs reported that they serve 19.6% of their 2012 retail sales with RPS-eligible renewable energy, energy, slightly less than the compliance goal of no less than 20%. Sempra Energy’s Energy’s wholly owned subsidiary San Diego Gas & Electric, at 20.31%, was the only California IOU to meet the 2011–2013 renewable energy goal. Another 2,800 MW of renewable energy is scheduled to enter service in California during 2013, and more than 644 MW came online in the first quarter of this year. At 150 MW, the largest of those new projects was Sempra U.S. Gas & Power’s Mesquite Solar 1. Power from Mesquite Solar 1 is being sold to California’s Pacific Gas & Electric under a 20-year-contract.
Solar Industry Leader Sempra Energy, a Fortune 500 energy services holding company, is the parent of project developer Sempra U.S. Gas & Power (a www.powermag.com
consolidation of Sempra Energy’s U.S. operations outside of its California utilities, completed in January 2012) and the regulated public utility San Diego Gas & Electric. Sempra U.S. Gas & Power has a very strong history among developers of utility-scale PV projects, going back to the completion of the company’s first solar energy project—the 10-MW El Dorado Solar PV plant in Boulder City, Nev. That plant was named a 2009 Top Plant winner for its well-designed integration with the adjacent El Dorado Energy gas-fired combined cycle plant. I wrote at the time, “El Dorado is Sempra Energy’s first solar power generation project but will likely not be its last.” Indeed, POWER also named Sempra U.S. Gas & Power’s Copper Mountain Solar 1, adjacent to the El Dorado facility, a 2011 Top Plant. That plant entered service in December 2010. At the time of the award, the 48-MW plant was recognized as “the largest photovoltaic plant in the U.S.” Since then, the smaller plant has been in-
|
POWER December 2013
TOP PLANTS corporated into the larger one, now referred to as the 58-MW Copper Mountain Solar 1. Today, the company is constructing two additional phases of the project, Copper Mountain Solar 2 and Copper Mountain Solar 3, with 308 MW currently under construction. Both projects are slated for completion in 2015. Sempra U.S. Gas & Power hits the POW ER award trifecta in 2013 with its jointly owned Mesquite Solar 1 project. The 150MW facility was constructed on 920 acres of a 4,000-acre site in Maricopa County, Ariz., an hour and a half drive west of Phoenix. Construction of the plant began in June 2011. The first three blocks of solar panels totaling 42 MW entered service in late Dec 2011 with the remainder of the 150-MW first phase connecting to the grid in late 2012. At that time, Mesquite Solar 1 became one of the largest PV projects in the U.S., although that record was later eclipsed by another installation. The plant is expected to operate with an ~27% annual capacity factor producing ~350 GWh per year. A video describing the development and construction of the project is available at www.semprausgp.com/energy-solutions/ solar-mesquite-solar.html. However, as you read above, bragging rights are short-lived, because there always seems to be a bigger PV project in the works. Mesquite Solar will surely reacquire those bragging rights, because early development to expand the facility to a massive 700-MW PV installation installation is ongoing. The PV facility is also adjacent to Sempra U.S. Gas & Power’s jointly owned 1,250-MW Mesquite Power Generating Station, a 4 x 2 gas-fired combined cycle plant that was, as you may have guessed by now, a POWER Top Plant in 2004. The completion of Mesquite Solar 1 moves Sempra U.S. Gas & Power closer to its goal of investing in 1,850 MW of renewables to its power generation portfolio by 2017. Since announcing progressively increasing targets starting in early 2011, the company along with its strategic development partners has installed, started construction on, or secured long-term utility contracts for more than 800 MW of additional solar and wind capacity. capacity. “We are pleased to continue the momentum of our solar program with the completion of Mesquite Solar 1 and will now focus on the development of the remaining 4,000acre complex,” said Jeffrey W. Martin, president and chief executive officer of Sempra U.S. Gas & Power. “This accomplishment puts us solidly on track to own and operate more than 1,000 megawatts of renewable energy capacity by the end of this year [2013]. We are excited about the future.”
|
December 2013 POWER
1. Carpet the desert. Mesquite Solar 1 is a 150 MW solar power plant located about 70 miles west of Phoenix, Ariz. The facility’s 830,000 solar panels cover about 920 acres or 1.4 square miles. Courtesy: Sempra U.S. Gas & Power
Massive in Scale The scale of Mesquite Solar 1 is, to say the least, large. The 830,000 panels cover acreage equivalent to 680 football fields (Figure 1). Mesquite Solar 1 uses Suntech Power Holdings Co. multi-crystalline solar panels with Pluto cell technology that converts sunlight into electricity at 20.3% efficiency. Suntech, headquartered in China and the world’s largest producer of PV panels, provided 830,000 polycrystalline solar modules for the project. In fact, Mesquite Solar 1 is located only about 30 miles from Suntech’s former Goodyear, Ariz. manufacturing facility, which supplied a portion of the panels for the plant. Engineering, design, and construction were handled by Zachry Holdings Inc., a familiar name in fossil-fueled power plant construction. Zachry has diversified its project portfolio to include renewable projects, such as Mesquite Solar 1. Inverters and transformers are normally used to convert the direct current produced by the PV panels into alternating current suitable for the grid. However, Mesquite Solar 1 is one of the first utility-scale PV sites to use Advanced Energy’s AE 500NX inverter. The inverter is modular in design and uses a closed air-to-liquid cooling, a desirable feature for a plant located in the desert. Each inverter handles up to 500 kW and does not require an enclosure for cooling. Better still, the advanced bipolar design does not require a built-in transformer, yet makes the conversion to 420 VAC at weighted efficiency of 97.5% with a reliability >99%. The Advanced Energy inverters include reactive www.powermag.com
power and power factor control features and low-voltage ride-through capability. capability. Each Solaron inverter can handle up to 10 input feeds. Four Solaron inverters are combined into an ~2 MW skid, which also include a single 2-MW transformer, breakers, and a DCS cabinet. Multiple skids are combined at the main facility transformer where the voltage is increased to match the grid voltage at the nearby Hassayampa switchyard, a major energy hub for the Southwest. Almost one million linear feet of underground cable were used to interconnect the panels and inverters. The panels are installed on Schletter’s ground mount fixed-tilt system. Approximately 85,000 steel piers support the groundmount PV system, each embedded four feet into the ground. The posts are galvanized steel and the panel frames are aluminum. Emerson supplied its Ovation distributed control system to manage the plants control and monitoring functions. Fiber optic cables interconnect the control room with the switchgear and inverter skids. Arizona may be the hub of solar electricity development in the U.S. because of its ample sunshine, but the California RPS and other subsidies also play an important role in developing these massive solar projects. In September 2011, the Federal Financing Bank provided a $337 million loan for the development of the first phase of the $600 million Mesquite Solar 1 project. The U.S. Department of Energy provided the loan guarantee. ■ Dr. Robert Peltier, PE is — Dr. is a consulting editor for POWER. 31
TOP PLANTS
Polaniec Green Unit, Polaniec, Poland Owner/operator: GDF SUEZ Energy Poland
Courtesy: GDF SUEZ
When Gérard Mestrallet, chairman and CEO of GDF SUEZ, set a target of doubling the company’s renewable energy capacity from 2007 to 2013, it seemed very ambitious. Projects like the Polaniec Green Unit have helped the company reach its goal with room to spare. Aaron Larson
H
istorically, Poland has relied heavily on coal for electricity generation. International Energy Agency statistics show that coal generation accounted for 86.5% of total electric power production in 2011. The Polaniec facility has been an important contributor to that total over the years. The plant, built in the late 1970s, began with eight 200-MW coal-fired units. Through an upgrade process, all the units were increased to 225 MW by 1995, giving the facility a total capacity of 1.8 GW. Like many other European Union members, the Polish government has committed to changing its energy st rategy. The country identified several areas of focus, including improving efficiency, enhancing security, introducing nuclear, developing competitive markets, reducing environmental impact, and increasing the use of renewable energy sources. On Nov. 10, 2009, Poland’s Council of Ministers adopted a new energy policy consistent with those goals. One of the objectives of the policy was to increase the use of re32
newable energy sources in the country’s country’s final energy consumption to at least 15% by 2020 with further increases in the following years. The Polaniec Green Unit provides a reliable and consistent electricity supply, which supports that policy.
Bit by Bit a Shift to Biomass Grzegorz Gorski, CEO of GDF SUEZ Energy Poland has commented that “10 years ago the idea was born, to do something better for the environment and change the fuel mix.” The plant began to slowly add biomass to the blend, increasing the amount almost every year. “It was a logical step to make a fully dedicated unit,” he added in a YouTube video. So in 2007, the owners worked with Tractebel Engineering to develop a feasibility study. Recommendations were made regarding the process and selection of cutting, drying, and milling technologies. technologies. Suggestions were based on safety aspects and the capability to meet required particle size distribution. www.powermag.com
With this information in hand, the company pressed forward, having Tractebel prepare an Environmental Impact Assessment (EIA). The EIA looked at the possible replacement of one of Polaniec’s coal-fired boilers, Unit 8, with a new biomass-fired circulating fluidized bed (CFB) boiler. In April 2010, a contract was signed with Foster Wheeler to design and construct the new unit.
Biomass Boiler Design The Foster Wheeler design allows a variety of biomasses to be burned efficiently and still meet tight environmental regulations. Foster Wheeler’s Advanced Bio CFB (ABC) technology enables a mix of 80% wood and 20% agricultural by-products to be used for fuel in the Polaniec Green Unit. Foster Wheeler considers its ABC technology to be state of the art for biomass combustion. The ABC concept is the result of continuous research and experience from more than 400 commercial CFB references. Foster Wheeler’s responsibility for the project included designing and supplying the
|
POWER December 2013
TOP PLANTS steam generator, auxiliary equipment, and biomass yard, as well as carrying out civil works, erection, and commissioning of the boiler island. Polish regulations require a minimum of 20% agro biomass, which includes a variety of materials, such as straw, sunflower pellets, dried fruit (marc), and palm kernel shells. A major concern in the design process was the high-alkali content of this agricultural biomass. Pilot testing was conducted to determine if the advanced agro CFB concept would perform adequately under these conditions. The design passed with flying colors. The Polaniec boiler has solids separators built from steam-cooled panels integrated with the combustion chamber, which avoided heavy refractory linings in the separator. The final superheating and reheating stages are located in special enclosures at the bottom of the furnace, adjacent to the main combustion chamber (Figure 1). Because they are located outside the main combustion area, they are protected from the fouling and corrosive environment of the boiler’s hot flue gas, thus resulting in higher steam temperatures. The design also provides good load-following capabilities and turndown ratios. The ABC technology uses moderate fluidizing velocity in the furnace and features a full-step grid design in order to transfer heavy unfluidized particles effectively into the bottom ash removal system. “The unit is indeed unique, as i t is one of the largest in its sector,” said GDF SUEZ Chairman and CEO Gérard Mestrallet.
Table 1.
Design performance data are for O 2 6% in dry gases, emissions guarantees 50% boiler maximum continuous rating, 24-hour average. Source: Foster Wheeler Description
Value
Flue gas exit temperature
148C (298.4F)
Boiler efficiency
91.0%
NOx
<150 mg/Nm3
SO2
<150 mg/Nm3
CO
<50 mg/Nm3
Particulate matter (dry)
<20 mg/Nm3
“It’s a very original, ultra-modern unit. It features fluidized bed combustion, which is really at the cutting edge of combustion technology.”
Other Major Contracts The plant utilizes the Ovation distributed control system, supplied by Emerson Process Management. The system can handle 6,000 I/O points and includes the AMS Suite predictive maintenance software. A complete chipping line, which included a drum chipper and corresponding handling equipment, was supplied to the plant by BRUKS Klöckner GmbH together with Polimex Mostostal Warszawa. Alstom was awarded a contract to retrofit the existing steam turbine to optimally match the new biomass configuration. In mid-2012, Alstom parlayed that work into a contract worth approximately €65 million ($89.6 million) for modernization of Units 2 through 7. Alstom also has an option to retrofit Unit 1, but the decision on whether to move forward
1. Side view of Polaniec boiler. Source: Foster Wheeler 1 - Step grid 2 - Final SH and RH 3 - Conservative flue gas velocity and effective temperature control 4 - Steam cooled solid separator and return leg 5 - Optimal convective heat transfer surfaces and correct flue gas temperature
4
5
3
1
December 2013 | POWER
with that upgrade is not expected until 2014. The upgraded steam turbines will increase efficiency and allow for capacity ratings of over 240 MW per unit, which will also significantly reduce CO 2 emissions from the rest of the facility. facility.
Emissions Control While GDF SUEZ is the largest independent power producer in the world, with over 117 GW of installed capacity and 7.2 GW more under construction, the company has developed a management approach designed to limit its environmental impact. It has embraced a strategy that targets 20% of electric generation capacity from renewables and has also optimized the energy efficiency of its production facilities in an effort to fight climate change. The Polaniec Green Unit is a flagship plant that demonstrates the company’s commitment to this strategy. The boiler utilizes a low and uniform temperature profile in the furnace and staged combustion to help control emissions. Additionally, it is equipped with an ammonia injection system and catalyst—selective noncatalytic reduction plus selective catalytic reduction—for controlling the nitrogen oxide emissions. An electrostatic precipitator is used for controlling particulate emissions. With these measures, the Green Unit can adequately meet the required emission limits noted in Table 1. Replacing the original coal-fired boiler in Unit 8 with the Green Unit enabled the project to meet its goal of saving almost 1.2 million tons of CO 2 annually. As the world’s largest biomass-fired CFB boiler, the Polaniec Green Unit is a well-qualified POWER Top Plant. The unit began commercial operation on Nov. 15, 2012, six weeks ahead of schedule. “It’s a beautiful showcase,” said Jean-François Cirelli, vice chairman of GDF SUEZ, “All the ingredients are there for it to be a success.” ■
— Aaron Aaron Larson is a POWER associate editor (@AaronL_Power, (@AaronL_Power, @POWERmagazine).
2
www.powermag.com
33
TOP PLANTS
Shams 1, Madinat Zayed, United Arab Emirates Owner/operator: Shams Power Co.
Courtesy: Masdar
The Arabian Peninsula might seem like the ideal location for a concentrating solar power plant, but developers of the 100-MW Shams 1 CSP project in the UAE—the world’s largest at its inauguration in March—found that things were nowhere near that simple. Thomas Overton
T
he small nation of the United Arab Emirates (UAE), despite having the world’s seventh-largest proven reserves of both oil and gas, has been working hard to diversify its economy over the past two decades. Though hydrocarbons still account for the large majority of its economic activity and more than 80% of government revenue, it has managed to significantly reduce the share of hydrocarbons in its total export figures. But the rapid growth of its financial and international trade sectors over the past decade has meant equally rapid growth in electricity demand, which has stretched the UAE’s UAE’s grid to its limits. According to International Energy Agency estimates, the UAE’s electricity consumption in 2011 was 83.79 TWh, a more than 50% increase since 2001. Installed capacity, almost entirely natural gas–fired thermal plants, was 23.25 GW in 2009, according to the Energy Information Agency. Despite its ample gas reserves, the UAE is also working to diversify its generation portfolio, having contracted with Korea Electric 34
Power Corp. to construct four nuclear reactors, two of which are now under construction, with the first scheduled to come online in 2017 and the others expected to be completed by 2020. The country is also looking to boost renewable generation. To this end, Abu Dhabi, the largest emirate, formed the Masdar initiative in 2006, with a focus on development of renewable and sustainable energy technologies. Masdar is a subsidiary of Abu Dhabi’s state-owned Mubadala Development Co. Masdar’s flagship project is Masdar City, which aims to be the world’s first low-carbon low-carbon municipality. Located just outside the capital, it currently houses the Masdar Institute, a joint effort with the Massachusetts Institute of Technology. Technology. A number of other high-technology and renewable energy businesses and organizations are planning to set up shop in Masdar City, among them, the International Renewable Energy Agency, Agency, Siemens Middle East, and GE. Masdar has invested in a variety of renewable energy projects, most nowww.powermag.com
tably a 20% share in the 630-MW London Array in the UK, currently the world’s largest offshore wind farm. Still, the overall goal of Masdar is to diversify the emirite’s energy sector. In the late 2000s, it began planning for a major solar power plant in the UAE to be called Shams— “Sun” in Arabic.
No Simpl Simple e Task While a desert location might seem like the ideal spot for a concentrating solar power (CSP) plant, in fact, making one work in such an area carried with it a number of significant challenges that the designers had to overcome in planning the project. The original design for Shams 1 was proposed in 2007, and Masdar tendered the project for bids in 2008. Because the coastal areas of the UAE are at a premium in terms of occupancy and land values, and because such areas have lower insolation, the project needed to be located in the southern region of the country. These areas, however, are characterized by loose and
|
POWER December 2013
TOP PLANTS sandy soil, high winds, and high dust levels, as well as large rolling sand dunes. Early research for Shams revealed that, because of the dust in the atmosphere, the site had surprisingly low direct normal irradiance (DNI) levels of under 2,000 kWh/m 2 /yr. /yr. This is quite quite a bit less than that received by CSP projects in Spain and the U.S., where DNI levels can reach 2,700 kWh/m2 /yr. /yr. Initia Initiall estima estimates tes of DNI for the site—based on satellite data—had been substantially higher, which meant that adjustments needed to be made in the design. This discovery led Masdar to withdraw the tender and go back to the drawing board. The designers also realized that the high dust levels meant more frequent cleaning of the mirrors would be necessary, and overall reflectance of the mirrors would be lower. Studies had to be conducted to determine the level of soiling the mirrors would experience. Two approaches were developed to combat the problem of higher mirror soiling. First, a seven-meter-high seven-meter-high windbreak was built around the entire site to reduce the amount of ground-level sand and dust blown onto the mirrors. After extensive research, project planners settled on a design composed of both concrete and semi-porous fencing material. In addition to reducing windblown dust, the windbreak reduces the wind load on the mirrors and limits the movement of the sand dunes around the site. Second, additional automatic mirrorcleaning trucks were added to the operations and maintenance plan in order to increase the frequency of cleaning. This allowed the entire site to be cleaned in a three-day cycle. But the additional cleaning implicated another challenge of the location: An extreme shortage of water. Though water used for cleaning the mirrors is collected and recycled to the extent possible, the project team had to consider a number of approaches for meeting the site’s water needs, not just for cleaning but also for cooling the steam cycle. Coastal areas of the UAE rely largely on desalinated water, but the high cost of it, combined with the 60-km distance from ocean, made piping or shipping water to the site far too expensive. The use of gray water for plant cooling was studied but found to be unworkable. All of this meant that an air-cooled condenser (ACC) would be necessary (Figure 1). However, However, while this would greatly reduce water requirements, it would also reduce the plant’s efficiency, as ACCs do not function as well in very hot climates such as the one at this site, where summer temperatures can exceed 120F. These challenges meant that several changes would be needed to the design of the plant if it was to be able to meet its specified output. First, additional solar collectors were
|
December 2013 POWER
1. Hot air. With water at a premium at the desert site, Shams 1 employs an air-cooled condenser to condense the steam from the turbine. Courtesy: Masdar
added to the original design. Next, a high-efficiency steam turbine was custom-designed by MAN to allow operation at high turbine efficiencies at the higher vacuum pressures that would exist at high operating loads. Finally, the use of natural gas firing was changed. In typical CSP plants, natural gas is often burned to smooth out intermittency during cloudy periods. At Shams, however, low levels of gas are burned continuously to increase steam temperature from the 380F maximum from the solar collectors to 540F. This higher temperature increases the overall efficiency of the plant. In normal operation, natural gas contributes about 18% of the total heat input but about 45% of the net electricity output. Abundant, inexpensive inexpensive natural gas in the region makes the approach economic. Abengoa Solar and Total were selected in 2010 to develop Shams 1 on a 25-year build, own, operate basis. Masdar owns 60% of the Shams Solar Power joint venture, with the other two holding 20% each. Construction began in June 2010, and the $600 million project was completed in late 2012. The 2.5 km 2 plant comprises 768 parabolic trough collectors that heat synthetic oil that is used to produce steam in a Foster Wheeler solar steam generator for the 125-MW MAN turbine. The air-cooled condensers were supplied by GEA. Overall, the design changes actually make Shams 1 about 3% to 8% more efficient than a typical CSP plant, despite the challenges of the site.
An Important Regional Symbol One key goal of the Shams project is unrel ated to renewable energy. Like other countries in the Gulf region, the UAE relies heavily on foreign labor: Estimates are that less than 1% of the private workforce is Emirati. While the majority of the construction force www.powermag.com
was not local, efforts were made to foster local skills and local employment. More than 60 local companies were involved in the construction, many of which were formed specifically for the project. A number of Emiratis also worked with Abengoa’s CSP projects in Spain to gain the necessary skills to work at Shams. Currently, 30% of the plant workforce is Emirati, and plans are to increase this to 40% over the next two years. Local students will be trained at the plant until they are ready to join the staff. The importance of Shams to the UAE can be judged from the sentiments of Sheikh Khalifa bin Zayed Al Nahyan, president of the UAE and ruler of Abu Dhabi, who officially inaugurated the plant in March. “Shams 1 is a strategic investment in our country’s economic, social and environmental prosperity,” prosperity,” he said. “The domestic production of renewable energy extends the life of our country’s valuable hydrocarbon resources and supports the growth of a promising new industry.” At the time of its inauguration, Shams 1 was the largest CSP plant in the world, though it has since been eclipsed by projects in the U.S. At the dedication ceremony, Masdar CEO Dr. Sultan Ahmed Al Jaber said, “We are now producing close to 10% of the world’s installed CSP capacity and almost 68% of the GCC [Gulf Cooperation Council] region’s renewable energy capacity. The UAE has become the first country in the Middle East and OPEC to produce both hydrocarbons and renewable energy.” For taking the lead in renewable energy in a fossil-fuel dominated region despite numerous challenges, Shams 1 is a deserving POWER Top Plant. ■ Thomas W. Overton, JD is POWER’s gas — Thomas technology editor (@thomas_overton, @ POWERmagazine). 35
RENEWABLES RENEW ABLES IN I N CHINA
A Plan for Optimizing Technologies to Supp Support ort Vari ariabl able e Rene Renewab wable le Generation in China Between 2011 and 2015, China plans to add eight major wind generating bases with a total capacity of 65 GW and two solar photovoltaic ph otovoltaic installations exexceeding 10 GW. GW. With all that variable generation planned, the nation must determine how to integrate it into the grid while ensuring grid stability. Researchers from North China Electric Power University propose a plan that takes into consideration the best options on a regional basis. Zeng Ming, Li Shulei, and Xue Song
R
ecently, the variable generation (VG) industry has been strongly promoted in China to advance sustainable energy development, especially for wind power and solar photovoltaic (PV) power, which have entered rapid development periods. For example, wind power installed capacity in China doubled every year for four consecutive years beginning in 2006, while large-scale solar PV power plants have been integrated with the grid since 2010. But more is to come. According to the country’s renewable energy development plan, the eight biggest wind power developments will gradually be constructed during the 12th Five-Year Plan period (2011–2015) in Hebei, west Inner Mongolia, east Inner Mongolia, Jilin, Shandong, Jiangsu, Jiuquan, and Hami. The installed capacity of each base may exceed 10 GW, and the total capacity will reach 65 GW. Additionally, two massive PV power bases will be constructed from 2020 to 2030 in Jiuquan and Qaidam basin, each with an installed capacity exceeding 10 GW. Those wind and PV developments are mainly located in Northeast China, North China, and Northwest China, where wind and solar resources are abundant. The Chinese government has issued a series of regulations, such as the Renewable Energy Law, to guarantee renewable power integration. In China, regions abundant in wind and solar energy are usually remote areas far from load centers and the main grid. Therefore, a current major initiative to solve integration and demand problems is constructing more large-scale transmission lines to enable VG power consumption over a wider area so as to make use of the large-scale and concentrated wind power and solar power bases (Figure 1). 36
Variable energy sour ces such as wind and solar have characteristics of randomness, intermittency, and low capacity coefficient. Additionally, local load consumption ability is limited, which challenges the local and region power systems’ safe and stable operation. These problems become more significant as installed wind power capacity increases. The first problem concerns power system security. Eighty wind turbine tripping accidents occurred in 2010, and 193 wind turbine tripping accidents occurred by August 2011. The second problem is that wind power is difficult to integrate into networks. The installed capacity of wind power accounted for 3.06%, while power production from wind
only accounted for 1.18% of total generation, and this number still hadn’t exceed 2% by the end of 2011. Construction of large-scale transmission lines could help distribute variable energy over a wider range for more-distant use. Now the primary problem is to determine the optimal supporting technology investment program to back up VG and solve the safety problems posed by VG integration. The determination of peak-shaving power supply type and scale, as well as demand-side management and cross-regional transmission management are involved. Hence, a technoeconomic evaluation of VG resource integration supporting technology investment program is needed.
1. Solar siting. The 320-MW Longyangxia solar photovoltaic power plant is located in Qinghai Province in Northwest China and is owned by China Power Investment Corp. Courtesy: Ding Haisheng, China Power News Network
www.powermag.com
|
POWER December 2013
RENEWABLES IN CHINA
The Technical Technical Roadmap The approach that we propose has several steps. First, the project would collect relevant available information concerning distribution, installed capacity, and integration of variable power. Then it would analyze the difficulties and challenges with VG integration from a technical level. Next, we propose possible supporting technology investment programs and make techno-economic evaluations of them. Finally, we would sort the various programs according to assessment results, make final optimized decisions, and make recommendations for relevant state policies. The project collects data by referring to information disclosed by the departments in charge, such as the Bureau of Statistic in China and China Electricity Council. Data needed here mainly concern wind power, solar power, power, and hydropower distribution; variable power installed capacity and on-grid energy; VG integration in each region; and the relevant supporting technology parameters.
2. Wind density map of China. Courtesy: Zeng Ming, Xue Song, Ma Mingjuan, Zhu Xiaoli. “New energy bases and sustainab sus tainable le development in C hina: A review.” Renewable & Sustainable Energy Reviews, 2013, 17:169–185
>200W/m2 (High) 150-200W/m2 100-150W/m2 50-100W/m2 <50W/m2 (Low)
Analysis of o f VG Integration Challenges As a research basis for determining appropriate supporting technologies for VG integration, we first analyze difficulties and challenges posed by integrating VG into networks from a technical level. After collecting data—including grid operation data, peak and valley differences and peaking power units data before wind power was integrated into networks— we can analyze the impacts of wind power on system operation from the following angles. Wind Power’ Power’s s Impacts Impa cts on Grid Voltage Level. First we plan to study the geographical and temporal distribution characteristics of VG and energy demand, so as to make clear the impacts on grid voltage of largescale variable power integration. Existing data show that the wind energy resource and energy demand are distributed in a reverse direction. That means that large volumes of wind power would need to be transmitted long distances to load centers for consumption, which may cause great voltage dips, followed by local grid instability and reduced stability margin. In turn, grid voltage stability limitations also restrict the maximum installed capacity and output of wind farms. Wind’s Impacts on Grid Short-Circuit Current. Wind power units with common asynchronous generators or doubly fed induction generators are widely used in Chinese wind farms, which affects short-circuit current in a different way from traditional synchronous generators when there is a short-circuit fault on the grid. In this phase, we would analyze the influence of the integration of common asynchronous generators
|
December 2013 POWER
3. Distributio Distribution n of the eight planned large wind power bases.
Courtesy: Zeng Ming, Xue Song, Ma Mingjuan, Zhu Xiaoli. “New energy bases and sustainable develop- ment in China: C hina: A review revi ew..” Renewable & Su stainable staina ble Energy Energ y Reviews, 2013, 17:169–185 17:169–185
Base in Mengdong
Base in Xinjiang, Hami Base in Gansu, Jiuquan
Base in Jinlin
Base in Mengxi Base in Hebei
Base in Shandong
Base in Jiangsu
www.powermag.com
37
RENEWABLES IN CHINA and doubly fed induction generators on grid short-circuit current through field research. Wind’s Impacts on Grid Power Quality.. Wind speed fluctuation is quite obvious in ty Northwest China, especially on the Tibetan Plateau. We would take the Northwest Grid as the example to analyze the output power fluctuation of integrated wind power units resulting from the random fluctuation of wind speed as well as the turbulence, wake effect, and tower shadow effect during wind power units’ operation. Power quality problems such as voltage fluctuation and flicker would also be analyzed. Wind’s Impacts on Grid Stability. To study this issue, we would take the Northwest Grid, which has high wind power capacity as an example, studying the impacts that wind power integration has on original power flow distribution, line transmission power, and system inertia. When analyzing the influence of wind power integration on grid transient stability and frequency stability, we will discuss its effects on main grid voltage stability. Wind’s Impacts on Equivalent Peak and Valley Valley Difference. Difference. When When studying wind power integration, we could consider wind farm output as negative load. Therefore, we could get the equivalent diurnal load curve through associating the diurnal variation
curves of wind farm output and load, so as to observe the peak-valley variation. In this analysis, we take typical days in Baicheng in Jilin Province, which belongs to the Northeast Grid, and in Shaanxi, Gansu, Qinghai, and Ningxia, which belong to Northwest Grid as examples to analyze net load (load minus wind power production) peak and valley difference changes, impacts on peaking power and frequency modulation, and grid operation cost changes. Wind’s Impacts on Regional Power Grid Peak Shaving. Existing Shaving. Existing local units are mainly used in China for peak shaving. Relevant standards regarding interregional load trading and settlement are absent in China so far. In this analysis, we first would analyze hydropower, hydropower, large-scale gas-fired generation, fast-response coal-fired units, and pumped storage plant installed capacity and the roles they each play in peak shaving. At the same time, considering that wind power is mainly concentrated in North China (which suggests peak-shaving resources such as cogeneration units should also meet users’ heating demand in winter), we will take northeast areas as examples, analyzing impacts on regional power grid peak shaving while integrating large-scale wind power into networks on winter nights.
arkline Small Metal Buildings www.parkline.com
1.800.786.4855
Call today to find out how the industry leader in metal building manufacturing can provide the perfect solution for you!
Wind’s Impacts on the Entire Grid Network. Wind Network. Wind power integration in China now is of large scale, long distance, and high voltage. With the development of even more wind farms, wind power accounts for an increasingly larger percentage of installed capacity, and its influence on the grid is expanding from partial regions. Consequently, we plan to conduct a statistical analysis of wind power installed capacity integrated into distribution and transmission networks. Then we would assess impacts on overall grid security and stable operation while wind power is integrated into the grid through transmission networks. Requirements for Demand-Side Management and Interregional Transmission. Considering the energy distribution sion. characteristics and the development of largescale variable energy resources in China, it’s urgent to improve interregional resource allocation optimization ability and to enhance demand-side management (DSM) to achieve interregional transmission. In this phase, we will focus on analyzing the impacts on wind power consumption and energy utilization efficiency enabled by DSM enhancement and interregional transmission. We will also study the necessity of DSM and interregional transmission for VG integration.
Techno-economic Evaluation of Technologies Technologies to Support VG Integration During the 12th Five-Year period, the eight biggest wind power bases will gradually be constructed in Hebei, west Inner Mongolia, east Inner Mongolia, Jilin, Shandong, Jiangsu, Jiuquan, and Hami. The installed capacity of each base may exceed 10 GW, and total capacity could reach 65 GW. Bases in Jiangsu and Shandong will mainly focus on offshore wind power development. The distribution of wind resources in China is shown in Figure 2; distribution of the eight largest wind power bases is shown in Figure 3. After analysis of the difficulties and challenges posed by grid-integrated variable generation and initial investigation of the distribution of wind resources and load, we could address those challenges by developing four typical planning programs: Northeast China (high wind power, low load), Northwest China (high wind power, lower load), North China (high wind power, high load), and East China (high wind power, power, higher load). Heilongjiang, Jilin, Liaoning, and east Inner Mongolia are included in Northeast China, which is abundant in hydropower with low local load. Xinjiang, Gansu, and west Inner Mongolia are included in Northwest China, which is rich in coal, with low load level as well. North China contains Hebei,
CIRCLE 19 ON READER SERVICE CARD 38
www.powermag.com
|
POWER December 2013
RENEWABLES IN CHINA
4. The plan at a glance. This flow chart shows the proposed stages of a techno-economic evaluation of technologies that could be used to support the integration of large-scale variable renewable energy (predominantly wind power) in China. Source: Zeng Ming, Li Shulei, Xue Song
Northeast China
Northwest China
Hydropower, large-scale gas-fired generation, 600-MW coal-fired unit, and pumped storage capacity plus a combination of investment programs for these technologies
Hydropower, large-scale gas-fired generation, and 600-MW coal-fired unit capacity plus a combination of investment programs for these technologies
Analyze the exploitable wind power capacity and the fixed growth rate
Select the alternative programs
Calculate the investment cost, rate of return, and payback period for each program and conduct a sensitivity analysis
Make techno-economic evaluations of the programs
North China
East China
Large-scale gas-fired generation, 600-MW coal-fired unit, pumped storage, and battery energy storage capacity (including electric vehicles) plus a combination of investment programs for these technologies
Assess the impacts on the power system of the programs and their social benefits
Hydropower, large-scale gas-fired generation, pumped storage, battery energy storage (including electric vehicles), and combined cooling, heat, and power capacity as well as demand-side management and a combination of investment programs for these technologies
Sort the programs
Program optimization Interregional transmission (from Northwest China to East China)
Shandong, and Jiangsu and possesses a certain amount of pumped storage resource with high local load. Zhejiang and Shanghai are in East China, rich in pumped storage resource with rather high local load. Based on both national and international research sources, we determined that technologies supporting VG integration in China mainly consist of hydropower, large-scale gas-fired generation, 600-MW coal-fired units (now coal-fired units under 300 MW capacity are shut down to meet the requirement of energy conservation and emission reduction, which makes 600-MW coal-fired units the main peak-shaving resource), pumped storage plants, battery energy storage technologies (including electric vehicles), distributed generation technologies, DSM, and
|
December 2013 POWER
interregional transmission technology. technology. It is important to note that already-installed capacity of technologies supporting VG integration and wind power capacity is not considered here; we only consider newly added future capacity. capacity. A flow chart of the techno-economic evaluation of technologies supporting VG integration in China is shown in Figure 4. Brief discussions of specific considerations for each region follow. For each region, the techno-economic evaluation of the proposed technologies involves involves five steps: 1.
We begin by analyzing the exploitable wind power capacity in the region and determine the capacity of the backup technology needed per MW of gridwww.powermag.com
2.
3.
integrated wind power. We also look at construction and maintenance costs for the technologies used to support VG integration. Based on the wind power development plan, we assume that newly added wind power capacity increases at a fixed growth rate, and we evaluate a number of investment programs based on the technology options for each region. We calculate the initial investment cost of the selected programs, the rate of return, and payback period under existing tariff and settlement systems through techno-economic evaluation theory and methods. Additionally, we will make sensitivity analysis of those 39
RENEWABLES IN CHINA
5. Transfer of power power plan. This map of the regions with the greatest wind power potential shows recommended substation and transmission line placement for optimizing the transfer of variable power to higher-demand regions. Source: Bo Zeng, Ming Zeng, Xue Song, Min Cheng, et al. “Overall review of wind power development in Inner Mongolia: St atus quo, barriers and solutions, solu tions,” Renewable & Sustainable Sustainabl e Energy Reviews, 2013, 29: 614-624
Thermal power plant Wind Farm
Xilingol League
500 kV substation for power collection Existing 500 kV substation and transmission line
Central of Wulanchabu League wind power collection station
New 500 kV substation and transmission line
e r o w e r d p i o n n n o i o w o t p w n o a a t t i s n g o i n d s t a t i o n i w a e t w z c i n S o l l e o i o i n g c t c i q e J l e l o c Baotou
±800 kV DC substation and transmission line ±600 kV DC substation and transmission line
Alashan League
Bayannaoer League
To Chengde
City To Guyuan To Wanquan
Wulanchabu League Hahhot City
To north China (East China)
Ordos City
Shanxi Province
Gansu Province Ningxia Hui Autonomous Region Shaanxi Province
4.
r o w e n n d p t i i o n i o w g n s t a a m e n c t i i o o X i m e e l l l o c
investment programs. We will evaluate the impacts on system operation, equivalent peak and valley difference, and peak shaving by those investment programs. Social benefits also need to be evaluated, evaluated, especially the energy conservation and carbon emissions benefit.
5.
Hebei Province Beijing
To south of Heibei Province
To South China (East China)
We will make a comprehensive evaluation of the total investment cost, internal rate of return, payback period for investment, and social benefits. Considering that there is a national sustainable development plan for energy utilization and that tax incentive measures may be issued, we will only
consider the relevant investment programs in this phase. Northeast China. Considering resource distribution characteristics, uneven load distribution, and the low load in Northeast China, we select four VG integration supporting technologies for techno-economic
Thousands of enclosures Hundreds of options Designed and delivered in 10 days
ENCLOSURES
POWER DISTRIBUTION
CLIMATE CONTROL
CIRCLE 20 ON READER SERVICE CARD 40
www.powermag.com
|
POWER December 2013
RENEWABLES IN CHINA evaluation: hydropower, hydropower, large-scale gas-fired generators, 600-MW coal-fired units, and pumped storage. Northwest China. Considering resource distribution characteristics, the area’s richness in coal and water resources, uneven load distribution, and lower load, we select these three VG integration supporting technologies for techno-economic evaluation: hydropower, large-scale gas-fired generators, and 600MW coal-fired units. North China. Considering resource distribution characteristics with the absence of a large coal power and hydropower base, even load distribution, and high load level, we select these five VG integration supporting technologies for techno-economic evaluation: large-scale gas-fired generators, 600-MW coal-fired units, pumped storage, and battery energy storage technologies (including electric vehicles). East China. Considering resource distribution characteristics with rich water resources, even load distribution with high load level, and the region’s high dependence on cross-province transmission, we select these six VG integration supporting technologies for techno-economic evaluation: hydropower, large-scale gas-fired generators, pumped storage plants, battery energy storage technologies (including electric vehicles), and CCHP (combined cooling, heating, and power).
Evaluation of Interregional Transmission Technology Technology Programs In China, regions that are abundant in wind and solar energy usually have low load levels (for example, the Northwest Grid). That
IT INFRASTRU INFRASTRUCTURE CTURE
combination contributes to limited ability for local energy consumption, wind power abandonment, and low energy utilization efficiency. A smart grid with an ultra-highvoltage grid as its backbone network is being built in China to achieve VG integration via large-scale interregional transmission over long distances with high efficiency to enable remote consumption—typically, in East China (Figure 5). In considering this challenge, we will propose an interregional transmission plan considering relevant issues to improve VG consumption levels and increase energy utilization efficiency. We will also take the ultra-high-voltage transmission line from Northwest China to East China as an example to evaluate possible economic and environmental benefits.
From Evaluation to Implementation After comprehensively assessing the results of the techno-economic and social benefit evaluations of the various technology options for supporting VG integration in each region, and accounting for renewable energy policies and their trends, we will select and propose the preferred investment plan for VG integration supporting technologies in each region. As investors are usually encouraged by economic interests, we should make investment decisions according to each program’s technoeconomic evaluation results. For programs economically viable and with good social benefits, the government should support market-oriented investments, while the government’s main duty is to conduct market regulation. As to programs not economically viable but with good social socia l benefits, benef its, the gov-
ernment should introduce incentive measures—such as tariff compensation, direct subsidies, or preferential loans—to support investments. Programs economically viable but with poor social benefits could be treated as options. Programs not economically viable and with bad social benefits should be abandoned.
Goals and Impacts If this project is successfully implemented as outlined here, the project is expected to have three main benefits. First, it could provide a decision-making basis for the Chinese government that could help it determine the appropriate combination of technologies for supporting VG integration and their capacity when a certain amount of wind power is put into production. That could contribute to maximizing the amount of grid-integrated VG. Second, it could provide an investment decision-making basis for players in the market and help improve investment efficiency. Third, mature experience concerning large-scale and concentrating VG exploitation and long-distance transmission is absent at present. If this project is successfully implemented, the research results can provide a reference for other countries. ■
Zeng Ming , Li Shulei , and Xue Song — Zeng (
[email protected]) (
[email protected]) are all with North China Electric Power University, Beijing. The work described in this article was supported by National Science Foundation of China (NSFC) (71271082), The National Soft Science Research Program (2012GX- S4B064), and The Energy Foundation (G-1006-12630).
SOFTWARE & SERVICES www.rittal.us
|
December 2013 POWER
www.powermag.com
41
RENEWABLES
Photovoltaics Photovoltaics Overshadow Concentrated Solar Power Though much newer, solar photovoltaic photovolt aic technology has gained a much larger market share than concentrated solar power, even though the latter promises thermal storage and the potential to be almost fully dispatchable. Sonal Patel
A
s solar technologies, both solar photovoltaic (PV) and concentrated solar power (CSP) are often discussed collectively, along with solar thermal and solar fuels. But the difference between the two power generating technologies that have evolved independently for decades is significant: CSP harnesses irradiative solar energy, which is easily transformed into heat through absorption by gases, liquids, or solid materials and is then converted to mechanical energy and finally electrical energy, while PV uses solar radiation, which is essentially a flux of elementary particles that promote photoreactions and generate a flow of electrons. Technology-agnostic solar industry observers note that both technologies are today approaching “grid parity” as solar utilities around the world develop them with “relative” success. But solar PV has vastly overtaken CSP’s market share, and will prevail for a long time. At the end of 2012, the world’s PV installations totaled 32 GW—compared to a cumulative 2.9 GW of CSP capacity, the bulk concentrated in Spain (68%) and the U.S. (28%). Of the 1,176 MW of utility-scale solar ca pacity in the U.S. at the beginning of 2012, about 43% came from concentrated thermal technology while 57% came from PV—but PV accounts for 72% of solar projects under construction. And while 2012 was a banner year for the world’s CSP sector, sector, marking the most installations—more than 1 GW—over a 12-month period in the technology’s 135year history, experts forecast that growth spurt will be short-lived, overshadowed primarily by plunging prices of PV panels and a variety of hurdles that are stalling the still relatively small sector. At least 7.3 GW of new CSP capacity is in various stages of preconstruction development in the U.S., the Middle East and North Africa, and in China, India, and Australia. Saudi Arabia, notably, will lead a longerterm charge with its ambitions to generate 75 42
to 110 TWh by 2032, which could require the installation of 25 GW of capacity in Saudi Arabia alone. Yet, PV’s growth is slated to soar to a staggering 41 GW by 2014—an expansion that will be undertaken by “all major world regions,” regions,” according to market research firm IHS.
A Cost Disparity The paramount reason for this market share
disparity is cost. According to the International Energy Agency, CSP received a minuscule 7% share of public research and development (R&D) funding from the Organisation for Economic Cooperation and Development countries for renewables in 2010, compared to 36% for solar PV and 28% for wind. This is why, some experts say, innovation in the CSP field has been limited and patent rates declined signifi-
1. In a new light. Spain led the world with 1.95 GW of installed concentrated solar power (CSP) capacity at the end of 2012 2012 and generated 5,138 GWh from 42 plants: 37 parabolic trough, three tower, and two Fresnel plants. Spanish companies are also putting up a number of the CSP plants worldwide, like Abengoa SA’s $2 billion Solana parabolic trough plant, which came online near Gila Bend, Ariz., this October. That 280-MW plant built with a $1.45 billion U.S. federal loan guarantee uses a thermal storage system to produce power power for six hours at full power. power. Courtesy: Abengoa SA
www.powermag.com
|
POWER December 2013
RENEWABLES
The Evolution of CSP Since the world’s very first concentrating solar thermal systems were developed in 1878 by French inventors Augstin Mouchot and Abel Pifre, the fundamental quest for solar thermal energy developers of a great variety of designs and applications has been to increase working temperatures. Today, four different technology approaches focus the sun’s energy onto mirrors to create steam t o drive a turbine that generates power: ■
■
■
■
Trough systems, which use large, U-shaped (parabolic) reflectors that heat oil-filled pipes running along their center, or focal point, as high as 750F. The parabolic trough is today the most mature of CSP technologies and forms the bulk of current commercial plants (Figure 2). Power tower systems, also called central receivers, which use many large flat heliostats to track the sun and focus its rays onto a tower-mounted receiver. The receiver heats a fluid, such as molten salt, to temperatures of up to 1,050F to make steam or store energy for days before being converted into electricity. Dish/engine systems, which use mirrored dishes nearly 10 times larger than a backyard satellite to focus sunlight onto a receiver that is integrated into a high-efficiency “external” combustion engine outfitted with thin tubes containing hydrogen or helium gas. Linear-Fresnel reflectors, which approximate the parabolic shape of trough systems but use long rows of flat, or slightly curved, mirrors to reflect the sun’s rays onto a downward-facing linear, linear, fixed receiver.
Mouchot’s and Pifre’s inventions were based on dishes, though the parabolic trough was invented soon after, in 1884, by American engineer John Ericsson. In 1897, another American engineer, neer, Frank Shuman, demonstrated a solar engine that worked by reflecting solar energy onto collector boxes filled with ether— which has a lower boiling point than water—and later, an improved system using mirrors to reflect solar energy onto boxes
cantly between 1977 and 2000. Moreover, CSP is a capital-intensive technology whose initial investment is dominated by solar field equipment and labor. Accounting for 84% of electricity generation costs of CSP, initial investment requirements range from $2,500 to $10,200/kW, depending on capacity factor and storage size. In contrast, solar PV’s initial investment costs range from $3,500 to $6,000/kW. The remaining 16% for CSP typically consists of fixed operation and maintenance costs, which average $70/ kW per year, while variable maintenance i s limited to about $3/MWh. Cost concerns are also possibly the most plausible reason why investment in CSP is substantially lower than for PV: In 2011, the
|
December 2013 POWER
2. CSP projects by type. Parabolic
trough plants account for the majority of operational capacity due to cost advantages, but solar tower systems are also increasing, accounting for 52% of planned projects. The first large-scale linear-Fresn linear-Fresnel el plant is already in operation in Spain (Puerto Errado 2), but dish systems are still at an early stage of development. Source: IEA Solar Paces database, March 2013
Operational Operational
Under construction
Planned
71.4%
15.9%
28.6% 25.8%
26.9%
17.6% 7.4%
Trough
Tower
2.7%
0.8%
0.3% 1.8% 0.6%
Linear Fresnel
0.04%
Dish
filled with water. He also developed a 560-W low-pressure steam turbine and, in 1912, set up the world’s first solar power thermal power station in Meadi, Egypt, using parabolic troughs troughs to power a 60- to 70-horsepower engine that pumped 6,000 gallons of water per minute from the Nile River to nearby cotton fields. In contrast, PV’s evolution has been much more recent. The first photovoltaic technology capable of providing sufficient power to electrical equipment—a primitive version with an efficiency of only 4% that cost $300/W to produce—was invented in 1954 by the Bell Telephone Laboratories. Solar PV got its boost with the space age, after the U.S. launched its first satellites into space. Finally, in 1970, a solar cell was developed that tamped down the price of energy from $100/W to $20/W—a breakthrough that made it realistic to use solar applications for residential use.
sector garnered just $18 billion worldwide, while PV got $125 billion.
A Vulnerable Sector As with most dawning technologies, the economic crisis hit CSP particularly hard as governments reconfigured subsidies and imposed austerity measures, forcing developers to rethink projects or convert to PV. For Spain, the only European Union member to have developed a CSP production sector, and a country that spurred the world’s concentrated solar technology revival in the second half of the 2000s, CSP’s future has all but been eclipsed by both a moratorium on financial aid imposed by the Spanish government earlier this year and the government’s intention to retroactively redefine www.powermag.com
plant remuneration terms. At the end of 2012, though Spain commissioned 17 new plants to bring its total CSP capacity up to 1.95 GW—and all within the last five years—the future of at least six new plants hangs in the balance as Spanish CSP developers have been forced to turn to other countries to develop their technology (Figure 1) and bring down production costs on their own. Protermosolar, the country’s CSP industry association, bemoans the government’s measures that it says came before the nation’s CSP sector could become as competitive as other generation sectors.
More Stringent Requirements Added to cost concerns are a number of 43
RENEWABLES obstacles. According to the U.S. National Renewable Energy Laboratory (NREL), generation-weighted averages for total land area requirements range from 3.2 acres/ GWh per year for CSP towers to 5.3 acres/ GWh per year for Stirling dish CSP systems; large (>20 MW) PV systems require between 2.8 and 3.4 acres/GWh. But not only must CSP plants be installed at larger scales to be cost-effective, cost-effective, they also need higher levels of irradiance—which means siting is limited in the U.S. to the Sunbelt—and access to water. water.
That also means they can take years to permit and connect to the grid. In fact, CSP needs a tremendous amount of water for cooling processes—up to 3,780 liters/MWh for Fresnel installations and 2,835 liters/MWh for solar towers, compared to just 19 liters/MWh for PV— and this in turn has environmental implications in arid and semi-arid areas. However, at least four large plants with dry cooling technology—which promises to reduce water consumption by more than 90% (but
Power to Provide a World of Services Look to NAES when safety, compliance, quality,, reliability, schedule and efficiency quality efficienc y make a difference. Growing via innovative and customer-focused services: Operations & Maintenance Engineering & Technical Support Major Maintenance Construction Services Turbine Field Services Staffing Services
For more information, contact NAES at 425.961.4700 or email sales@ naes.com www.naes.com
Energy People Making Energy Facilities Work - Better
increase generation costs by 5%)—have come online this year alone: three Integrated Solar Combined Cycle (ISCC) plants in Hassi R’mel, Algeria; Kuramayat in Egypt; and Ain Beni Mathar in Morocco; plus the 100-MW Shams 1 in the United Arab Emirates—a POWER Top Plant (see story on p. 34). Significantly, PV has a number of standalone smaller applications, attributable to its low maintenance requirements and low costs. One reason for PV’s extensive market growth has been its suitability for residential power supply, points out pro-solar community resource group, the Principal Solar Institute. “In fact, photovoltaics have found a place meeting a broad spectrum of energy needs. While large-scale photovoltaic projects are competing with traditional utilities to meet consumer demand at one end of the spectrum, smaller residential projects are working to replace them at the other end,” it says.
The Promise of Thermal Storage Perhaps CSP’s saving grace could be its most formidable advantage over PV, which is its ability to store thermal energy for up to 16 hours. Innovations are expected in all four CSP technologies (see sidebar) and throughout the system value chain as research and development is focused on improving dispatchability. According to Romeu Gaspar, founder of energy consulting firm X&Y Partners, “Dispatchability will be increasingly important when and where renewable energies achieve high penetration rates, so two things can happen: CSP becomes a commercially viable solution before a commercial PV storage system is developed, carving its own market segment; or the PV industry quickly solves the storage issue and becomes the solar technology of choice.” Other experts point out that CSP is also bett er suited sui ted to hybrid hyb ridizat izat ion with wit h com plement ple ment ary solar sol ar and fossil fos sil fuel fue l primar pri mary y energy sources. And it can be applied to a number of niche industrial processes to desalinate water, improve water electrolysis for hydrogen production, generate heat for combined heat and power applications, and support enhanced oil recovery operations. That means CSP isn’t going to disappear from the market altogether, the Principal Solar Institute says. The future of CSP will depend on its stronghold at the utility scale, “where no amount of PV cost-reduction is expected to overcome its inherent technology advantages.” ■ Sonal Patel is — Sonal is a POWER associate edi- tor (@sonalcpatel, @POWERmagazine).
CIRCLE 21 ON READER SERVICE CARD 44
www.powermag.com
|
POWER December 2013
June 3-5, 2014 Atlantic Atla ntic Cit City, y, NJ
Sheraton Atlantic City Convention Center Hotel
Dedicated to the Advancement of the Offshore Renewable Energy Market Every year, year, hundreds of the most influential players in the industry attend Energy Ocean to strategically collaborate on new technologies, regulation, financial opportunities, case studies and research to work towards the advancement of ocean energy. You should be there too. Across 3 days, you’ll gain gain access to:
Cutting-edge presentations presentations led by speakers from key offshore offshore renewable energy development projects and organizations organizations such as Flumill, BOEM, Schottel Tidal and the Cape Wind Project. Premier exhibitors showcasing the newest innovations in products and services for the industry. industry. A highly interactive format format to deliver unprecedented networking networking opportunities opportunities between thought thought leaders, executive-level attendees and industry leading companies.
Take advantage of this once a year opportunity and come join the industry on June 3-5, 2014 to discover what’s next.
Register now to reserve your seat at www.energyocean.com VIP Cod Code: e: 23050
EMISSIONS
Optimized SCR Catalysts Maximize Mercury Removal Co-Benefits New air emission rules limit the amount of mercury (Hg) air emissions from coal-fired power plants. Many plant owners may find leveraging the Hg removal co-benefits available from SCR Hg oxidation and FGD Hg collection a more attractive option than constructing new equipment or using other expensive mitigation technologies. Chris Bertole, PhD and Scot Pritchard
T
he new Mercury and Air Toxics Standards (MATS) have given coal-fired power plant owners a short time to bring their plants into compliance with rules that require significantly less mercury (Hg) in stack gases emitted into the atmosphere. MATS applies to U.S. plants, but the move to reduce power plant mercury emissions has gone global. In January 2013, after four years of negotiations, 140 nations signed the first legally binding agreement to control mercury emissions from power plants (and many other sources and products). The official signing of the Minamata Convention (named after a city in Japan that experienced environmental environmental damage caused by industrial mercury discharges into local rivers) is scheduled for October of this year. New rules are expected to go into force over the next three to five years, with full effect by 2020. Flue gas from coal-fired power plants may contain Hg in three different species or forms. First, the Hg may be in particulate form (Hg P), which is typically removed with the ash and unburned carbon in an electrostatic precipitator or fabric filter. Second, the Hg may be in oxidized form (Hg 2+), which is water-soluble and can be removed by a wet flue gas desulfurization system (FGD). The Hg may also appear in its elemental form (Hg 0), which is not water-soluble and usually passes unchanged straight through most air quality management systems and into the atmosphere. The potential synergy from combining SCR and FGD technologies for mercury removal has been known for some time. Data collected during the Environmental Protection Agency’s Agency’s (EPA (EPA’s) Information Collection Request Reques t campaigns in 1998, 2005, and updated in 2009, showed that mercury capture in bituminousfired units with cold-side electrostatic precipitators increased from about 36% to 75% when a wet FGD was also in service. The data also showed that the amount of Hg removal increased to >95% with the SCR in-service 46
compared to when it was in bypass. More recent studies have produced similar results (see “Determining AQCS Mercury Removal Co-Benefits,” in POWER’s July 2010 issue and “An SCR Can Provide Mercury Removal Co-Benefits,” Co-Benefits,” October 2011). 20 11).
You Have Options The two most familiar options to reduce mercury emissions are a high capital cost retrofit with equipment specifically designed for mercury removal (such as TOXECON) or using an expensive combustion gas additive, such as activated carbon injection (ACI), that will adsorb the mercury for capture in a downstream filtration system. The effectiveeffectiveness of both approaches is highly dependent on the type of fuel consumed by the plant. A third option, the use of existing equipment, or “co-benefit option,” can be the most cost effective: leverage air quality control equipment already in place at most coal-fired plants to produce the necessary Hg reduction without an extended plant outage required for an equipment retrofit. This two-step approach occurs by first oxidizing the Hg 0 present in the stack gas as it passes through the SCR and then removing the Hg 2+ in the FGD. In many cases, the catalyst used in the SCR must be optimized for site-specific conditions to achieve the desired Hg 0 oxidation rate and therefore the overall mercury removal efficiency. In addition, recent advancements in FGD technology and additives help to prevent re-emission of the captured oxidized mercury. Another option is to utilize supplemental mercury capture using sorbents such as ACI in combination with the existing equipment. This option can be used to increase mercury removal efficiency where specific plant equipment and/or conditions do not allow optimization of the SCR/FGD co-benefit. Cormetech recently commercialized its Oxidized Mercury Emissions Technology www.powermag.com
(COMET) that can be used to characterize reactor performance for a set of plant-specific features and fuels, determine the correct catalyst formulation so that NO x removal rates remain unchanged, and provide a specific catalyst management plan to obtain the required levels of mercury oxidation through the SCR. The potential mercury removal cobenefits and cost savings can be substantial.
SCR Hg Oxidation Co-Benefit The SCR of NO x using NH3 as the reductant for V2O5 - (WO3 or MO3)/TiO2 catalysts is the current best available control technology for NOx emissions from coal-fired utility boilers. SCR has demonstrated NO x removal efficiencies of 90% or more. The primary NO x reduction reaction proceeds according to the stoichiometry described by the following two equations (note that NO x levels in the flue gases from coal-fired boilers typically contain >90% NO). Equation 1: 4NO + 4NH 3 + O2 à 4N2 + 6H2O Equation 2: 2NO + 2NO 2 + 4NH3 à 4N 2 + 6H2O SCR catalysts are also active for the oxidation of Hg0 by chlorine as HCl and/or by bromine as HBr, as described by Equation 3 for HCl. The conversion of Hg 0, which is water-insoluble, to HgCl 2 or HgBr 2 (watersoluble oxidized mercury Hg 2+) allows for capture of mercury in a downstream flue gas desulfurization system. Equation 3: 2Hg 0 + 4HCl + O2 à 2HgCl2 + 4H2O
SCR Does Double Duty Differences between NO x and Hg removal performance must be considered within and
|
POWER December 2013
EMISSIONS surrounding the SCR. From an SCR perspective, de-NO x performance is well defined and controlled within the SCR reactor by catalyst selection, cross-sectional area, number of modules, and so on. However, total Hg removal must carefully consider the mercury removal performance of equipment downstream of the SCR, such as the air heater, particulate control device(s), and the FGD. A number of system-level factors relative to characterizing and understanding catalyst performance must also be considered (Table 1). Cormetech’s early product development work to quantify the co-benefits SCR + FGD mercury removal used a mercury activity test reactor system in conjunction with a multilayer catalyst system to perform multiple parametric tests. For example, one set of tests characterized layer position and halogen content for a given catalyst. Tests were also conducted on new as well as aged catalysts taken from operating plants. This critical data enables accurate prediction of catalyst Hg oxidation performance for unique applications. Typical Typical results from those tests show that NOx reduction is a strong function of the operating temperature of the reactor and the
Table 1. Key factors that influence SCR de-NOx performance and Hg oxidation performance. Of particular importance are the concentrations of halogens and reducing agents, such as CO and NH3, present in the stack gas. Halogens, whether present in the fuel or as an additive, favorably influence SCR catalyst performance. The ammonia concentration is a function of the desired de-NO x performance, layer position, and chemistry. Source: Cormetech Inc.
HCl present in the gas. In addition, the Hg 0 oxidation to Hg 2+ is a strong function of the halogen content (HBr) and operating temperature (Figure 1).
Catalyst Design and Selection Traditional catalyst management techniques provide very accurate predictions of de-NO x performance for various fuels and fuel additives. At the heart of the catalyst management process for de-NO x is a simplified method to describe catalyst oxidation potential, shown in Figure 1 and represented by Equation 4. Equation 4: K de-NO x /AV /AV = ln (1– deNOx efficiency), where K de-NO x = catalyst de-NOx activity, AV = area velocity, α = NH3:NOx molar ratio = 1 The addition of mercury oxidation as a performance feature of the SCR adds complexity to the management process where both de-NO x and Hg oxidation needs must be
managed simultaneously. Thus it is important to develop equations and tools to accurately model mercury oxidation performance as has been done with de-NO x. Again, a simplified approach to describe catalyst oxidation potential is shown in Figure 1 and represented by Equation 5. Equation 5: K HgO x /AV /AV = ln (1– Hg0 oxidation) at α = variable, where K HgO x = catalyst Hg oxidation activity and AV = area velocity Although the equations are similar, the usefulness of the equation for Hg oxidation is influenced to a greater extent by the ammonia concentration. Therefore, instead of simplifying the assessment to one molar ratio, multiple molar ratios must be considered to properly assess the performance capability of a given catalyst layer in a particular position within the reactor. Plant-specific conditions related to fuel parameters, such as halogen
1. MATRS test data. The SCR Hg 0 oxidation
rate is a function of halogen content and temperature (right). The SCR performance of the same catalyst is shown for comparison (left). The parametric studies used fresh and field-aged catalyst. Source: Cormetech Inc. 400C 340C 100 100 90
90
80
80
70
70
) %60 ( n o50 i t a d i 40 x o g30 H
) 60 % ( 50 x
O N40 e d
30 20
20
10
10
0
0 0
20
40
60 80 HCl (ppmvda)
100
120
0.0
0 .5
1.0 1.5 HBr (ppmvda)
2.0
2. 5
De-NOx
Mercury
NOx inleta
NOx inlet
Efficiencya
NH3 efficiency
CO MET versus a standard stan dard de-NO x catalyst 2. COMET catalysts perfor perform. m. Test results of COMET
Slipa
NH3 slip
Temperature
Hg oxidationa
SO2 conversionb
Temperature
illustrate a significant improvement in Hg 0 oxidation rates. The ability of the catalyst to oxidize mercury is represented by the K HgO x, the catalyst oxidation activity (Equation 5). The data was taken at 403C; 107 ppm of NO x; 3.5% O 2; 14% H2O; 245 ppm SO2; and 8 ppm of HCl. Source:
Fuel Fuel-> ->co cont ntam amin inant antss->K >K/K /Koo
SO2 conversionb
Reactor condition
Fuel->contaminates ->K/Ko
O2, H2O, SO2 (lower impact)
Reactor condition Halogen (fuel or additive) Layer position (NH3)
Cormetech Inc.
Standard 2 x O g H
1.5
K e v i t 1 a l e R
0.5
0
CO O2, H2O, SO2 (can be larger impact) Notes: a. Performance threshold; b. Catalyst formulation
|
December 2013 POWER
COMET
1
2
3
4
5
6
7
8
9
10
NH3
ppm
0
0
0
0
0
21
21
21
21
86
CO
ppm
0
100
0
100
0
0
0
100
0
0
HBr
ppm
0
0
0. 1
0.1
1
0
0.1
0.1
1
0
www.powermag.com
47
EMISSIONS
3. Baseline management plan. A baseline performance curve where de-NO x and Hg0 oxidation performance requirements are well synchronized is illustrated at top, with de-NO x = 85%, Hg0 oxidation rate = 70%, and maximum NH3 slip is 2 ppm. This baseline catalyst management plan shows that a standard catalyst could be used to meet both target performance requirements. The center chart illustrates the impact of a rise in the target Hg 0 oxidation from 70% to 80% after 70,000 operating hours. In this situation, the 80% Hg oxidation requires injection of a halogen. The bottom chart chart represents the impact of a change in the target Hg 0 oxidation from the baseline of 70% to 90% after 70,000 operating hours. In this case, a catalyst r eplacement was required to achieve the Hg oxidation target. Source: Cormetech Inc. De-NOx efficiency
SCR outlet oxidized Hg
NH3 slip )
10
% 100 (
9
90 H
8
80
) 7 m p 6 p ( p i l 5 s 3 H 4 N
70
3
30
2
20
1
10
g
60 50 40
0 0
20,000
40,000
60,000
80,000
100,000
0 140,000
120,000
Operating hours
Target 80% ox. Hg Action: Inject halogen
x
O N e D
)
10
% 100 (
9
90 H
8
80
) 7 m p 6 p ( p i l 5 s 3 H 4 N
70
3
30
2
20
1
10
g
60 50 40
0 0
20,000
40,000
60,000
80,000
100,000
0 140,000
120,000
Operating hours
Target: 90% ox. Hg Action: Initially change 2 layers to max. length COMET and repeat for layer 3
10
d e z i d i x o t e l t u o R C S , ) % ( y c n e i c i f f e x
O N e D
)
% 100 ( g
9
90 H
8
z 80 i
) 7 m p 6 p ( p 5 i l s 3 H 4 N
70
3
30
2
20
1
10
60 50 40
0 0
20,000
40,000
60,000
80,000
100,000
0 140,000
120,000
Operating hours
CIRCLE 22 ON READER SERVICE CARD
48
d e z i d i x o t e l t u o R C S , ) % ( y c n e i c i f f e
www.powermag.com
|
d e d i x o t e l t u o R C S , ) % ( y c n e i c i f f e x
O N e D
POWER December 2013
EMISSIONS and Hg concentration, also need to be established in the same way as the traditional inputs for de-NO x, such as temperature, inlet NOx, O2, H2O, SO2, and SO 3. The optimal SCR catalyst design for a given unit will maximize the rates of the de-NO x (Equations 1 and 2) and Hg oxidation (Equation 3) reactions, while minimizing the rate of the SO2 oxidation reaction, SO2 + ½O ½O2 à SO3. Routinely, Routinely, SCR catalyst is formulated to a maximum allowed SO 2 oxidation rate to minimize the negative effects of high SO 3 caused by air preheater plugging or opacity concerns (visible plume), while continuing to meet the de-NOx and NH3 slip requirements. In other words, the de-NO x reduction is limited by the expected SO2 oxidation. COMET is designed to function within these de-NO x operational constraints without impacting its mercury reduction function. Other factors impact the catalyst design, such as Hg 0 oxidation that occurs across the air preheater, the efficiency efficiency P 2+ of Hg removal, the Hg capture efficiency in the FGD, HCl and HBr concentration in the flue gas, SCR operating temperatures (particularly for cycling and load-following units),
and so on. Figure 2 illustrates improvements that have been made in Hg oxidation performance as a function of key input parameters, specifically NH 3, CO, and halogen content, while maintaining constant de-NO x and SO 2 conversion conversion rates.
Managing Catalyst Performance Once SCR de-NO x and Hg 0 oxidation targets are established, catalyst management options can be explored. Figure 3 presents a series of catalyst management strategies over the lifetime of a catalyst. Figure 3, top, illustrates a typical baseline catalyst management plan with a de-NO x rate of 85% and an Hg 0 oxidation rate of 70%. If at some time in the future the desired Hg 0 oxidation rate were increased from 70% to 80% at 70,000 hours of operation, then the catalyst management plan would be modified to increase the halogen injection (Figure 3, middle). If the required removal rate were to increase from 70% to 90% at 70,000 hour of operation then a catalyst change would be required (Figure 3, bottom). Note that combinations of additives and catalyst de-
sign options would also be considered when updating the catalyst management plan to achieve the most cost-effective system or to add additional operating flexibility to the unit. Figure 3 illustrates a single catalyst management plan responding to a hypothetical change in the required mercury removal rate in the future. There are many other combinations available than just those illustrated. The SCR can be tuned should Hg removal rates be ratcheted up again in the future or if there are other operating changes in the plant, such as a fuel switch. More aggressive emissions rules are likely in the future, so the best upgrade path for many plants is to keep their future options open and capital costs low. COMET is a highly flexible, cost-effective compliance strategy for a unit, plant, or even an entire fleet of coal-fired facilities. ■ Chris Bertole, PhD (bertolecj@cormetech. — Chris
com) is catalyst development manager and Scot Pritchard (pritchardsg@cormetech. com) is senior vice president, sales engi- neering for Cormetech Inc.
When it has to work, when it has to last — Nol-Tec’s experts are there for you.
Sorb-N-Ject®
MATS MATS and MACT compliant mitigation of Hg SO2 SO3 HCI HF
With 30 years of industry experience, Nol-Tec thoroughly understands air pollution migitation. We design our dry sorbent injection systems to suit your specific control needs. Our experts look at every variable to guarantee compliant levels for your emissions.
Dependable, continuous sorbent flow, with redundant design as needed
Reliable automated operation and control, for optimal performance and consistent costs
On-site, self-contained testing systems, to ensure the precise results you need
Call 651-780-8600 today to begin an analysis of your pollution mitigation needs.
And we’re we’re there for you throughout t he life of your system. You can rely on Nol-Tec expertise and service.
Nol-Tec Systems — your parnter in handling success
[email protected] Nol-Tec Systems, Inc.
www.nol-tec.com
425 Apollo Drive
Lino Lakes, MN 55014
CIRCLE 23 ON READER SERVICE CARD
|
December 2013 POWER
www.powermag.com
49
WORKFORCE TRAINING
Power Plant Training Simulators Explained Faced with the necessity of doing more with less—and less-experienced—staff, less-experienced—staff, the power business increasingly is turning to simulators for reliable and efficient real-world training. Richard W. Vesel
T
raining simulators are worth their weight in gold to the power industry, as well as to most process industries in general. People tend to learn the fastest and the most thoroughly when hands-on trial and error is part of their training process. Operational errors made while engaged in training simulations are cost-free and provide highreturn lesson events. Conversely, the results of operator errors made during actual plant operations can range from inefficient to catastrophic. Simulators can reduce the time for training an operator from years to months, and achieve it with far better thoroughness and retention. With a built-in ability to review, vary, and repeat operational scenarios until they are cemented in the minds of operators and operators-to-be, no power plant should be without one. Simulators come in many varieties, where complexity and efficacy are exchanged for cost (Figure 1). Simulators distinguish between emulation and virtual simulation. Emulators do not physically contain the same control system elements or HMIs that the actual process controls contain but merely mimic them with software. A virtual simulator contains exactly the same process controls and HMIs that an operator will encounter in the real process control room, and only the physical processes themselves are simulated by computer. The better the physical system process simulation, the more realistic the virtual simulator becomes, until using it is almost indistinguishable from the real plant control room experience. The complexity and accuracy of this physical process simulation is characterized by what is called the “fidelity” of the simulator. Simulator fidelity is usually described as being low, medium, or high (Table 1). The best, most process-realistic simulators are high fidelity, and as one might expect, they are also the most expensive. Cost notwithstanding, many users choose high-fidelity simulators 50
to train operators so that the trainees get as deeply exposed to the plant as possible, without actually touching it.
Simulators as a Critical Training Tool What are some of the benefits to having a training simulator? Obviously, training is faster and more effective, but this can provide benefits across all plant operations. For example, new operators can fill vacancies in the existing operator force more quickly. This helps reduce the impact of workforce turnovers and attrition. When new equipment is installed, a simulator is the fastest method of getting existing operators familiar with new procedures. For new plants, simulators can give operators early hands-on “experience,” especially with turnkey projects. Simulators can also be used to let operators practice standard operations. This means faster and more reliable startups, shutdowns, and runbacks.
Standardization of operating practices through the use of simulators means that operators who are identified as those with “best practices” can train other staff members in their methods. And of course, simulators are ideal for safely training operators to respond to abnormal plant conditions. This means improved operational flexibility and response times to widely varying dispatch signals, a reduction in abnormal operating situations, and a reduction of unplanned outages due to operator errors and unforeseen equipment trips.
Financial Returns from Simulator Investments Low-fidelity Low-fidelity simulators are low six-figure investments, while a medium-fidelity simulator will be in the mid six figures. A full highfidelity simulator will typically be in very low seven-figure seven-figure territory. From date of order to delivery date, the typical simulator project tends to run about three to six months.
1. Many options. A variety of simulator options are available. The best (and most expensive) can exactly duplicate real plant processes and operations. Courtesy: ABB
www.powermag.com
|
POWER December 2013
WORKFORCE TRAINING
Table 1. Benefits and limitations of simulators vs. fidelity type. Courtesy: ABB Low fidelity
Medium fidelity
High fidelity
Best possible process model, most realistic operator experience for startup, shutdown, dynamic operations, runbacks/turndowns, and plant performance tuning
Benefits
Lowest cost, fastest delivery time
Moderate cost, moderate delivery schedule, greater process simulation detail, unit startup and shutdown simulations
Limitations
Process model is static, good for basic training in HMI and controls navigation.
Process model cannot handle Highest investment cost, longest fast process dynamic responses, project execution time runbacks to low levels, or operational tuning for best unit financial performance.
With even the basic benefits discussed above, such as faster startups and reduced outages, simulator projects are amongst the easiest to justify. If a plant has had any significant “operator error” events in its recent history, eliminating these events can bring immediate returns.
■ ■ ■ ■ ■
■
Best Practices for Incorporating Simulators The following are suggested approaches for getting the most value from a simulator investment: Use the simulator to familiarize trainees with plant systems, functions, and interactions, as well as familiarization with HMIs and process data views. Use the simulator as a cross-training tool for members of the plant engineering, technical,and maintenance staffs. Use the simulator as a key element of new operator training:
■ ■ ■ ■ ■
Use the simulator with plant technical staff, or consulting suppliers, to assist with: ■
■
■ ■
■
■
■
■
■
Unit startup, shutdown, and steady state operations Normal responses to small or moderate changes in demand Unit runbacks and turndowns to lowest stable levels of operation Boiler efficiency and safety management under normal conditions Scheduling of routine intermittent operations such as soot-blowing
Use the simulator as the central element for refresher or “continuing education” training for existing experienced operators: ■
■
■ ■
Shift-to-shift transfer of best setup and control strategy practices Shift-to-shift transfer of abnormal situation responses Advanced efficiency improvement topics Retraining due to unit equipment modifications/additions
Focus on abnormal situational control, with accident prevention and remediation:
Large tube leaks Loss of large pump function Loss of fan function Loss of feedwater heater(s) Loss of burner fuel flow (mill plugging, etc.) Boiler pressure control malfunction Loss of automatic O2 control Loss of critical measurements Boiler trip management Fuel variability management Alarm flooding scenarios
■
■
Review of existing control logic and process responses Replays of plant problem scenarios to improve controls and responses New control logic testing and debugging Design and test of one-button startup/shutdown controls Alarm management studies and corrective actions Cross-training between specialists of different disciplines
Experiences on the simulator, when combined with actual physical walkdowns, are the fastest way to introduce a new hire or transferee to the characteristics of a unit. The practices outlined above will keep operations staff at the best readiness to handle abnormal situations when they occur. This is born out by the experiences of simulator users not only in fossil and nuclear power, but in all industries that must control large, complex equipment, right up to airline pilots and astronauts. Investments in training simulators continue to grow, and they continue to provide evergreater possibilities to improve plant safety, reliability, reliability, and profitable operation. ■ Richard W. Vesel is global product — Richard manager for power generation energy efficiency with ABB Power Generation, North America. CIRCLE 24 ON READER SERVICE CARD
|
December 2013 POWER
www.powermag.com
51
OFFSHORE WIND
A Wind Energy Plan That Fits America’s Resources The U.S. lags far behind Europe in offshore wind power production due in part to deepwater challenges. Using floating vertical axis wind turbines and energy storage could be the nation’s best means to resolve technical and investment issues and launch the fledgling sector. Drew Devitt
A
merica is blessed with long coastlines and relatively deep waters. But ironically, this has been a disadvantage to the U.S. offshore wind industry. Compared to more than 1,000 turbines that are already operating in the relatively shallow waters around the British Isles, and the significant offshore wind turbine generating capacity in many other European countries, only one offshore turbine is operational in the U.S. today. This is in no small part because shallow U.S. coastal waters are relatively close to the shoreline, which is problematic because it means offshore installations, limited by technical hurdles, must be closer to people, migratory bird patterns, and within state jurisdictions. As for any new industry, it is a good idea to get a big picture view of the sector’s particular circumstances and objectives. First, it is a given that renewable wind generation should be relatively close to demand, yet not in someone’s backyard. Several technical trends are symbiotically conspiring to avoid “not in my back yard” (NIMBY) issues and dramatically change the offshore wind model developed in Europe. These trends include the development of floating wind turbines as opposed to seafloor-supported designs, the use of deep ocean water near U.S. coastlines as an effective head for energy storage, and the use of direct current (DC) deepwater cables in energy transmission. This article shows how these technologies could work together in the context of America’s natural resources and political landscape.
(NREL) have published papers confirming the huge potential advantages of floating wind turbines, noting in 2010: “The NREL has estimated the offshore wind resource to be greater than the 1000 GW of the continental United States. The wind blows faster and more uniformly at sea than on land. A faster steadier wind means less wear on turbine components and more electricity generated per turbine. The wind increases rapidly with distance from the coast, so excellent wind sites exist within reasonable distances from major urban load centers reducing the onshore concern of long distance power transmission.” To emphasize Butterfield’s point regarding transmission, the best winds within the continental U.S. are class 3 and 4 winds in the Great Plains and Mountain States— but typically 1,500 miles from major load centers. Comparatively, areas just 30 miles offshore from major metropolitan hubs see class 6 winds. This is significant because an estimated 70% of U.S. electricity demand is close to its coastlines and the Great Lakes. It is also important to add that the energy in wind increases as a cube function of its velocity, so wind of 6 meters per second (m/s) has more than double the energy of wind at 4 m/s. Also, wind velocity near the ocean surface is higher than on land, as thermal boundary layers created by the sun heating the land are eliminated farther from shore. About 20 miles out to sea, wind currents aloft sink and reattach to the ocean surface, becoming trade winds. This reduces the need to elevate the turbine into the air and improves its capacity factor.
The Case for Offshore Wind Turbines
Types of Wind Turbines
When used for offshore wind power production, floating structures have the potential to reach a much larger and significantly more energetic wind resource than seafloor-mounted turbines. At the same time, they increase social acceptance because they allow turbines to be installed far away from people. Sandy Butterfield and his colleagues at the National Renewable Energy Laboratory
Wind turbines can have either a horizontal or a vertical axis of rotation. Another important point of differentiation is that wind turbines employ two basic principles to capture energy from moving air: aerodynamic turbines use low-pressure lift (like an airplane wing), while impulse turbines use drag (like a water wheel). The differentiating factor is that the blade tip speed of aerodynamic turbines is a
52
www.powermag.com
multiple of the wind speed, but an impulse turbine will not spin faster than the wind. Aerodynamic turbines can be more efficient than impulse turbines (Figure 1). An anemometer, a device for measuring wind speed, is an example of an impulsetype device with a vertical axis of rotation— though vertical axis wind turbines (VAWTs) may employ aerodynamic or impulse design. Conventional horizontal axis wind turbines (HAWTs) used widely at utility scale are an example of aerodynamic turbines with
1. Turbine efficiency by type.
This chart describes the efficiency of different types of utility-scale wind turbines. The chart’s vertical axis represents the turbine’s efficiency as a percentage of the total energy in the wind. The horizontal axis represents the relationship between wind speed and turbine tip speed. Aerodynamic turbine types have tip speeds of four to seven times the wind speed, and impulse turbines have tip speeds on the order of the wind speed. Aerodynamic turbines are favored because they have roughly twice the efficiency of impulse-type turbines, but impulse turbines have historically been used whenever cost, reliability, or capacity factor is more important than efficiency. Source: Jean Lucmenet
Betz max. efficiency 2-blade HAWT aerodynamic 3-Blade HAWT aerodynamic 2-Blade Darrieus VAWT aerodynamic 2-Blade Dutch HAWT aerodynamic Multiblade American HAWT hybrid Multi-blade Multi-bl ade Savonius VAWT impulse 60 50 ) 40 % ( y c n 30 e i c i f f E 20
10 0
0
1
2
3
4
5
6
|
7
POWER December 2013
OFFSHORE WIND tip speeds today reaching 100 m/s (360 ki2. Time versus wind energy. This chart, showing the distribution of wind speeds with lometers or 225 miles per hour). The old respect to time, plots two years’ worth of wind speed data from a buoy at the mouth of the four-bladed Dutch wind-powered mills and Delaware Bay. Bay. Total hours that the wind blew at a particul ar speed are shown as a bar chart. To To water pumps that used cloth-covered, woodshow the energy that is contributed at each of the wind speeds, the power in the wind (a cubed en-framed blades as well as the iconic Wild function of its velocity) is multiplied by the time that the wind blew at that speed . Notice that the maximum energy was at 11 meters per second but that the wind blew at this speed only 4% West American multiblade wind turbines are of the time. Half of the total energy for the year occurred on the high-speed side of the energy almost impulse type systems when considpeak during 15% of the total hours. Source: American Offshore Energy ered in the context of today’s modern aerodynamic HAWTs. Hours Energy A lot of engineering and technical develop1,200 420 ment has gone into modern HAWTs HAWTs in order to drive their efficiencies to 45% at the high 1,000 350 end. The theoretical maximum efficiency is limited by Betz’s Law to 59%. A wind tur- r 800 280 ) h e bine cannot be 100% efficient, as this would a y W r ( imply that the air exiting the turbine would e 600 210 k p y g s have zero velocity and so would prevent oth- r r e u n o 400 140 er air from flowing through the turbine. E H Efficiency factors can be misleading, 200 70 though, in that they presume a certain wind speed, which is usually not noted. For in0 0 stance, a HAWT may have an efficiency of 1 2 3 4 5 6 7 8 9 10 11 12 12 13 14 15 16 17 18 19 20 21 22 45% for a wind speed of 14 m/s, but it would not even spin—meaning it would have zero well for the sales team when selling a turbine land-based wind turbines are typically claimed efficiency—with a 5 m/s wind. HAWTs are based on its megawatt rating. to be 25% to 35%. Comparatively, gas or steam a logical optimization of the wind turbine What should be considered instead are capacturbine capacity factors approach 100%. To maximize the capacity factors for specifications. The energy in wind is a cubed ity factors. Capacity factors are based on a power function of its velocity, so optimizing wind curve for the particular wind turbine as well as wind energy, the focus of the offshore wind industry should change from the megawatt turbine efficiencies for high wind speed rewind speed data from the proposed site where sults in large megawatt ratings. This works the turbine will be installed. Capacity factors for rating of a turbine to useful load matching,
CIRCLE 25 ON READER SERVICE CARD
|
December 2013 POWER
www.powermag.com
53
OFFSHORE WIND with more interest given to turbines optimized for higher capacity factors in average wind speeds. In the current paradigm, HAWTs have the highest efficiencies in the higher wind speed ranges, and this results in high megawatt ratings for the turbines but low capacity factors, meaning that the turbine will generate its rated capacity only a small fraction of the time. This causes “spiky power,” that is, much of a turbine’s power is made over a relatively short period of time (Figure 2). For this reason, wind turbine electricity must be associated with
storage in order to be considered as a baseload power source. In comparison, VAWTs VAWTs in an impulse configuration have a relatively high efficiency in lower wind speeds because they have higher blade areas as a percentage of swept area. This could be thought of as the “barn door method” of collecting energy from the wind: Although not as efficient at higher wind speeds, impulse type VA VAWTs will make power most of the time the wind is blowing—making them more suitable to power companies and mitigating the need for time shifting or storing wind energy.
CAN control
You You
dust & spillage. © 2 0 ® 1 3 R M e a g i s r t t i e n r E e d n g t r i a n e d e e m r i n a g r k C o o m f M p a a r n t y i n . E F n o g r i a n d e d e r i t i i n o n g a C l o i m n f p o r a m n a y t i i n o n t h v e i s i U t m S a a r n t i n d - o e h n t g e . r c o s e m l e / t r c t a l d o e c m a t a o i r k n s s . .
Modular Skirtboard
Trac-mounted components
Proper belt support
Effective edgesealing system
Start with a good foundation: EVO ® Transfer Point System
SUCCESS STORY Omaha Public Power District
Overall, the biggest dust control improvement has been the rebuilding of the coal transfer points to contain dust.
Omaha, NE
“We used to have lots of dust and spillage. But now that all the transfer points have been rebuilt, it’s a night and day difference.” said Kirk Estee, P.E. P.E. Material Handling Supervisor,, OPPD. Supervisor
Visit bit.ly/175j8Oh or scan the code to read the full story
A Global Company
call 800.544.2947 visit martin-eng.com email
[email protected]
However, utility-scale energy storage would still be beneficial to any electrical grid if it can be done cost effectively.
Ocean Energy Storage Much has been invested in trying to develop energy storage technologies as a way to more evenly distribute renewable power across time. So far, only compressed-air storage and pumped-hydro storage have the capacity to practically “time shift” utility-scale energy, but both require specific geological features that are generally not found close to major load enters. If the electrical generation occurs over deep ocean water, though, energy storage becomes much more convenient. convenient. In another significant advantage for floating wind turbine technology, the pressure of the deep ocean waters under the turbines can be used for utility-scale energy storage. A number of different engineering approaches to this have been explored using air or water. Coloradobased Bright Energy Storage, for instance, has a plan to pump air into huge bags in deep water, while Dr. Alexander Slocum, a mechanical engineering professor at the Massachusetts Institute of Technology, suggests using excess wind power to pump water from hollow concrete spheres (made from fly ash) that are ballasted by their own weight to the seafloor. Doubling as an anchor for floating wind turbines, a 25meter-diameter sphere could store up to 10 MWh of power, depending on depth. Pairing deepwater wind generation with energy storage could make wind energy the most flexible of all energy sources. A 1-MW wind turbine that is able to produce 10 MWh over 24 hours could sell all 10 MWh during the hottest hour of the next day at peak prices. Wind farm operators could even begin bidding in the frequency regulation market, where the price per kilowatt-hour is five to 10 times the price that can be negotiated in power purchase agreements. This would both improve returns for investors and provide an environmental bonus because turbines that now provide frequency regulation, being smaller and more flexible, have fewer pollution controls. It is good for everyone when clean flexible power is worth more.
Addressing Transmission Concerns But to accomplish frequency regulation from the deep ocean, transmission capabilities are obviously required. Several developments have been made here, too. Trans-Elect DevelDevelopment Co. has proposed the Atlantic Wind Connection (AWC), a 6,000-MW transmission backbone running from Virginia to northern New Jersey, some 30 to 50 miles out in the Atlantic Ocean. That $5 billion plan has attracted more than $500 million
CIRCLE 26 ON READER SERVICE CARD 54
www.powermag.com
|
POWER December 2013
OFFSHORE WIND in investments from companies including Google, Good Energies, and Marubeni. Trans-Elect has received a “Determination of No Competitive Interest” from the Bureau of Ocean Energy Management and is proceeding without an associated auction. Plans are in effect to have the first phase—a $1.8 billion, 150-mile-long project from Delaware Bay to Atlantic City—operational by 2016. Notably, Trans-Elect, which was the nation’s first independent transmission company, is betting on high-voltage direct current (HVDC) cables, which it anticipates will have cost and technical advantages over alternating current (AC) transmission. Today, almost all commercially available wind turbines generate asynchronous AC current that is converted to DC, and then the DC is inverted back to three-phase AC AC at 60 Hz. However, a number of capital costs, efficiency losses, cooling systems, power quality problems, and maintenance headaches must be borne with this method. Wind turbines designed to generate DC current may still need a transformer to step up the voltage but would avoid even having to sync with the rest of the grid, making them simpler to implement by reducing the balance of plant—which is especially important at sea. Though technically challenging, obtaining permits for undersea cables may be easier than for land-based lines. Also, transmission cables could be brought ashore to existing grid connections at retired power plants, many of which are located on riverbanks or at coastlines near major load centers. These could serve as perfect locations for injection of high-current frequency regulation and reactive power services to keep the grid running efficiently.
glass components with relatively low capital 3. Inspired design. One example of a equipment needs are all that would be refloating vertical axis wind turbine (VAWT) is quired, so a supply chain based on these com- a design based on the rigid mainsail used on ponents would scale up much more quickly. quickly. America’s Cup boat s. The 60-ton VAWT design Old shipbuilding sites and cargo transfer ports adds three more sail plans and a masthead could make for good candidates for wind tur- ring for 1,800 square meters of projected bine manufacturing sites. The labor skill sets area. The bearings and generator are located could also be filled quickly and practically near sea level for easy on-site service and to provide a stable low center of gravity. Cour- deployed in many more coastal locations. Floating VAWTs could also eliminate the tesy: American Offshore Energy need for purpose-built ships that are required to assemble seafloor-mounted HAWTs. This is important because, having never installed a foundation-based offshore wind turbine, the U.S. lacks a fleet of the jack-up ships that are necessary. And, unlike in Europe, the U.S. cannot hire foreign-flagged ships to work in U.S. territorial waters because it would violate the Jones Act, a federal statute that regulates maritime commerce in U.S. waters. The U.S. already has a ready fleet of ships that are capable of towing floating turbines out to mooring fields, though. sider all of the issues and constraints involved, By eliminating a seafloor foundation, the not just the turbine’s maximum efficiency. cost structure of supply-chain issues and the Other structures are possible. Lightweight costs to assemble and service turbines at sea structures can be achieved by using tension can also be dramatically improved. As noted and compression design principles rather previously, previously, the further away from NIMBY than the bending of a cantilevered structure. issues and state jurisdictions, the better the Examples of such structures would include wind resource becomes, but the ability to tow bicycle wheels, suspension bridges, and saila turbine back to the factory in a single day boat masts (Figure 3). mitigates risk, reducing both insurance and A 200-foot tall VAWT installed 30 miles banking costs for projects. Ocean transporta- offshore would not be visible or audible from tion and sighting combined with low turbine land, dramatically reducing legal challenges speed could enable scalability to a huge size. that can delay and increase costs of wind projects. Having Having a high degree degree of solidity and A Better Choice than HAWTs a low rotation speed avoids harm to birds and However, most “floater” programs in develop- provides excellent horizontal radar reflecment in the U.S. today are designed to employ tion for maritime visibility with little vertical HAWTs, which have a lot of developmental reflections. Additionally, the VAWT has no Floating VAWTs Fit the Bill inertia based on current onshore designs, their gearbox or oil reservoir, and all the compoOnly one offshore turbine is operational in the supply chains, and government funding pro- nents on the turbine are waterproof and rustU.S., even though the country has the world’s grams. U.S. research consortium DeepCwind, proof. In the event of an occasional hurricane second-highest onshore wind turbine capacity which is led by the University of Maine’s or rogue storm, the turbines could be easily (after China). The UK has more than one-half Habib Dagher, this year launched the first and reefed or sunk by remote control, allowing of the 3 GW total worldwide installed offshore only offshore wind turbine off the coast of them to ride out the storm safely beneath the wind generation, and it has ambitious plans Maine—a concrete-composite floating plat- ocean surface. When the storm has passed for even more offshore wind farms. However, form HAWT prototype that is one-eighth the turbines may be again raised via remote conas Bloomberg New Energy Finance notes, be- size of a “VolturnUS” design envisioned for trol and recommissioned with little effort. Floating VA VAWTs enable a host of o f advantages cause the UK has a limited supply chain for commercial installation. offshore wind turbines, about 80% of what the One problem is that it is difficult to make that dramatically improve the return on investcountry spends on wind technology still goes conventional HAWTs float. They are cantile- ment, the reliability of the energy stream, and to foreign contractors or turbine suppliers. Jim vered structures, reaching high off their base the ability to usefully site the turbine. Because d ifferent supLanard, president of the U.S. Offshore Wind support with large masses and forces acting at VAWTs would have a completely different Development Coalition, is quick to point out the top. It is a fundamentally unstable struc- ply chain chain than than convent conventiona ionall HAWT HAWTs, s, their their pothat if the U.S. is to gain and keep legislative ture in the context of floatation, but HAWTs tential to generate jobs may be increased. And, support for the offshore wind industry, it will are the mainstay of the wind energy industry. if paired with HVDC power transmission and have to generate domestic jobs. Almost all utility-scale wind turbines employ deep ocean energy storage, floating VAWTs Increased use of floating VAWTs could three blades connected to a horizontal spindle, could give the country’s new offshore sector do just that. First, the capital-intensive sup- which is mounted on top of a pole. There is no fair winds in which to hoist its sails. ■ ply chain needed to manufacture large roller debate that this design can be the most effi— Drew is founder of American Off- Drew Devitt is shore Energy and a former president of the bearings, gears, forgings, forgings, and castings would cient at capturing energy from wind, but a big not be required. Steel fabrications and fiber- picture, picture, smart smart grid, grid, objective objective look should should con- American Society of Precision Engineering.
|
December 2013 POWER
www.powermag.com
55
NUCLEAR
When It Comes to Nuclea Nuclearr Plants Plants,, Is Small Beautiful? Though small, modular reactors have their detractors, on balance, the “little guys” appear to have an edge over the heavy-weights in the contest for the next generation of U.S. nuclear power. Kennedy Maize
I
n 1973, an obscure economist from Britain’s National Coal Board, which then owned and operated all the coal mines in the country, published a book that posited— as the title proclaimed—that Small Is Beautiful. It was an antidote to the conventional wisdom that “bigger is better.” E.F. Schumacher’s book became an international bestseller and an iconic text for the burgeoning worldwide environmental movement. Today, the nuclear power industry, which long embraced the “bigger is better” paradigm, is moving in Schumacher’s direction. The industry is looking for alternatives to the long-held wisdom about the economic benefits that come from scaling up atomic technology. Now, big money is actively pursuing smaller reactor designs that bite off considerably less than the machines that came into service in the 1970s and 1980s. The rubric for the new nukes is “SMR,” which stands for “small, modular reactors.” reactors.” Let’s examine the terms in more detail. “Small” means reactors that are less than a third the size of what are conventional, utility-scale nuclear plants. Modern, state-ofthe-art nuclear units basically start at 1,000 MW and move upward from there. Today’s plants are designed to take advantage of what economists describe as “economies of scale,” meaning that the efficiencies and incremental cost savings gained by getting bigger outweigh the greater cost of a larger unit. But is that doctrine always valid? Maybe not, according the latest economic analyses that support the concept of SMRs. It may be the case that the hefty capital costs of new, big nuclear plants, the long lead times to build them, and the fact that each plant is unique and entirely built on site, may overwhelm the economics of getting bigger. Smaller may be better for new nuclear power units. The decision by a utility to build a new conventional nuclear power plant, which costs in the range of $7,000/MW per unit, is a gut-wrenching, often bet-the-company, strategic move. It’s a long-term wager of 56
at least $7 billion in capital for 1,000 MW of baseload, nondispatchable, capacity in a market where power prices are far more than ever a matter of short-term supply and demand.
■
■ ■
■
Passive decay heat removal by natural circulation Smaller source term inventory inventory Simplified design eliminates/mitigates several postulated accidents Below-grade reactor siting
Bite-Sized Busting that bet into smaller chunks—say 300 MW at a time—makes some economic sense, many in the industry now reckon, even if the overall capital cost per unit of power is greater than the big unit. That’s one of the doorways to conceptualizing small modular generating units. There are other potential benefits. Modular units imply that they can be built in multiples, following the growth in demand as it develops (or doesn’t). The smaller size of the units also implies that the nuclear units can be factory-fabricated and shipped to the reactor site, a revolutionary, and possibly big cost-saving, difference from the conventional “stick-built” approach that characterized the first generation of nuclear power plants in the U.S. At a presentation at the Bipartisan Policy Center in Washington last year, Pete Lyons, the Department of Energy (DOE) assistant energy secretary for nuclear energy and a nonpartisan veteran of the nuclear policy wars in Washington, outlined the economic benefits the agency sees that could flow from smaller, more flexible, factory-built reactors. Among them, said Lyons, are: ■ ■ ■
■
Reduced financial risk Flexibility to add units Right size for replacement of old coal plants Domestic forgings and manufacturing
Lyons also laid out what the energy agency believes are safety benefits from a new, smaller, generation of nuclear plants, as his talk occurred close to the first anniversary of the catastrophe at Japan’s Fukushima multiunit nuclear station. These benefits, Lyons said, include: www.powermag.com
For nearly four years, the nuclear industry and the federal government, through the DOE, have been pushing the concept of the smaller, modular nuclear reactors. Congress has given the DOE some $452 million to dedicate to the development of SMRs. The agency is moving ahead to commit that money. It’s important to note that the government money isn’t just free candy. It must be matched, dollar-for-dollar, dollar-for-dollar, by the privatesector recipient.
Policy Priority Lyons told a House appropriations subcommittee in March 2013 that the Obama administration’s “Nuclear Energy Research and Development Roadmap” places a “high priority” on accelerating “the timelines for the commercialization and deployment of small modular reactor (SMR) technologies through the SMR Licensing Technical Support program. The program will focus on first-of-a-kind engineering support for design certification and licensing activities for SMR designs through cost-shared arrangements with industry partners (industry contributions are a minimum of 50% of the cost) to promote accelerated commercialization of the nascent technology. If industry chooses to widely deploy these technologies in the U.S., they could help meet the nation’s economic, energy security and climate change goals.” goals.” After soliciting bids in 2010 for proposals for cooperative agreements, which the DOE said at the time likely would result in two winners in the SMR sweepstakes, the agency in November 2012 picked only one, the Babcock & Wilcox mPower design, a 180-MW light water reactor proposal from a company that has vast experience in nuclear power,
|
POWER December 2013
NUCLEAR particularly with Navy nuclear propulsion systems (its experience with large civilian plants, however, has had some bumps along the road, including the Three Mile Island plant in Pennsylvania, the Davis-Besse plant in Ohio, and the Crystal River plant in Florida). The plan is for connection to the Tennessee Valley Authority (TVA) power system around 2022. B&W’s project involves a muscular team that also includes the engineering giant Bechtel and, providing a site and its own extensive nuclear experience, the TVA. The TVA wants to locate two of the 180-MW mPower units at its Clinch River site, where the agency and the federal government planned, spent billions, and never succeeded in building a fast breeder reactor in the 1970s and 1980s. Breeders were then going to be the next big thing in nuclear power technology. technology. Having disappointed the nuclear industry by picking only one winner in the first round of its competition for SMR cost sharing, the DOE last March announced round two, with applications due in July, for projects aimed at a 2025 time frame. These projects included: ■
■
■
■
A consortium led by Westinghouse Electric Co., a Toshiba subsidiary, working with utility Ameren Missouri (legally known as Union Electric), owner and operator of the Callaway nuclear plant. Their plan calls for development of a 225MW version of the AP1000, an advanced 1,000-MW pressurized water reactor that has Nuclear Regulatory Commission (NRC) design approval. (Any SMR project will have to get the NRC’s sign-off on the safety of the design before it can be built and operated.) NuScale, a 45-MW, below-ground lightwater reactor developed by a group of Oregon State University (OSU) scientists working with the DOE’s Idaho Nuclear Engineering Laboratory. The company is based in Corvalis, Ore., home of OSU. NuScale’s majority owner is engineering and construction giant Fluor Corp. The design is a pressurized water reactor that the developers claim can shut down in an emergency without need for off-site power. Holtec International, a New Jersey firm, which has proposed a 160-MW underground pressurized water reactor, with backing from New Jersey utility PSEG, which operates two nuclear generating plants in the Garden State, and URS Corp., a major nuclear engineering consulting firm. General Atomics (GA), a San Diego firm that has a long history of innovative reactor technologies, which has bid a heliumcooled, graphite-moderated design into
|
December 2013 POWER
LinkedIn: Where the POWER Community Connects As a follow-up to the October editorial “When Policy and Construction Timelines Diverge,” we asked members of the LinkedIn POWER magazine group, “Have you ever been involved in a project built to meet a particular policy—only to have the policy change by the time the project went online?” Here are excerpts from a few responses:
•
•
•
Yes, and it wasted a great deal of effort. The sunk costs of everyone involved would have run well into six figures, without counting all of the engineer costs of the plant itself (I plan the move of them, not design them). (Edward) I suppose most of us old ol d timers had such an experience. . . . Change is almost constant in the marketplace and the regulatory environment. Given that major power projects take many years for permitting and construction; and with economics a moving target, you almost never start up and serve the load as planned. . . . This situation i s certainly a management challenge. (John) Yes I worked on a Waste-to-Energy facility in i n NJ—the new Governor cancelled the facility even though the foundations had been poured—when politics over-ride sound engineering and financial considerations the public suffers. See also Shoreham Nuclear Power Plant in Long Island cancelled after all permits were obtained. (Richard)
The POWER magazine LinkedIn group is also a great place to ask for advice from other members (via the Discussions tab).
the DOE SMR competition. GA, which designed and marketed the Triga research reactor, the most successful nuclear machine in the world, is proposing a version of its high-temperature gas reactor for the DOE program. The GA project proposes a 265MW helium-cooled, graphite-moderated reactor that is surely a challenge to conventional light-water designs. Industry experts expect the DOE to pick a second-round winner soon.
Cautionary Notes But the SMR technology has well-qualified www.powermag.com
critics. Edwin Lyman of the Union of Concerned Scientists (UCS), long a technically sophisticated critic of nuclear power, in September issued a report, “Small Isn’t Always Beautiful,” Beautiful,” arguing that SMR technology is a dead end. The UCS report says that the safety claims of SMR advocates are overstated. The SMR units, says the analysis, “feature smaller, less robust containment system than current reactors.” Undergrounding Undergrounding the units “is a double-edged sword—it reduces risk in some situations (such as earthquake) and increases it in others (such as flooding).” flooding).” While each smaller unit may be less dangerous than a larger unit, says the UCS paper, 57
NUCLEAR this “is misleading, because small reactors generate less power than large ones, and therefore more of them are required to meet the same energy needs. Multiple SMRs may actually present a higher risk than a single large reactor, especially if plant owners try to cut costs by reducing support staff or safety equipment per reactor.” Nuclear power plant development started out small in the U.S., for understandable reasons. The thrust of U.S. efforts on use of nuclear energy in the first two decades after the atomic destruction of Hiroshima and Nagasaki was on submarine propulsion, driven by the brilliant and autocratic engineer Admiral Hyman Rickover, who occupied dual positions in the Navy and at, first, the Atomic Energy Commission (AEC) and, later, at the DOE. The first U.S. commercial power reactor—Shippingport, on the Duquesne Light system outside of Pittsburgh, Pa.—was a 60-MW unit that was basically a Navy pressurized water reactor built on the ground and tied into the utility grid. It went into service in December 1957. The AEC reactor program cautiously followed with a series
of early light-water reactors of fairly low power: Dresden in Illinois, a boiling-water reactor at 180 MW (1959); Indian Point 1 in New York, with 163 MW of capacity from nuclear and 112 MW from an oil-fired preheater (1962); and Humboldt Bay in California at 63 MW (1963). Consolidated Edison, which owned and operated the Indian Point reactor, in the early 1960s proposed a 1,000-MW plant in Queens, in the heart of New York City at its existing Ravenswood Ravenswood oil-fired station. Con Ed’s plans for the unit soon collapsed under the weight of local opposition and a skeptical AEC. The nuclear big iron arrived with the “second-generation” reactors of the late 1960s and early 1970s, beginning with New Jersey’s sey’s Oyster Creek, a 636-MW GE boiler that went into service in 1969, and about which the economics remain murky today, although it appears that GE, which built the plant on a turnkey contract, took a large financial bath. But the presumed economies of scale soon propelled reactor vendors and utility buyers into larger and large units, until 1-GW machines became the norm. But there were concerns even during the
USA US A ’ ’s s Largest Largest
Kennedy Maize is — Kennedy is a POWER contributing editor. editor.
Save $500
2014
Register by Dec. 31st Cost $895 ($1,395 Onsite)
Energy, Utility & Environment Conference Feb 3 - 5 | Phoenix Convention Center, Phoenix, AZ
nuclear boom of the 1970s that the scale-up had been a mistake. The second generation of nuclear designs—the 1,000-MW big boys of GE, Westinghouse, Combustion Engineering, and B&W—too often were lousy performers by many measures. They had poor operating records, with too many unplanned outages, poor capacity factors, and multitudes of regulatory infractions. In the 1980s, not long after the March 1979 Three Mile Island meltdown in Pennsylvania, a top nonpolitical official at the NRC suggested that perhaps it was a mistake to rapidly scale up reactors beyond about 300 MW. At the time, those musings struck the nuclear industry as unexpected treachery. Today, on the other hand, the industry is embracing the idea of smaller units with greater safety margins, fewer engineered safety features, often with underground siting, and with economic benefits from smaller scale. Will this latest approach to resurrect the U.S. nuclear industry work? That question remains unanswered. ■
500 SPEAKERS A. Air Policy & Regulations B. CEMS & Modeling C. Hg Hg Multi-Pollutant Multi-Pollutant Control D. Energ Energy y Polic Policy y & Secu Securit rity y E. Renewable Energy F. Operations & Mgmt G. GHG, Carbon & CCS H. Alternate Fuels I. Sustainability & Water J. Energy Efficiency
3rd Annual EUEC Golf Tourn Tournament ament | Feb 2nd, 2014
DIRECTORS
U.S. DEPARTMENT OF
ENERGY
Mitchell Baer
John Kinsman
Mike Miller
Prabhu Dayal
www.euec.com
Contact EUEC | P.O. Box 66076, Tucson, AZ 85728 | (p) 520.615.3535 |
[email protected]
58
www.powermag.com
|
POWER December 2013
EVENTS
Coal in Favor as Malaysia Increases Its Installed Capacity Attendees at the third annual Asian Sub-Bituminous Coal Users’ Group learned de tails about Southeast Asia’s Asia’s first 1-GW supercritical coal-fired power plant and heard of plans to expand coal’s use further across the region. By David Wagman
M
alaysia’s largest power provider considers coal to be an important fuel for future growth as the Southeast Asian nation of nearly 30 million people works to diversify its generation portfolio away from natural gas even as it meets growing demand for electricity. electricity. Attendees at the third annual Asian SubBituminous Coal Users’ Group (ASBCUG) in George Town, Penang, Malaysia (Figure 1) in October saw evidence of that commitment to coal during a visit to the Stesen Janakuasa Sultan Azlan Shah power plant, a 3 x 700-MW coal-fired power plant equipped with Alstom turbines that entered service in 2003. The power plant is sited on reclaimed land next to the Straits of Malacca on the country’s west coast. Work is underway at an adjacent location on a 1,000-MW supercritical coal-fired unit—also using Alstom technology—that is slated to enter service in March 2015. Conference attendees also heard Tenaga Nasional Bhd (TNB) Vice President of Generation Zainuddin Ibrahim say that the company will build two more 1,000-MW
coal-fired power plants by 2017. Zainuddin said Malaysia’s electricity demand is growing at a 2.9% annual rate and that TNB currently generates 35% to 40% of its electricity from coal, 50% from natural gas, and the remainder from renewable energy, including hydroelectricity. Asia as a whole obtains around two-thirds of its electricity from coal-fired power plants, he said. “Our aim is to give the most cost-efficient supply of electricity,” Zainuddin told reporters on the sidelines of the annual conference, which is organized by TradeFair Group, publisher of POWER. He said coal ranks as one of Malaysia’s most important energy sources and that more than 80% of the fuel is imported from Indonesia, South Africa, and Australia. TNB is the country’s largest utility and is one of the ASBCUG’s founding utilities. Other founders include CLP Power Hong Kong, the Electricity Generating Public Co. Ltd. (EGCO) of Thailand, Hong Kong Electric, Taiwan Power, Korea Southeast Power (KOSEP), and the U.S.-based Powder River Basin Coal Users’ Group.
1. UNESCO World Heritage Site. The third annual Asian Subbituminous Coal Users’ Group met in George Town, Penang, Malaysia. The 2014 conference will take place in Bangkok, Thailand. Source: David Wagman
|
December 2013 POWER
www.powermag.com
Coal Plant Visit Two motor coaches took ASBCUG attendees to TNB’s 2,100-MW Stesen Janakuasa Sultan Azlan Shah power plant (Figure 2), a three-hour drive from the UNESCO World Heritage city of George Town. The power plant’s three subcritical units entered service between April and September 2003 and operate with main steam and reheat steam temperatures of 540C. The boilers are two-pass, drum-type boilers with seven elevations of tangential firing coal burners and four elevations of distillate oil burners. At 100% load the station burns 320 tons of coal per hour. The station’s coal yard can accommodate a 30-day supply of coal. Since the station entered service, operators have burned 43 different brands of bituminous and subbituminous coal. That represents a total burn of around 48.4 million tons of subbituminous coal and 9.1 million tons of bituminous coal. Azizul Othman, operations manager, said the plant meets World Bank standards for emissions. It achieves those standards by using flue gas desulfurization and electrostatic precipitators. Low-NO X burners as well as low-sulfur subbituminous coal also help achieve emission goals, which are 50 mg/Nm3 for particulates, 750 mg/Nm 3 for sulfur dioxide, and 650 mg/Nm 3 for nitrogen oxide. The plant does no on-site coal blending. Instead, ships’ holds are unloaded at an offshore jetty and the coal is conveyed to the plant’s coal yard. The plant’s boilers then burn one shipload of coal at a time. Nearby, work is underway on what is expected to be Southeast Asia’s first supercritical coal-fired boiler at the 1,000-MW Manjung 4 unit. Work on the project began in March 2011, and the facility is expected to begin producing electricity for Malaysia’s national grid in early 2015, said Rosli Mohammad Appandi, who heads TNB’s boiler, coal, and ash operations. The unit is expected to be anywhere from 37% to 41% efficient and achieve a heat rate ranging from 9,200 59
EVENTS
2. Emission standards. Azizul Othman, operations manager at the 2,100-MW coalfired Stesen Janakuasa Sultan Azlan Shah power plant in Malaysia, said the plant achieves World Bank emission standards by using flue gas desulfurization and electrostatic precipitators. Source: David Wagman
Not surprisingly, the unit runs best at baseload, and Appandi said any request to reduce the plant’s output could negatively impact its overall efficiency. efficiency. A second challenge involves preparing contingency plans should the unit trip offline.
Mercury Strategies
Btu/kWh to 8,300 Btu/kWh. The 80-metertall two-pass boiler will be equipped with a pulverizer and dynamic classifier. Fabric filters will be installed to handle particulate control instead of electrostatic precipitators. Appandi said the unit’s personnel are currently in training using both simulators and on-site training at an overseas power plant.
As required by the project lender, TNB has also hired a technical service advisor to assist with power plant operations for its first two years of service. Coordinating with Malaysia’s national load dispatch center is likely to be complex, he said, since this will be the first time that 1 GW of capacity will come from a single unit.
Mercury emissions also were a topic of discussion during the two-day conference. The Minamata Convention on Mercury, named after a Japanese city where industrial emissions of mercury caused a poisoning disease that affected thousands of people, was signed by multiple nations in early October. It aims to prevent health damage and environmental pollution. The convention was adopted at an international conference organized by the United Nations (UN) Environment Program and drew delegates from 140 nations. The pact will take effect 90 days after it is ratified by at least 50 nations and maps out measures to curb health and environmental damage caused by mercury. Lesley Sloss, principal environmental consultant for the International Energy Agency’s Clean Coal Center, told ASBCUG attendees that the UN Environmental Program had named mercury as the greatest danger globally,
Enhanced PDF version now available
The 2013 UDI Who’s Who Directory covers more than 4,200 U.S. and Canadian generating plants. The directory provides: NEW FOR 2013
UDI WHO’S WHO AT ELECTRIC POWER PLANTS For more detailed information and a list of all available data, visit us online at UDIDATA.COM or contact the UDI Editorial team at
[email protected].
60
www.powermag.com
|
POWER December 2013
EVENTS and that perhaps 25% of mercury releases to the environment may come from power plants. She said Asia is a primary focus for mercury reductions given the amount of coal burned for power production across the region. She said that although the United States was among the first to initiate mercury controls, Canada was the first to adopt emission limits in 2010. Ontario complied in part by closing all of its coal-fired power plants, she said. (For more on Ontario’s coal phaseout, see “Ontario Goes Coal-Free in a Decade” in the May issue of POWER.) The U.S. emission standards are particularly stringent and require mercury reductions of between 90% and 95%, she said. The standard was set based on emissions from the top 12 performing coal-fired plants, and compliance may be achieved through approaches that include both wet and dry flue gas desulfurization, dry sorbent injection, selective catalytic reduction (SCR), activated carbon injection, and baghouse and fabric filters. (See “Optimized SCR Catalysts Maximize Mercury Removal Co-Benefits” in this issue.) Sloss said that many U.S. power generators have found compliance to require a “significant investment,” investment,” but that compliance with the Minamata Convention standards may be a less-expensive undertaking. Relatively simple steps such as fuel switching, operating adjustments, and coal washing may be effective mitigation tools. Sloss said that a 5% to 10% blend of bituminous with subbituminous coal could add sufficient amounts of chlorine and potassium to enhance mercury’s conversion conversion to an oxidized state, which may be captured at rates of up to 90%.
Other Regional Coal-Burning Concerns Attendees also heard Rod Hatt, president of Coal Combustion Inc., discuss challenges operators face due to variations in coal quality. He said that because coal originates from fossilized swamps, wide variability in coal quality should be expected, even from a single seam in a mine. What’s more, he said sampling techniques and standards have not evolved much over the decade. This means that broad variations in coal quality may exist but remain unidentified. As one example, he said that coal volatility refers to the amount of smoke a particular coal produces, a gauge first identified in the mid-1800s by naval commanders and used as a means to measure how visible their warships might be under full steam. “We’re using 1880s technology in 2013,” he said. Doug Hart, firing systems manager at Alstom Power, extended the discussion about
|
December 2013 POWER
coal to note that low-rank coals tend to burn easier, but they also may spontaneously combust on the coal pile. He said subbituminous coal produces lower NO X and SO2 emissions, but at the expense of a lower heat value and higher moisture content. Hatt said that lower NOX can detune a boiler and increase the amount of slagging. Combustion efficiency also may be affected, he said. Hart pointed to a variety of systems that may need to be modified or upgraded by a power plant that burns subbituminous coal.
Those systems include mills, high-velocity coal piping, burners, the furnace, air heaters, and induction fans. The 2014 Asian Sub-bituminous Coal Users’ Group conference will be held in Bangkok, Thailand. Visit www.asiansbcusers.com www.asiansbcusers.com for details. ■
David Wagman is — David is content director for the ELECTRIC POWER Conference, which takes place April 1–3, 2014, in New Orleans. Visit www.electricpowerexpo. www.electricpowerexpo. com for details.
Content Licensing for Every Eve ry Mark Marketing eting Strat Strategy egy Marketing solutions fit for: Outdoor
Direct Mail
Print Advertising
Tradeshow/ POP POP Displays
Social Media
Radio & Television
Logo Licensing
| Reprints
|
Eprints
|
Plaques
Leverage branded content from POWER magazine to create a more powerful and sophisticated statement about your product, ser vice, or company in your next marketing campaign. Contact Wright’s Media to find out how we can custom customize ize your your acknowledgements and recognitions to enhance your company’s marketing marketing strategies.
For more information, call Wright’s Wright’s Media at 877.652.5295 or visit our website at www.wrightsmedia.com
www.powermag.com
61
NEW PRODUCTS
TO POWER YOUR YOUR BUSINESS BUSIN ESS
Heat Recovery Economizer Rising energy costs necessitate new ideas and techniques for heat recovery—such as the Hitec Economizer from GEA Heat Exchangers. It is designed for equipping or retrofitting retrofitting gas turbines and boilers, as well as a wide range of industrial processes where heat recovery can be achieved. A special feature of the Hitec Economizer is the corrosionand temperature-resistant Polual shield on the finned tubes of the heat exchangers. These finned tubes can be manufactured from inexpensive, light metal (aluminum) but can be employed for temperatures up to 200C (392F). Until now, finned tubes made of considerably more expensive stainless steel were commonly used for such temperatures. In addition, stainless steel has lower heat conductivity than does light metal, which reduces operational efficiency. (www.gea-heatexchangers.com)
Eddy Current Testing Instruments Nondestructive testing technology company UniWest has announced the launch of the EddyView family of three new portable eddy current testing instruments. The line of new instruments, Prime, Pro, and Premium, is designed to match the technical functionality and price of eddy current instruments from the most basic to the most sophisticated. The product line was developed in response to market demand for a wider selection of application-specific features in portable portabl e eddy current testing instruments. All three of the new new instruments are built on the same high-signal to lownoise technology platform, and these instruments are readily available. (www.uniwest.com)
Bearing Fault Detector Vibration Sensor IMI Sensors has launched the Bearing Fault Detector PLUS, which is a new sensor designed to monitor rolling element bearings and provide a sensitive 4–20 mA signal to plant monitoring and control systems for early alarming of faults. The new model 649A03 contains an accelerometer and transmitter in a single housing with multiple specialized outputs. When used with a control system, these outputs provide an early warning of bearing defects such as cracked races, brinelling, looseness, and spalling. Ideal for applications requiring continuous monitoring, the 649A03 is specifically designed for sensitivity to high-frequency vibrations in rolling element bearings, which indicate the early stages of wear and damage. (www.imi-sensors.com)
Inclusion in New Products does not imply imply endorsement by POWER magazine. magazine. 62
www.powermag.com
|
POWER December 2013
2014 BUYERS’ GUIDE 2014 The POWER Buyers’ Buyers’ Guide consists of a Company Directory (below), a Product Directory (p. 102), and a Service Directory (p. 117). In the Product and Service Directories, categories also have subcategories. The Company Directory lists manufacturers’ and service providers’ complete contact information.
HOW TO USE THIS GUIDE Suppose you want to contact one or more manufacturers of circuit breaker test equipment. Turn to the Product Directory page that lists test equipment. There you’ll find subcategories listed, including one for circuit breakers (30).
2G - CENERGY Power Systems Technologies, Technologies, Inc., 151 College Dr., #15, Orange Park, FL 32065 Phone: 904-579-3217 Fax: 904-406-8727 Email:
[email protected] [email protected] www.2g-cenergy.com 360training.com and LKItraining. com, 13801 N Mopac Blvd., St e. 100, Austin, TX 78731 Phone: 888-318-3552 Email: kirk.
[email protected] www.360training.com/corporatesolutions/power 3Degrees, 38 Keyes Ave., Ste. 300, San Francisco, CA 94129 Phone: 415-449-0500 Fax: 415-680-1561 Email:
[email protected] www.3degreesinc.com
4-STAR Hose & Supply, 10704 Composite Dr., Dallas, TX 75220 Phone: 214-351-6085 Email:
[email protected] www.4starhose.com
A A.J. Weller Corp., P.O. Box 17566, Shreveport, LA 71138 Phone: 318-925-1010 Fax: 318-925-8818 Email:
[email protected] [email protected] www.ajweller.com Aalborg CSP A/S, Hjulmagervej 55, Aalborg, 9000 Denmark Phone: +45 88 16 88 36 Email:
[email protected] www.AalborgCSP.com
C O M P A N Y D I R E C T O R Y
From the companies listed below the test equipment subcategories, select those those with (30) after their names. names. Then consult the Company Directory for their contact information. Listings in boldface type indicate companies that are advertisers in this issue. Their ads appear on the pages noted.
SEARCH ONLINE, TOO Visit www.powermag.com and click on the Buyers’ Guide button to search by company or keyword in the online Buyers’ Guide. POWER Buyers’
AB Technology Group, 431 State St., Box 1491, Ogdensburg, NY 13669 Phone: 610-906-3549 Email:
[email protected] www.firesleeveandtape.com
ABB, Inc., 29801 Euclid Ave., Wickliffe, OH 44092-1832 Phone: 440-585-6724 Fax: 440-585-7944 Email: francisco.m.tacoa@ us.abb.com www.abb.com
ABB Switzerland Ltd., Excitation Systems Austrasse, Turgi, 5300 Switzerland Phone: +41 58 589 24 86 Fax: +41 58 589 23 33 Email:
[email protected] www.abb.com/unitrol
ABC - Diesel, Wiedauwkaai 44, Gent, 9000 Belgium Phone: 329-267-0033 Fax: 329-267-0067 Email:
[email protected] www.abcdiesel.be
ABB Transformer Transformer Remanufacturing and Engineering Services, 4350 Semple Ave., St. Louis, MO 63120 Phone: 314-679-4722 Email:
[email protected] [email protected] www.abb.com
Abengoa, 16401 Swingley Ridge Rd., Ste. 700, Chesterfield, MO 63017 Phone: 636-519-2300 Fax: 636-539-4021 Email:
[email protected] www.abengoa.com
IMPORTANT INFORMATION FOR VENDORS This print directory includes companies that updated their information in our online Buyers’ Guide within the past year (through early November). To ensure current information listings at ELECTRIC POWER, visit www.powermag.com and click on Buyers’ Guide to update your listing by March 2013. The deadline for updates that will appear in next year’s print Buyers’ Guide will be October 1, 2014. To edit or update a listing, click on the Buyers’ Guide button on the powermag.com site any time before then.
|
December 2013 POWER
www.powermag.com
63
Y R O T C E R I D Y N A P M O C
Abresist Kalenborn Corporation, 5541 North State Road 13, Urbana, IN 46990 Phone: 800-348-0717 Fax: 219-774-8188 Email:
[email protected] [email protected] www.abresist.com AcousticEye, 12 Greenway Plaza, Ste. 1100, Houston, TX 77046 Phone: 888-874-4779 Email:
[email protected] [email protected] www.acousticeye.com Acromag, Inc., 30765 S Wixom Rd., Wixom, MI 48393 Phone: 248-295-0880 Fax: 248-624-9234 Email:
[email protected] [email protected] www.acromag.com Active3D, Inc., 2125 Davis Blvd., Fort Myers, FL 33905 Phone: 313-608-8822 Fax: 435-608-8825 Email:
[email protected] [email protected] www.active3dinc.com ADA Carbon Solutions, 1460 W Canal Ct., Ste. 100, Littleton, CO 80120 Phone: 303-962-1989 Email:
[email protected]@adacs.com www.ada-cs.com ADA Environmental Solutions, 9135 S Ridgeline Blvd., Ste. 200, Highlands Ranch, CO 80129 Phone: 303-734-1727 Fax: 303-734-0330 Email:
[email protected] [email protected] www.adaes.com Advance Products & Systems, P.O. Box 60399, Lafayette, LA 70596 Phone: 337-233-6116 Fax: 337-232-3860 Email:
[email protected] [email protected] www.apsonline.com Advanced Acoustic Technologies, LLC, 3022 Shepperd Rd., Monkton, MD 21111 Phone: 410-472-3000 Email:
[email protected] [email protected] www.soniccleaning.com Advanced CEM Solutions, 30 Monroe Drive, Pelham, AL 35124 Phone: 800-429-8445 www.advancedcems.com
64
Advanced Combustion Technology, Inc., 8525 Freeland St., Houston, TX 77061 Phone: 713-910-8800 Fax: 713-910-8889 Email:
[email protected] www.act-texas.com Advanced Detection Systems, LLC, 1440 East 357th St., Eastlake, OH 44095 Phone: 440-951-6687 Fax: 440-951-6641 Email:
[email protected] [email protected] www.spectruminfrared.com Advanced Filtration Concepts, 7111 Telegraph Rd., Los Angeles, CA 90640 Phone: 323-832-8316, x12 Fax: 323-832-8318 Email:
[email protected] [email protected] www.ADVfiltration.com Advanced Flexible Systems, Inc., P.O. Box 14156, Charleston, SC 29422-4156 Phone: 843-795-6800 Fax: 843-795-6889 Email:
[email protected] [email protected] www.afsjoints.com Advanced Industrial Systems, Inc., P.O. Box 373, 1550 Confederation Line, Sarnia, ON N7T 7J2 Canada Phone: 877-902-8822 Fax: 519-336-0049 Email:
[email protected] [email protected] www.theaisteam.com Advanced Inspection Technologies, Inc., 7777 N Wickham Rd., #12-557, Melbourne, FL 32940 Phone: 321-610-8977 Fax: 321-574-3814 Email:
[email protected] [email protected] www.aitproducts.com Advanced Remediation, LLC, 5361 Young Pine Rd., Orlando, FL 32829 Phone: 407-234-1788 Fax: 407-380-5188 Email:
[email protected] [email protected] www.agfuels.biz Advanced Specialty Gases, 135 Catron Dr., Reno, NV 89512 Phone: 775-356-5500 Fax: 775-356-5571 Email: asg@
[email protected] www.advancedspecialtygases.com
Advanta Energy Corp., 2500 Old Crow Canyon Rd., Ste. 526, San Ramon, CA 94583 Phone: 925-831-8001 Email:
[email protected] [email protected] www.AdvantaEnergy.com AE&E - Von Roll, Inc., 302 Research Dr,. Ste. 300, Norcross, GA 30092 Phone: 770-613-9788 Fax: 770-613-9860 Email:
[email protected] www.aee-vonroll.com AE&E Austria GmbH & Co. KG, WaagnerWaagner- Biro-Platz 1, Raaba/ Graz, 8074 Austria Email:
[email protected] [email protected] www.aee-group.com
Aegion, 17988 Edison Avenue, St. Louis, MO 63005 Phone: 636-530-8000 Fax: 636-519-8010 www.aegion.com See our ad on p. 48 Aeris Corp., P.O. Box 2026, Kalamazoo, MI 49003 Phone: 269-207-7360 Fax: 269-375-4479 Email: jdurlach@aeriscorporation. com www.aeriscorporation.com AeroGo, Inc., 1170 Andover Park West, Tukwila, WA 98188 Phone: 206-575-3344 Fax: 206-575-3505 Email:
[email protected] www.aerogo.com Aerotek Energy Services, 7301 Parkway Dr., Hanover, MD 21076 Phone: 410-694-5483 Email:
[email protected] [email protected] www.aerotek.com Aggreko, 4540 Kendrick Plaza Drive, Suite 100, Houston, TX 77032 Phone: 877-795-0252 Fax: 281-985-8201 www.us.aggreko.com AGT Services, Inc., 24 Sam Stratton Rd., Amsterdam, NY 12010 Phone: 518-843-1112 Fax: 518-843-8389 Email:
[email protected] [email protected] www.agtservices.com
Air Engineering, Inc., 2075 S 170th St., New Berlin, WI 53151 Phone: 800-558-4318 Email:
[email protected] [email protected] www.airengineering.com Air Instruments & Measurements, LLC, 15404 E Valley Blvd., City of Industry, Industry, CA 91746-3325 Phone: 626-330-4700 Fax: 626-330-4776 Email:
[email protected] [email protected] www.aimanalysis.com Air Systems Ltd., 139, Velachery Road, Chennai, Tamilnadu, 600015 India Email: niti
[email protected] www.asplparts.com Airfloat LLC, 2230 Brush College Rd., Decatur, IL 62526 Phone: 217-423-6001 Fax: 217-422-1049 Email:
[email protected] www.airfloat.com Airflow Sciences Corp., 12190 Hubbard St., Livonia, MI 48150 Phone: 734-525-0300 Fax: 734-525-0303 Email:
[email protected] www.airflowsciences.com Airoflex Equipment, 6001 49th St. S, Muscatine, IA 52761 Phone: 563-264-8066 Fax: 651-631-2539 Email:
[email protected] www.airoflexequipment.com Airtrol, Inc., 920 S Highway Dr., Fenton, MO 63026 Phone: 636-326-4600 Fax: 636-326-4610 Email:
[email protected] [email protected] www.airtrol.com Aitech Defense Systems, 19756 Prairie St., Chatsworth, CA 91311 Phone: 888-248-3248 Fax: 818-718-9787 Email:
[email protected] [email protected] www.rugged.com Aitken Spence PLC, Aitken Spence Towers,305, Vauxhall Street, Colombo 02, Sri Lanka Phone: +94 11 2 308 308 Fax: +94 11 2 445 406 Email:
[email protected] [email protected] www.aitkenspence.com
AIMS, LLC, 1616 S 31st Ave., Phoenix, AZ 85009 Phone: 602-237-0292 Fax: 602-237-0294 Email: chris@
[email protected] www.azindustrialcleaning.com
www.powermag.com
|
POWER December 2013
Albemarle Environmental Division, 451 Florida St., Baton Rouge, LA 70801 Phone: 225-388-7402 Email:
[email protected] www.albemarle.com/mercury Albert Products, P.O. P.O. Box 1245, Springfield, IL 62705 Phone: 217-529-9600 Fax: 217-529-8919 Email:
[email protected] www.carhoe.com Alcatel-Lucent, 3, Avenue Octave Greard, Paris, 75007 France Phone: +33 (0)1 40 76 10 10 Fax: +33 (0)1 40 76 10 10 Email:
[email protected] www.alcatel-lucent.com/smart-grid Alchemy Consultants, Inc., 9144 Highland Ridge Way, Tampa, FL 33647-2277 Phone: 813-994-1654 Fax: 813-994-6095 Email:
[email protected] [email protected] Alcon Solenoid Valves, 369 Franklin St., Buffalo, NY 14202 Phone: 716-855-2500 Fax: 716-855-1400 Email:
[email protected] www.alconsolenoids.com Alden, 30 Shrewsbury St., Holden, MA 01520-1843 Phone: 508-829-6000 Fax: 508-829-5939 Email:
[email protected] www.aldenlab.com Aleasoft, Viladomat 1, 1º 1ª, Barcelona, 8015 Spain Phone: +34 93 289 20 29 Email:
[email protected] WWW.ALEASOFT.COM Alfa Laval, Maskinvej 5, Søborg, DK-2860 Denmark Phone: +45 39 53 60 00 Fax: +45 39 53 65 56 Email: s usanne.rosentoft@ usanne.rosentoft@ alfalaval.com www.alfalaval.com ALGAE-X International (AXI), 5400-1 Division Dr., Fort Myers, FL 33905 Phone: 239-690-9589 Email:
[email protected] www.algae-x.net
|
December 2013 POWER
Alignment Supplies, Inc., 1681 Lance Pointe Rd., Ste. 2, Maumee, OH 43537 Phone: 800-997-4467 Fax: 419-887-5893 Email:
[email protected] www.alignmentsupplies.com Alimak Hek, Inc., 1100 Boston Ave., Bridgeport, CT 06610 Phone: 203-367-7400 Fax: 203-367-9251 Email:
[email protected] www.alimakhek.com Allegheny Industrial Sales, Inc., 105 N Jamestown Rd., Moon Township, PA 15108 Phone: 412-262-9050 Fax: 412-262-9055 Email:
[email protected] www.allegheny-ind.com Allegro, 1445 Ross Ave., Ste. 2200, Dallas, TX 75202 Phone: 214-237-8000 Fax: 214-526-7076 Email:
[email protected] [email protected] www.allegrodev.com Allen Gears Ltd., Atlas Works, Station Road, Pershore, Pershore, WR10 2BZ United Kingdom Phone: +44 1386 552211 Email:
[email protected] www.allengears.com
Allen-Sherman-Hoff, 457 Creamery Way, Exton, PA 19341-2508 Phone: 484-875-1600 Fax: 484-875-2080 Email: dpi_marketing@diamon
[email protected] www.a-s-h.com Allied Industrial Marketing, Inc., W62 N248 Washington Ave., # 208, Cedarburg, WI 53012 Phone: 262-618-2403 Fax: 262-618-2303 Email: info@
[email protected] www.alliedindustrialmarketing.com Allied Power Group, 10131 Mills Rd., Houston, TX 77070 Phone: 281-444-3535 Fax: 281-444-3529 Email:
[email protected] www.alliedpg.com
Allied Union, Inc., 4704 Yorkshire St., Sugar Land, TX 77479 Phone: 281-980-1700 Email:
[email protected] www.alliedunion.com Alloy Bellows and Precision Welding, 653 Miner Rd., Highland Hts., OH 44143 Phone: 440-684-3000 X105 Email: d.scanlon@alloybellows. com www.alloybellows.com Alstom, 3 Avenue André Malraux, Levallois-Perret, 92300 France Phone: +33 1 4149 20 Fax: +33 1 4149 7925 Email: alexandra.weber@power alexandra.weber@power.. alstom.com www.alstom.com Alstom Projects India Ltd., First Floor, Brahmputra Bldg., Makarpura Gidc, Maneja, Vadodara, 390013 India Phone: 0265-6613367 Fax: 0265-6613080 Email: hi manshu.joshi@power. manshu.joshi@power. alstom.com www.alstom.co.in Alstom Thermal Services, 2800 Waterford Lake Dr., Midlothian, VA 23112 Phone: 804-763-2329 Email:
[email protected]. com www.power.alstom.com Alstom USA, 801 Pennsylvania Ave., NW, Ste. 855, Washington, DC 20004 Phone: 202-495-4960 Fax: 202-495-4961 Email: adam.r.pratt@power. adam.r.pratt@power. alstom.com www.alstom.com/us Altec Capital Services, LLC, 33 Inverness Center Pkwy., Ste. 200, Birmingham, AL 35242 Phone: 205-408-8077 Fax: 205-408-8113 Email:
[email protected] [email protected] www.alteccapital.com Alturdyne, 660 Steele St., El Cajon, CA 92020 Phone: 619-440-5531 Fax: 619-442-0481 Email:
[email protected] [email protected] www.alturdyne.com Amarillo Gear C o., P.O. P.O. Box 1789, Amarillo, TX 79105 Phone: 806-622-1273 Fax: 806-622-3258 Email:
[email protected] [email protected] www.amarillogear.com
www.powermag.com
Ambassador Heat Transfer Co., 10080 Alliance Rd., Cincinnati, OH 45242 Phone: 513-792-9800 Fax: 513-792-9933 Email:
[email protected] www.ambassadorco.com Ambitech, 1411 Opus Place, Suite 200, Downers Grove, IL 60515 Phone: 630-963-5800 Fax: 630-963-8099 www.ambitech.com
C O M P A N Y D I R E C T O R Y
AMEC, 1979 La keside Pkwy, Tucker, GA 30084 Phone: 770-688-2500 Fax: 770-688-2501 www.amec.com American Aerospace Controls, Inc., 570 Smith St., Farmingdale, NY 11735 Phone: 631-694-5100 Email:
[email protected] www.a-a-c.com American Association of Boiler Assessors, Inc., P.O. Box 310, Brooks, KY 40109 Phone: 502-562-0022 Email:
[email protected] www.aa-ba.org American DG Energy, Inc., 45 First Ave., Waltham, MA 02451 Phone: 781-522-6000 Fax: 781-522-6050 Email:
[email protected] www.americandg.com American Efficiency Services, LLC, 15925 North Ave., Woodbine, MD 21797 Phone: 410-489-0613 Fax: 410-489-6937 Email:
[email protected] www.americanefficiency.com American Electrical Testing Co., Inc., 480 Neponset St., P.O. Box 267, Canton, MA 02021 Phone: 800-992-3826 Fax: 781-821-0771 Email:
[email protected] www.99aetco.com American Exchanger Services, 1950 Innovation Way, Way, Hartford, WI 53027 Phone: 414-529-0067 Fax: 414-433-4839 Email:
[email protected] www.amexservices.com
65
Y R O T C E R I D Y N A P M O C
American Fire Technologies, Inc., 2120 Capital Dr., Wilmington, NC 28405 Phone: 910-799-9191 Fax: 910-799-3382 Email: gregr@americanfiretech. com www.americanfiretech.com
Amiad Filtration Systems, 2220 Celsius Ave., Oxnard, CA 93103 Phone: 805-988-3323 Fax: 805-988-3313 Email:
[email protected] www.amiad.com
Anixter, 4464 Willow Rd., #101, Pleasanton, CA 94588 Phone: 925-469-8751 Fax: 925-469-8750 Email:
[email protected] www.anixter.com
American Galvanizers Association, 6881 S Holly Cir., Ste. 108, Centennial, CO 80112 Phone: 720-554-0900 Fax: 720-554-0909 Email:
[email protected]
Amphenol Industrial Operations, 40-60 Delaware Ave., Sidney, Sidney, NY 13838 Phone: 800-678-0141 Fax: 607-563-5157 Email: cvansoest@amphenol-aio. com www.amphenol-industrial.com
Ansaldo Caldaie S.p.A., Largo Buffoni 3, Gallarate (VA), 21013 Italy Phone: 0331738111 Fax: 0331738794 Email: sales@a nsaldoboiler.it nsaldoboiler.it www.ansaldoboiler.it
American Industrial Supply, 351 Smith St., Perth Amboy, NJ 08862 Phone: 732-826-7600 Fax: 732-826-9182 Email:
[email protected] www.ameind.com
Ampirical Solutions, LLC, 4 Sanctuary Blvd., Ste. 100, Mandeville, LA 70471 Phone: 985-789-6726 Fax: 985-809-5250 Email:
[email protected] www.ampirical.com
American Polywater Corp., P.O. Box 53, Stillwater, MN 55082 Phone: 651-430-2270 Fax: 651-430-3634 Email:
[email protected] [email protected] www.polywater.com
AMREL/American Reliance, 3445 Fletcher Ave., El Monte, CA 91731 Phone: 626-443-6818 Fax: 626-443-8600 Email:
[email protected] www.amrel.com
American Pulverizer Co., 1319 Macklind Ave., St. Louis, MO 63110 Phone: 314-781-6100 Fax: 314-880-2293 Email:
[email protected] www.ampulverizer.com
Analysts, Inc., P.O. Box 2955, Torrance, Torrance, CA 90509-2955 Phone: 310-320-0070 Fax: 310-320-0970 Email:
[email protected] www.analystsinc.com
American Wind Energy Association, 1501 M St. NW, Ste. 1000, Washington, DC 20005 Phone: 202-383-2500 Fax: 202-383-2505 Email:
[email protected] www.awea.org AMETEK Land, Inc., 150 Freeport Rd., Blawnox, PA 15238 Phone: 412-826-4444 Fax: 412-826-4460 Email:
[email protected] www.ametek-land.com Ametek Power Instruments, 255 N Union St., Rochester, NY 14605 Phone: 585-263-7700 Fax: 585-262-4777 Email:
[email protected] www.ametekpower.com Ametek, Solidstate Controls, 875 Dearborn Dr., Columbus, OH 43085 Phone: 614-846-7500 Fax: 614-885-3990 Email:
[email protected] [email protected] www.solidstatecontrolsinc.com
66
Analytec Corp., 8828 S Kingston Ave., Tulsa, OK 74137-3000 Email:
[email protected] www.analytec.com Andax Industries, LLC, 613 W Palmer St., Saint Marys, KS 66536 Phone: 800-999-1358 Fax: 888-443-4732 Email:
[email protected] www.andax.com Andritz AG - Pumps Division, Stattegger Strasse 18, Graz, A-8045 Austria Phone: 43 316 6902 2509 Fax: 43 316 6902 413 Email:
[email protected] [email protected] www.andritz.com/pumps ANDRITZ Environmental Solutions, Inc., 9730 Patuxent Woods Dr., Ste. 100, Columbia, MD 21046 Phone: 410-910-5100 Fax: 410-910-5101 Email:
[email protected] [email protected] www.allied-env.com
Anvil Engineered Pipe Supports, 160 Frenchtown Rd., North Kingstown, RI 02852 Phone: 401-886-3005 Email:
[email protected] www.anvilintl.com Anvil International, 500 W Eldorado St., Decatur, IL 62522 Phone: 217-425-7354 Fax: 217-425-7537 Email:
[email protected] ap+m, 1811 Corporate Dr., Boynton Beach, FL 33426 Phone: 561-732-6000 Fax: 561-732-6562 Email:
[email protected] www.apm4parts.com APC by Schneider Electric, 132 Fairgrounds Rd., West Kingston, RI 02892 Phone: 888-994-8867 Fax: 401-788-2698 Email:
[email protected] www.gutor.com Apex Instruments, Inc., 204 Technology Park Ln., FuquayVarina, NC 27526 Phone: 919-557-7300 Fax: 919-557-7110 Email:
[email protected] www.apexinst.com APOYOTEC (Plantas de Energía), P.O. Box 272, 720 Snyder Creek Rd., Jefferson, CO 80456 Phone: 970-231-6032 Fax: 970-506-9229 Email:
[email protected] www.apoyotec.com Applied Bolting, 1413 Rockingham Rd., Bellows Falls, VT 05101 Phone: 802-460-3100 Fax: 802-460-3104 Email:
[email protected] www.appliedbolting.com
www.powermag.com
Applied Gas Turbines, a Division of Mid America Engine, 2500 State Hwy. 160, Warrior, AL 35180 Phone: 205-647-4312 Fax: 205-590-3885 Email: sales@appliedgasturbines. com www.appliedgasturbines.com Aptech Engineering Services, Inc., P.O. P.O. Box 3440, Sunnyvale, CA 94088-3440 Phone: 408-745-7000 Fax: 408-734-0445 Email:
[email protected] www.aptecheng.com Aquatech International Corp., One Four Coins Dr., Canonsburg, PA 15317 Phone: 724-746-5300 Fax: 724-746-5359 Email:
[email protected] www.aquatech.com Aquatic Sciences, L.P., 40 Centre Dr., Orchard Park, NY 14127 Phone: 716-667-3507 Fax: 716-667-3509 Email: blaurens@aquaticsciences. com www.aquaticsciences.com AquatiPro™, 211 12th St. SW, SW, Loveland, CO 80537 Phone: 970-593-1342 Fax: 970-461-1485 Email:
[email protected] www.aquatipro.com Aqua-Vu, 34076 County Rd. 3, P.O. Box 368, Crosslake, MN 56442 Phone: 218-297-0744 Fax: 218-692-4881 Email:
[email protected] www.aquavu.com Arc Machines, Inc., 10500 Orbital Way, Way, Pacoima, CA 91331 Phone: 818-896-9556 Email:
[email protected] www.arcmachines.com Ares Technology, Technology, LLC, 126 Corporate Dr., Ste. E, Simpsonville, SC 29681 Phone: 864-399-9805 Fax: 864-399-9809 Email:
[email protected] AREVA, Inc., 7207 IBM D r., Charlotte, NC 28262 Phone: 434-832-3702 Fax: 434-832-3840 Email: donna.gaddybowen@ areva.com www.us.areva.com
|
POWER December 2013
Arid Dry by Controlled DH (IMS), 5931 Ford Ct., Brighton, MI 48116 Phone: 810-229-7900 Fax: 810-229-7908 Email:
[email protected] www.cdims.com Aries Electronics, 2609 Bartram Rd., Bristol, PA 19007 Phone: 215-781-9956 Fax: 215-781-9845 Email:
[email protected] www.arieselec.com Arizona Instrument, LLC, 3375 N Delaware St., Chandler, AZ 85225 Phone: 602-470-1414 Fax: 480-804-0656 Email:
[email protected] www.azic.com Armstrong-Hunt, Armstrong-Hunt, Inc., 648 Moeller St., Granby, QC J2G 8N1 Canada Phone: 450-378-2655 Fax: 450-375-3787 Email: jrsmith@a rmstronginterrmstronginternational.com www.armstronginternational.com ASB Industries, Inc., 1031 Lambert St., Barberton, OH 44203 Phone: 330-753-8458 Fax: 330-753-7550 Email:
[email protected] www.asbindustries.com Asco Valve, Inc., 50 Hanover Rd., Florham Park, NJ 07932 Phone: 973-966-2000 Fax: 973-966-2448 Email:
[email protected] www.ascovalve.com ASGCO Manufacturing, Inc., 301 Gordon St., Allentown, PA 18102 Phone: 800-344-4000 Fax: 610-778-8991 Email:
[email protected] www.asgco.com Ashland Water Technologies, Technologies, Drew Industrial, One Drew Plaza, Boonton, NJ 07005 Phone: 973-263-7600 Fax: 973-263-4483 www.drewindustrial.com ASI Group Ltd., 250 Martindale Rd., St. Catharines, ON L2R 7R8 Canada Phone: 905-641-0941 Fax: 905-641-1825 Email:
[email protected] www.asi-group.com
|
December 2013 POWER
Asia Carbon Energy, 5F, CBD International Mansion, No.16 Yong An Dong Li, Chaoyang District, Beijing, P R China, Beijing, 100022 China Phone: 86 10 65637762 Fax: 86 10 6563 7612 Email:
[email protected] [email protected] www.a-carbon.com ASME, Two Park Avenue, New York, NY 10016 Phone: 973-882-1170 www.asme.org Associated Electric Products, Products, Inc., P.O. Box 6713, Longmont, CO 80501 Phone: 800-361-6314 Email:
[email protected] www.assoc-elec-prod.com Aston Evaporative Services, 743 Horizon Ct., Ste. 250, Grand Junction, CO 81506 Phone: 970-242-7003 Fax: 970-256-7006 Email: kevink@astoncompanies. com www.astoncompanies.com Astro Arc Polysoude, Inc., 24856 Rockfeller Ave., Valencia, CA 91355 Phone: 661-702-0141 Fax: 661-702-0632 Email:
[email protected] www.astroarc.com ATCO Emissions Management, 260 Holiday Inn Dr., Dr., Unit 1, Cam bridge, bridge, ON N2P 2V1 Canada Phone: 519-220-0600 Fax: 519-220-0602 Email:
[email protected] www.atcoem.com Atlantic Plant Services, 10440 Little Patuxent Pkwy., Ste. 600, Columbia, MD 21044 Phone: 800-433-0438 Fax: 815-730-3350 Email: kelly.simonsen@atlanticii. kelly.simonsen@atlanticii. com Atlas Business Solutions, Inc. (ABS), 3330 Fiechtner Dr. SW, Fargo, ND 58104 Phone: 701-235-5226 ext.117 Email:
[email protected] www.abs-usa.com Atlas Copco Compressors, LLC, 1800 Overview Dr., Rock Hill, SC 29730 Phone: 866-546-3588 Email: paul.humphreys@ us.atlascopco.com www.atlascopco.us
Atlas Copco Tools and Assembly Systems, 2998 Dutton Rd., Auburn Hills, MI 48326 Phone: 248-373-3000 Email: a ssembly.tools@ ssembly.tools@ us.atlascopco.com www.atlascopco.us ATM Air Freight, 1924 Rankin Rd. Ste. 300, Houston, TX 77073 Phone: 281-821-2002 Fax: 281-443-0938 Email:
[email protected] Atomizing Systems, Inc., Bldg. #1, 1 Hollywood Ave., Hohokus, NJ 07423 Phone: 201-447-1222 Fax: 201-447-6932 Email:
[email protected] www.coldfog.com AUMUND Fördertechnik GmbH, Saalhoffer Strasse 17, Rheinberg, 47495 Germany Phone: 492843720 Fax: 49284360270 Email:
[email protected] [email protected] www.aumund.com Automated Appointment Reminders, 30150 Telegraph Rd., Bingham Farms, MI 48025 Phone: 800-962-0126 Email:
[email protected] www.voiceshot.com/public/ appointment-reminder.asp Automation Products, Inc. - DYNATROL® NATROL® Division, 3030 Maxroy St., Houston, TX 77008-6294 Phone: 713-869-0361 Fax: 713-869-7332 Email:
[email protected] www.DynatrolUSA.com Automation Technology, Inc., 2001 Gateway Pl., Ste. 100, San Jose, CA 95110 Phone: 408-350-7020 Fax: 408-350-7021 Email:
[email protected] www.atinet.com Automation Training, Inc., 1067 East Woolley, Carlisle, IN 47838 Phone: 866-573-9849 Email:
[email protected] www.atifortraining.com
www.powermag.com
AVA Americas, LLC./AVA-Huep GmbH u. Co. KG, Heinestrasse 5, Herrsching, 82211 Germany Phone: +49 8152-9392-0 Fax: +49 8152-939291 Email:
[email protected] www.ava-huep.com AVO Training Institute, Inc., 4271 Bronze Way, Dallas, TX 75237 Phone: 877-594-3156 Fax: 214-331-7363 Email: avotraining@avotraining. com www.avotraining.com
C O M P A N Y D I R E C T O R Y
AZZ | N L I, 7410 Pebble Dr., Dr., Fort Worth, TX 76118 Phone: 800-448-4124 Email:
[email protected] www.azz.com/nli
B B & H Engineering, 5773 Rutledge Trail, Liberty Township, OH 45011 Phone: 888-742-9783 Fax: 866-742-9783 Email: tosterhouse@
[email protected] www.geographicmarkers.com B&W Mechanical Handling Ltd., Gemini House, Cam bridgeshire bridgeshire Business Park 1, Bartholomew’s Walk, Ely, Ely, CB7 4EA United Kingdom Email:
[email protected] www.bwmech.co.uk b3o enviroTek, 695 Nashville Pike, No. 310, Gallatin, TN 37066 Phone: 615-989-1576 Fax: 615-451-5044 Email: budr@locateunderground. budr@locateunderground. com www.locateunderground.com Babcock & Wilcox Co., 20 S Van Buren Ave., Barberton, OH 44203 Phone: 330-753-4511 Fax: 330-860-1886 Email:
[email protected] www.babcock.com See our ad on p. 7
67
Y R O T C E R I D Y N A P M O C
Babcock Power Environmental, Inc., 5 Neponset St., P.O. Box 15040, Worcester, Worcester, MA 01615-0040 Phone: 508-852-7100 Fax: 508-854-3800 Email:
[email protected] www.babcockpower.com
Babcock Power, Inc., 6 Kimball Ln., Ste. 210, Lynnfield, MA 01940 Phone: 978-646-3300 Fax: 978-646-3301 Email:
[email protected] www.babcockpower.com
Baldor Electric Co., 5711 R.S. Boreham, Jr St., Ft. Smith, AR 72901 Phone: 479-646-4711 Fax: 479-648-5792 Email:
[email protected] www.baldor.com See our ad on p. 21
Basic Wire & Cable, 3900 N Rockwell St, Chicago, IL 60618 Phone: 773-539-1800 Fax: 773-539-3500 Email:
[email protected] www.basicwire.com Basler Electric, 12570 State Route 143, Highland, IL 62249 Phone: 618-654-2341 Email:
[email protected] www.basler.com Bauer Compressors, Inc., 1328 Azalea Garden Rd., Norfolk, VA 23502 Phone: 757-855-6006 Fax: 757-857-1041 Email:
[email protected] [email protected] www.bauercomp.com
Banner Engineering, 9714 Tenth Ave. North, Minneapolis, MN 55441 Phone: 800-809-7043 Fax: 763-544-3123 Email:
[email protected] www.bannerengineering.com
BE&K Construction Co., LLC, 2000 International Park Dr., Birmingham, AL 35243 Phone: 205-972-6618 Fax: 205-972-6807 Email:
[email protected] www.bek.com
Bannerstone Energy, 7 Buerger Rd., Mobile, AL 36608 Phone: 251-344-2534 Email: pstabler@
[email protected] www.bannerstoneenergy.com
Beamex, Inc., 2152 Northwest Pkwy., Ste. A, Marietta, GA 30067 Phone: 800-888-9892 Fax: 770-951-1928 Email:
[email protected] www.beamex.com
Barnhart, 26374 Pollard Rd., Ste. B, Daphne, AL 36526 Phone: 800-587-3249 Fax: 251-654-0547 Email: thughes@barnhartcrane. com
Beaudrey A.S., 343 West Drake Rd., Ste. 240, Fort Collins, CO 80526 Phone: 970-204-1573 Email: beaudreyas@beaudreyas. com www.beaudreyas.com
Barry Persky & Co., Inc., 31 Taunton Ln., Newtown, CT 06470 Phone: 203-270-6700 Fax: 203-270-6702 Email:
[email protected] [email protected] www.barrypersky.com
Bechtel, 5275 Westview Dr., Frederick, MD 21703 Phone: 301-228-8609 Email:
[email protected] [email protected] www.Bechtel.com
BARTEC GmbH, Max-Eyth-Str. 16, Bad Mergentheim, 97980 Germany Phone: +49 7931 597-0 Fax: +49 7931 597-119 Email:
[email protected] www.bartec.de
68
Basic Concepts, 1310 Harris Bridge Rd., Anderson, SC 29621 Phone: 800-285-4203 Fax: 864-224-7063 Email:
[email protected] [email protected] www.basicconcepts.com
R
ELECTRIC ACTUATORS
Beck, Harold Beck & Sons, Inc., 11 Terry Dr., Newtown, PA 18940 Phone: 215-968-4600 Fax: 215-860-6383 Email:
[email protected] [email protected] www.haroldbeck.com
Beckwith Electric Co., Inc., 6190 118th Ave. North, Largo, FL 33773-3724 Phone: 727-544-2326 Fax: 727-546-0121 Email: marketing@
[email protected] www.beckwithelectric.com Bedeschi America, Inc., 3275 W Hillsboro Blvd., Ste. 312, Deerfield Beach, FL 33442 Phone: 954-602-2175 Email:
[email protected] www.bedeschiamerica.com Beetle Plastics, LLC, Ardmore Industrial Airpark, P.O. Box 1569, Ardmore, OK 73402 Phone: 580-389-5421 Fax: 580-389-5424 Email:
[email protected] [email protected] www.beetleplastics.com Belgrave Management Ltd., Ste 3, Poseidon Ct Cyclops Wharf, Docklands, London, E14 3UG United Kingdom Phone: +44 020 7193 8707 Fax: +44 020 8593 7690 Email:
[email protected] [email protected] www.belgraveltd.com Belt Conveyor Guarding, 3478 Penetanguishene Rd., Barrie, ON L4M 4Y8 Canada Phone: 866-300-6668 Fax: 705-725-8835 Email: safety@
[email protected] www.conveyorguarding.com Belt Tech, P.O Box 620,Washington, IN 47501 Phone: 877-554-BELT Email:
[email protected] www.belttech1.com Beltran Technologies, Inc., 1133 East 35th St., Brooklyn, NY 11210 Phone: 718-338-3311 Fax: 718-253-9028 Email:
[email protected] [email protected] www.Beltrantechnologies.com Beltservice de Mexico, Gustavo Baz 305 Colonia La Loma, Tlalnepantla, Edo. de MX, 54060 Mexico Phone: 5-5362-0434 Fax: 5-5362-0261 Email: ventasmexico@beltservice. com www.beltservicedemexico.com
www.powermag.com
Belyea Co., Inc., 2200 Northwood Ave., Easton, PA 18045 Phone: 610-515-8775 Fax: 610-258-1230 Email:
[email protected] www.belyeapower.com Belzona Western Ltd., 10732 Maple Bend Dr. S.E., Calgary, AB T2J 1X5 Canada Phone: 403-225-0474 Fax: 403-278-8898 Email:
[email protected] [email protected] www.belzona.ca
Benetech, 2245 Sequoia Dr., Ste. 300, Aurora, IL 60506 Phone: 630-844-1300 Fax: 630-844-0064 Email:
[email protected] [email protected] www.benetechglobal.com Benjamin Co., 3575 East Oak Lake Rd., Port Clinton, OH 43452 Phone: 419-366-0950 Fax: 419-285-2585 Email:
[email protected] www.kenben.com Bently Pressurized Bearing Co., 1711 Orbit Way, Minden, NV 89423-4114 Phone: 775-783-4600 Fax: 775-783-4650 Email:
[email protected] www.bentlypressurizedbearing.com Berthold Technologies USA, LLC, 99 Midway Ln., Oak Ridge, TN 37830 Phone: 865-483-1488 Fax: 865-425-4309 Email: berthold-us@
[email protected] www.berthold-us.com Beu-Math Engineering, Inc., 3201 W Harrison St., Phoenix, AZ 85009 Phone: 602-323-0436 Fax: 602-265-5431 Email:
[email protected] [email protected] Beumer Kansas City, LLC, 4435 Main St., Ste. 600, Kansas City, MO 64111 Phone: 816-245-7262 Email:
[email protected] [email protected] www.beumer.com
|
POWER December 2013
BEUMER Maschinenfabrik GmbH & Co. KG, Oelder Str. 40, Beckum, 59269 Germany Phone: 0.000809864 Fax: 279.9991901 Email:
[email protected] [email protected] www.beumer.com
BHI Energy, 60 Industrial Park Rd., Plymouth, MA 02360 Phone: 508-591-1149 Fax: 508-591-1397 Email:
[email protected] www.bhienergy.com See our ad on p. 1 Bianchi Industrial Services, LLC, 208 Long Branch Rd., Ste. 300, Syracuse, NY 13209 Phone: 315-453-0001 Fax: 315-453-0033 Email: dbianchi@bianchidem
[email protected] o.com www.bianchidemo.com Bibb EAC, 3131 Broadway, Kansas City, MO 64111 Phone: 816-285-5500 Email:
[email protected] www.bibb-eac.com BICE Engineering and Consulting, 5729 Lebanon Rd., Ste. 144 PMB 353, Frisco, TX 75034-7259 Phone: 214-883-3675 Fax: 972-668-0563 Email: bemay@bice-eeconsulting. com www.bice-eeconsulting.com Bierlein Companies, 2000 Bay City Rd., Midland, MI 48642 Phone: 800-336-6626 Fax: 989-496-0144 Email:
[email protected] Big Top Manufacturing, 3255 North US 19, Perry, FL 32347 Phone: 850-584-7786 Fax: 850-584-7713 Email:
[email protected] www.bigtopshelters.com Bilfinger Berger Power Services GmbH, Duisburger Str. 375, Oberhausen, 46049 Germany Phone: +49 208 4575 7740 Fax: +49 208 4575 2170 Email: andreas.goebel@bbps. andreas.goebel@bbps. bilfinger.com www.bbps.bilfinger.com
|
December 2013 POWER
Binder Group Pty Ltd., 26 Miles Rd., Kewdale, 6105 Australia Phone: + 61 8 9353 2208 Fax: + 61 8 9353 2806 Email:
[email protected] www.bindergrp.com
Bonetti, S.p.A., 8311 Brier Creek Pkwy., Ste. 105-257, Raleigh, NC 27617 Phone: 919-806-3880 Fax: 919-806-8774 Email:
[email protected] www.bonetti-valves.com
BinMaster Level Controls, 7201 N 98th St., P.O. Box 29709 (68529), Lincoln, NE 68507 Phone: 402-434-9102 Fax: 402-434-9133 Email:
[email protected] [email protected] www.binmaster.com
BORSIG GmbH, Egellsstr. 2, Berlin, WV 13507 Germany Phone: ++49 30 430101 Fax: ++49 30 43012622 Email:
[email protected] www.borsig.de
BIOFerm Energy Systems, 617 N Segoe Rd., Ste. 202, P.O. Box 5408, Madison, WI 53705 Phone: 608-467-5523 Fax: 608-233-7085 Email: info@biofermenergy
[email protected] .com www.biofermenergy.com
Bowman (Birmingham) Ltd., Chester St., Birmingham, B6 4AP United Kingdom Phone: 0044-121-359 5401 Fax: 0044-121-359 7495 Email:
[email protected] www.ejbowman.co.uk
Bird Machine Co., 1600 Providence Hwy., Ste. 45, Walpole, MA 02081-2544 BIS Both Industrial Services BV, BV, P.O. Box 6007, Da Vlaardingen, 3130 Netherlands Phone: 31 10 2497046 Fax: 31 10 2497047 Email:
[email protected] www.bisboth.nl Blac, Inc., 195 Spamler Ave., Elmhurst, IL 60126 Phone: 630-279-6400 Fax: 630-279-1005 Email:
[email protected] Blome International, 1450 Hoff Industrial Dr., Dr., O’Fallon, MO 63366 Phone: 636-379-9119 Fax: 636-379-0388 Email:
[email protected] www.blome.com BMC P. Ltd., B-184 Okhla Industrial Area Phase-1, New Delhi, 110020 India Phone: +91 11 26812554 Fax: +91 11 26371343 Email:
[email protected] www.bihanigroup.com Boiler Tube Co. of America, 506 Charlotte Hwy., P.O. Box 849, Lyman, SC 29365 Phone: 864-439-4489 Fax: 864-439-8292 Email:
[email protected] www.boilertubes.com Boldrocchi Srl, Viale Trento e Trieste, Trieste, 93, Biassono, 20046 Italy Phone: 39-039-22021 www.boldrocchi.it
Braden Mfg., LLC, 5199 N Mingo Rd., P.O. Box 1229, Tulsa, OK 74117 Phone: 918-272-5371 Fax: 918-272-7414 Email:
[email protected] www.braden.com Brand Energy & Infrastructure Services, 2505 South Main St., Kennesaw, Kennesaw, GA 30144 Phone: 905-660-8176 Fax: 905-738-1391 Email:
[email protected] www.beis.com Brandenburg Industrial Service Co., 2625 South Loomis St., Chicago, IL 60608 Phone: 312-326-5800 Fax: 312-326-5055 Email: e
[email protected] [email protected] BRAY Controls, Division of Bray International, Inc., 13333 Westland East Blvd., Houston, TX 77041 Phone: 281-894-5454 Fax: 281-894-0077 Email:
[email protected] [email protected] www.bray.com
Breen Energy Solutions, 104 Broadway St., Carnegie, PA 15106 Phone: 412-431-4499 Email:
[email protected] www.breenES.com
www.powermag.com
Brown Wood Preserving Co., Inc., P.O. Box 30536, Pensacola, FL 32503 Phone: 850-484-7653 Fax: 850-476-9999 Email:
[email protected] www.brownwoodpensacola.com BRUKS Rockwood, 5975 Shiloh Rd., Ste. 109, Alpharetta, GA 30005 Phone: 770-849-0100 Fax: 770-495-7195 Email:
[email protected] www.bruks.com
C O M P A N Y D I R E C T O R Y
BRUSH Turbogenerators, Falcon Works, Nottingham Rd. Loughborough, Leicestershire, Leicestershire, LE11 1EX United Kingdom Email:
[email protected] www.brush.eu Buckman Laboratories Inc., Water Technologies, Technologies, 1256 N McLean Blvd., Memphis, TN 38108 Phone: 901-272-8386 Fax: 901-276-6890 Email:
[email protected] www.buckman.com Buell APC, 200 North Seventh St., Ste. 2, Lebanon, PA 17046 Phone: 717-274-7110 Fax: 717-274-7342 Email:
[email protected] www.BuellAPC.com Bulldog Erectors, Inc. - Crane Division, P.O. Box 879, Newberry, SC 29108 Phone: 910-620-1305 Fax: 803-276-6915 Email: bulldogcranediv@hotmail. bulldogcranediv@hotmail. com Burns & McDonnell - Energy Division, 9400 Ward Parkway, Kansas City, MO 64114 Phone: 816-822-3230 Fax: 816-333-3690 Email:
[email protected] www.burnsmcd.com See our ad on Cover 2
C C.C. Jensen, Inc. Oil Maintenance, 320 Coweta Industrial Pkwy., Ste. J, Newnan, GA 30265 Phone: 770-692-6001 Fax: 770-692-6006 Email:
[email protected] www.ccjensen.com
69
Y R O T C E R I D Y N A P M O C
C.H.Robinson Worldwide, 5550 North Riverside Dr., Fort Worth, TX 76137 Phone: 866-797-9370 Email:
[email protected] www.chrobinson.com/flatbed
Camarines sur Polytechnic College, Peñafrancia Avenue Naga City San Vicente, libmanan, 4407 Philippines Phone: 9197871757 Email:
[email protected]
C.I.Agent Solutions, LLC, 11760 Commonwealth Dr., Louisville, KY 40299 Phone: 502-267-0101 Fax: 502-267-0181 Email:
[email protected] www.ciagent.com
Cambria Contracting, Inc., 5105 Lockport Rd., Lockport, NY 14094 Phone: 716-625-6690 Fax: 716-625-6693 Email:
[email protected] www.cambriacontracting.com
C.M.G. and Associates, Inc., 1757 Madison Ave., North Port, FL 34286 Phone: 941-429-0890 Fax: 614-386-5591 Email:
[email protected]
CAMCORP, Inc., 9732 Pflumm Rd., Lenexa, KS 66215 Phone: 913-831-0740 Fax: 913-831-9271 Email:
[email protected] www.camcorpinc.com
C.S. Osborne & Co, 125 Jersey St., Harrison, NJ 07029 Phone: 973-483-3232 Fax: 973-484-3621 Email:
[email protected] www.csosborne.com
Camfil Farr Power Systems, 2785 Ave. Francis Hughes, Laval, QC H7L 3J6 Canada Phone: 800-976-9382 Fax: 450-629-5847 Email: gt.americas@camfilfarr
[email protected] .com www.camfilfarr.com/ps/
C.U.E., Inc., 11 Leonberg Rd., Cranberry Township, PA 16066 Phone: 724-772-5225 Fax: 724-772-5280 Email:
[email protected] www.cue-inc.com Cain Industries, Inc., W194 N11826 McCormick Dr., Germantown, WI 53022 Phone: 262-251-0051 Fax: 262-251-0118 Email:
[email protected] www.cainind.com Caldwell Energy/Caldwell Tanks, 4000 Tower Rd., Louisville, KY 40219 Phone: 502-964-3361 Fax: 502-810-0983 Email:
[email protected] Calgon Carbon, 400 Calgon Carbon Drive, Pittsburgh, PA 15205 Phone: 412-787-6700 Fax: 412 787-6676 www.calgoncarbon.com Calpine Corp., 50 W San Fernando, San Jose, CA 95113 www.calpine.com Calvert Wire & Cable Corp., 5091 West 164th St., Brook Park, OH 44142 Phone: 216-433-7618 Fax: 216-433-7618 Email: jvaughan@calvert-wire. com www.calvert-wire.com 70
Canadian Buffalo, 465 Laird Rd., Guelph, ON N1G 4W1 Canada Phone: 519-837-1921 Fax: 519-837-2380 Email:
[email protected] www.canadianbuffalo.com Canasia Power Corp., Ste. 306, 73 Simcoe St., Toronto, ON M5J 1W9 Canada Phone: 416-363-1815 Email:
[email protected] www.canasiapower.com Cannon Technologies, Inc., 8301 Golden Valley Rd., #300, Minneapolis, MN 55427 Phone: 763-595-7777 Fax: 763-595-7776 Email:
[email protected] www.cannontech.com Capstone Turbine Corp., 21211 Nordhoff Nordhoff St., Chatsworth, CA 91311 Phone: 818-734-5300 Fax: 818-734-5385 Email:
[email protected] www.capstoneturbine.com Carboline, 2150 Scheutz Road, St. Louis, MO 63146 Phone: 888-227-2654 www.carboline.com
Carling Technologies, 60 Johnson Ave., Plainville, CT 06062 Phone: 860-793-9281 Email:
[email protected] www.carlingtech.com CarrierClass Green Infrastructure, Infrastructure, 400 Stenton Ave., Ste. 214, Plymouth Meeting, PA 19462 Phone: 267-419-8496 Fax: 215-565-2746 Email:
[email protected] www.ccgigogreen.com Carver Pump Co, 2415 Park Ave, Muscatine, IA 52761 Phone: 563-263-3410 Email:
[email protected] www.carverpump.com Carzoli Engineering Sales, 1541 Ginny Ln., Woodstock, IL 60098 Phone: 815-245-0066 Fax: 815-338-4604 Email: cescarzolieng@sbcglobal. net www.carzoli-engineering.com Casey Industrial, Inc., 11845 Teller St., Broomfield, CO 80020 Phone: 303-460-1274 Fax: 303-465-5562 Email:
[email protected] www.caseyind.com Cat Pumps, 1681 94th Ln. NE, Minneapolis, MN 55449-4324 Phone: 763-780-5440 Fax: 763-780-2958 Email:
[email protected] [email protected] www.catpumps.com Caterpillar Inc., P.O. Box 610, N4 AC6109, Mossville, IL 61552 Phone: 800-321-7332 Fax: 309-578-2559 Email:
[email protected] www.cat-electricpower.com CB&I, 2103 Research Forest Dr., The Woodlands, TX 77380-2624 Phone: 832-513-1000 Fax: 832-513-1005 Email:
[email protected] www.CBI.com See our ad on p. 3 CBP Engineering Corp., 185 Plumpton Ave., Washington, PA 15301 Phone: 724-229-1180 Fax: 724-229-1185 Email: halulko@cpbengineering. com www.cpbengineering.com
www.powermag.com
CCC Group, Inc., 5660 Greenwood Plaza Blvd., Ste. 445, Greenwood Village, CO 80111 Phone: 303-581-1070 Fax: 303-530-3208 Email:
[email protected] www.cccgroupinc.com CCI (Control Component, Inc.), Severe Service Valve Solutions, 22591 Avenida Empresa, Rancho Santa Margarita, CA 92688 Phone: 949-888-1877 Fax: 949-635-5151 Email:
[email protected] www.ccivalve.com CD-adapco, 60 Broadhollow Rd., Melville, NY 11747 Phone: 631-549-2300 Fax: 631-549-2654 Email:
[email protected] www.cd-adapco.com CDR Systems Group, 146 South Atlantic Ave., Ormond Beach, FL 32176 Phone: 386-615-9510 Fax: 386-615-9606 Email:
[email protected] www.westernpowerproducts.com CE Power S olutions, P.O. P.O. Box 147, Lake Hamilton, FL 33851 Phone: 863-439-2992 Fax: 863-439-2991 Email: ncampbell@cepowersol. com www.cepowersol.com CEC Vibration Products, Inc., 746 Arrow Grand Circle, Covina, CA 91722 Phone: 626-938-0200 Fax: 626-938-0202 Email:
[email protected] www.cecvp.com CECO Compressor Engineering Corp., 5440 Alder Dr., Houston, TX 77081 Phone: 713-664-7333 Fax: 713-664-6444 Email:
[email protected] www.tryceco.com Ceilcote Products / International Paint, LLC, 640 N Rocky Rive r Dr., Berea, OH 44017 Phone: 440-234-2900 Fax: 440-234-7466 Email:
[email protected] www.ceilcotecc.com
|
POWER December 2013
CEMTEK Environmental, 3041 S Orange Ave., Santa Ana, CA 92707 Phone: 714-437-7100 Fax: 714-437-7177 Email:
[email protected] www.cemteks.com Centrax Ltd., Shaldon Rd., Newton Abbot, TQ12 4SQ United Kingdom Phone: +44(0)1626 358 000 Fax: +44(0)1626 358 158 Email:
[email protected] www.centraxgt.com Cerrey SA de C V, Republica Mexicana #300, San Nicolas de los Garza NL, 63450 Mexico Email: ea
[email protected] [email protected] www.cerrey.com.mx Certified Occupational Safety Specialist (COSS), 8180 Siegen Ln., Baton Rouge, LA 70810 Phone: 225-766-0955 Fax: 225-766-1099 Email:
[email protected] Cesare Bonetti, Inc., 17, Via Cesare Bonetti, Garbagnate Milanese, I-20024 Italy Phone: +3902 99072444 Fax: +3902 99072400 Email:
[email protected] www.cesare-bonetti.it CFM/VR-TESCO, LLC, Continental Field Machining, 1875 Fox Ln., Elgin, IL 60123 Phone: 800-323-1393 Fax: 847-895-7006 Email:
[email protected] [email protected] CGV Engineering Services Ltd., 13 France St. Westhoughton, Bolton, BL5 2HG United Kingdom Phone: 07823 322681 Fax: 01942 817285 Email:
[email protected] www.cgvengineeringservices. co.uk CH2M Hill, 303 Perimeter Center N, Ste. 800, Atlanta, GA 30346 Phone: 770-829-6514 Fax: 770-829-6600 Email: alan.champagne@ch2m. com www.ch2m.com/power Champion Valves, Inc., P.O. Box 12901, Wilmington, NC 28405 Phone: 910-794-5547 Fax: 910-794-5581 Email:
[email protected] www.wafercheck.com
|
December 2013 POWER
Chanute Manufacturing, 5727 S Lewis, Ste. 600, Tulsa, OK 74105 Phone: 918-491-9191 Email:
[email protected] www.chanutemfg.com Chatham Steel Corp., 501 W Boundary, P.O. Box 2567, Savannah, GA 31498 Phone: 800-869-2762 Fax: 919-682-0322 Email:
[email protected] www.chathamsteel.com CHEMetrics, Inc., 4295 Catlett Rd., Calverton, VA 20138 Phone: 800-356-3072 Fax: 540-788-4856 Email:
[email protected] www.chemetrics.com Chemetron Fire Systems, 4801 Southwich Dr., 3rd Floor, Matteson, IL 60442 Phone: 708-748-1503 Fax: 708-283-6500 Email:
[email protected] Chesapeake Soda Clean, Inc., 212 Najoles Rd., Bldg. D, Millersville, MD 21108 Phone: 410-271-2652 Email:
[email protected] www.chesapeakesodaclean.com Chromalloy, Chromalloy, 3999 RCA Blvd., Palm Beach Gardens, FL 33410 Phone: 561-935-3571 Email:
[email protected] www.chromalloy.com Chromalox, Inc., 103 Gamma Dr., Pittsburgh, PA 15238 Phone: 484-369-8526 Fax: 484-369-8526 Email:
[email protected] www.chromalox.com Chromium Corp., 14911 Quorum Dr., Ste. 600, Dallas, TX 75254 Phone: 972-851-0487 Fax: 972-851-0461 Email:
[email protected] www.chromcorp.com Cianbro, 101 Cianbro Sq., P.O. Box 1000, Pittsfield, ME 04967 Phone: 207-487-3311 Email:
[email protected] www.cianbro.com Citel Surge Protection, 1515 NW 167th St., Ste. #6-303, Miami, FL 33169 Phone: 305 621 0022 Fax: 305 621 0766 Email:
[email protected] www.citelprotection.com
Clear Lake Filtration, 400 Hobbs Rd., #102, League City, TX 77573 Phone: 281-534-9112 Fax: 281-534-9269 Email: dlewis@clearlakefiltration. com www.clearlakefiltration.com ClearSpan Fabric Structures, 1395 John Fitch Blvd., South W indsor, indsor, CT 06074 Phone: 866-643-1010 Fax: 860-760-0210 Email:
[email protected] www.ClearSpan.com ClearView Monitoring Solutions, 19 Hartum St., Har Hotzvim Science Park, Jerusalem, 91450 Israel Phone: +972 2 5400920 Fax: +972 2 5400044 Email: sales@clearviewmonitoring. com www.clearviewmonitoring.com Cleaver-Brooks, 11950 W Lake Park Dr., Milwaukee, WI 53224 Phone: 414-359-0600 Fax: 414-359-3159 Email:
[email protected] www.cleaver-brooks.com
Clyde Bergemann Power Group, 4015 Presidential Pkwy., Atlanta, GA 30340 Phone: 770-557-3600 Fax: 770-557-3641 Email:
[email protected] www.cbpg.com Clyde Bergemann Bachmann, 416 Lewiston Junction Rd., P.O. Box 2150, Auburn, ME 04211 Phone: 207-784-1903 Fax: 207-784-1904 Email:
[email protected] www.cbbachmann.com CMP Coatings, Inc., 1610 Engineers Rd., Belle Chasse, LA 70037 Phone: 504-392-4817 Email:
[email protected] www.cmp.co.jp Coal Recovery Investments Ltd., 8 Willowbrook Llandogo Rd., St Mellons, CF3 0EF United Kingdom Email:
[email protected] www.gwarexpolska.pl
www.powermag.com
CoaLogix, 11701 Mt. Holly Rd., Charlotte, NC 28214 Phone: 704-827-8933 Fax: 704-827-8935 Email:
[email protected] www.CoaLogix.com Coffman Electrical Equipment Co., 3300 Jefferson Ave. SE, Grand Rapids, MI 49548 Phone: 616-452-8708 Fax: 616-452-1337 Email:
[email protected] www.steadypower.com
C O M P A N Y D I R E C T O R Y
Cogen Power, Inc., 36929 Meadowdale Dr., Solon, OH 441393077 Phone: 440-498-1676 Fax: 440-498-1676 Email:
[email protected] Colmac Coil Manufacturing, Inc., P.O. Box 571, Colville, WA 991140571 Phone: 509-684-2595 Fax: 509-684-8331 Email:
[email protected] www.colmaccoil.com
Columbia Steel Casting Co, Inc., 10425 N Bloss Ave., Portland, OR 97203 Phone: 503-286-0685 Fax: 503-286-1743 Email:
[email protected] www.columbiasteel.com Columbian TecTank, Inc., 9701 Renner Blvd., Ste. 150, Lenexa, KS 66219 Phone: 316-421-0200 Fax: 316-421-9122 Email: sales@columbiantectank. com www.columbiantectank.com Columbus McKinnon, 140 John James Audubon, Amherst, NY 14228 Phone: 716-689-5678 Email:
[email protected] www.cmindustrial.com Commerce Lanes, Inc., 806 Rosa St., Celebration, FL 34747 Phone: 321-939-2961 Fax: 321-939-1151 Email: business@commercelanes. com
71
Y R O T C E R I D Y N A P M O C
Commodities Consulting & Asset Management COMCAM, Eigenhaardstraat 10, Middelburg, 4331HS Netherlands Email:
[email protected] www.com-cam.com Commonwealth Dynamics, Inc., 95 Court St., Portsmouth, NH 03801 Phone: 603-433-6060 Fax: 603-436-0944 Email:
[email protected] www.comdynam.com Compact Automation Products, LLC, 105 Commerce Way, Way, Westminser, SC 29687 Phone: 864-647-9521 Fax: 864-647-9574 Email:
[email protected] www.compactautomation.com Computer Power Supply, 7313 SW Tech Center Dr., Tigard, OR 97223 Phone: 503-684-8026 Email:
[email protected] www.cpshv.com ComRent International, LLC, 7640 Investment Ct., Unit A, Owings, MD 20736 Phone: 410-257-3000 Fax: 410-257-2240 Email:
[email protected] www.comrent.com Concepts NREC, 217 Billings Farm Rd., White River Junction, VT 05001-9486 Phone: 802-296-2321 Fax: 802-296-2325 Email:
[email protected] www.conceptsnrec.com/Corporate/Contact-us.aspx Conco Systems, Inc., 530 Jones St., Verona, PA 15147 Phone: 412-828-1166 Fax: 412-826-8255 Email:
[email protected] www.concosystems.com Condenser & Chiller Services, Inc., 13488 Fifth St., Chino, CA 91710 Phone: 800-356-1932 Fax: 909-590-3446 Email:
[email protected] www.ccs-tubes.com Conforma Clad, Inc., 501 Park East Blvd., New A lbany, lbany, IN 47150 Phone: 812-948-2118 Fax: 812-944-3254 Email:
[email protected] www.conformaclad.com
72
ConocoPhillips, 600 N Dairy Ashford, Houston, TX 77079 Phone: 281-293-2929 Fax: 281-293-1915 Email:
[email protected] www.conocophillips.com/tech Conomos Industrial Services, Coulter & Station Streets, Bridgeville, PA 15017 Phone: 412-221-1800 Fax: 412-221-4641 Email:
[email protected] Construction Business Associates, LLC, 2310 Seven Lakes South, West End, NC 27376 Phone: 910-400-3113 Email:
[email protected] www.ConstrBiz.com Construction Techniques, Inc., 15887 Snow Rd., Ste. 100, Cleveland, OH 44142 Phone: 216-267-7310 Fax: 216-267-9310 Email:
[email protected] www.fabriform1.com Container, Container, d.o.o., Bezigrajska Cesta 6, Celje, 3000 Slovenia Phone: 00386 3 4263 200 Fax: 00386 3 4263 276 Email:
[email protected] www.container.si Contec Systems, 1566 Medical Dr., Ste. 310, Pottstown, PA 19464 Phone: 610-326-3235 x21 Fax: 610-326-3238 Email:
[email protected] [email protected] www.contecsystems.com Continental Control Systems, 3131 Indian Rd., Boulder, CO 80301 Phone: 303-444-7422 Fax: 303-444-2903 Email:
[email protected] www.ccontrolsys.com Control Plus, Inc., 257 N. West Ave. c/o Micronics Ultrasonic Flow, Elmhurst, IL 60126 Phone: 888-274-8803 Fax: 630-279-9026 Email:
[email protected] www.micronicsflowmeters.com Conval, Inc., 265 Field Rd., Somers, CT 06071 Phone: 860-763-3551 Fax: 860-763-3557 Email:
[email protected] www.Conval.com
Convault, Inc., 4109 E Zeering Rd., Denair, CA 95316 Phone: 209-632-7571 Fax: 209-632-4711 Email:
[email protected] www.convault.com
Cormetech, Inc., 5000 International Dr., Durham, NC 27712 Phone: 919-595-8721 Fax: 919-595-8701 Email:
[email protected] See our ad on p. 9
Conveyor Services/Classic Conveyor Components, 120 Airport Rd., Blairsville, PA 15717 Phone: 724-459-5261 Fax: 724-459-5605 Email: r_vachal@clas sicconveyor. sicconveyor. com www.classicconveyor.com
Cornerstone Material Handling, Inc., 258 Prospect St., St. George, ON N0E 1N0 Canada Phone: 519-448-3344 Fax: 519-448-4514 Email:
[email protected] www.cornerstonematerialhandling.com
Cooling Tower Consulting,, LLC, 541 Bauer Rd., Bath, PA 18014 Phone: 610-737-2778 Fax: 610-500-5082 Email:
[email protected] www.coolingtowerconsultingllc.com Cooling Tower Depot, Inc., 651 Corporate Cir., Ste. 206, Golden, CO 80401 Phone: 720-746-1234 Fax: 720-746-1110 Email: ds
[email protected] [email protected] Cooling Tower Technologies, Inc., 52410 Clark Rd., White Castle, LA 70788 Phone: 225-545-4144 Fax: 225-545-4151 Email:
[email protected] Cooper Power Systems, 505 Hwy. 169 North, Ste. 1200, Minneapolis, MN 55441 Phone: 763-595-7777 Fax: 763-543-7777 Email:
[email protected] www.cannontech.com Copes-Vulcan, An SPX Brand, 5602 West Rd., McKean, PA 16426 Phone: 814-476-5800 Fax: 814-476-5834 Email:
[email protected] www.copesvulcan.com CORIMPEX USA, Inc., 501 Main St., Ste. 208, Klamath Falls, OR 97601 Phone: 541-273-3030 Email:
[email protected] Coritech Services, 4716 Dele mere, Royal Oak, MI 48073 Phone: 248-563-7280 Email:
[email protected] www.coritech.com
www.powermag.com
Corrosion Control, Inc., 494 Fairplay St., Rutledge, GA 30663 Phone: 706-557-9624 Fax: 706-557-7923 Email: debbie@
[email protected] Corrosion Engineering, P.O. Box 5670, Mesa, AZ 85211 Phone: 480-890-0203 Fax: 480-890-0589 Email:
[email protected] www.corroeng.com Corrosion Monitoring Services, 902 Equity Dr., West Chicago, IL 60174 Phone: 630-762-9300 Fax: 630-762-9301 Email:
[email protected] www.cmsinc.us Corrosion Service Co. Europe Ltd., 59-60 Thames St., Windsor, Windsor, SL4 1TX United Kingdom Phone: +44 (0) 1753 272119 Fax: +44 (0) 1753 272120 Email: sales @corrosionservice. @corrosionservice. co.uk www.corrosionservice.co.uk Corrpro Companies, Inc., 1055 West Smith Rd., Medina, OH 44256 Phone: 330-723-5082 Fax: 330-722-7606 Email:
[email protected] www.corrpro.com Cortec Corp., 4119 White Bear Pkwy., St. Paul, MN 55110 Phone: 651-429-1100 Fax: 651-429-1122 Email:
[email protected] www.cortecvci.com Cosa Instrument Corp., Process Control Div, 84G Horseblock Rd., Yaphank, NY 11980 Phone: 631-345-3434 Email:
[email protected] www.cosa-instrument.com
|
POWER December 2013
CPV Manufacturing, 851 Preston St., Philadelphia, PA 19104-1598 Phone: 215-386-6508 Fax: 215-387-9043 Email:
[email protected] www.cpvmfg.com
Curran International, 4610 Vicksburg Ln., Dickinson, TX 77539 Phone: 281-339-9993 Fax: 281-339-9994 Email:
[email protected] www.curranintl.com
Dekker Vacuum Technologies, Technologies, Inc., 935 S Woodland Ave., Michigan City, IN 46360 Phone: 219-861-0661 Email:
[email protected] www.dekkervacuum.com
CRC Engineering, P.C., 1261 Broadway, Broadway, Ste. 608, New York, NY 10001 Phone: 212-889-1233 Fax: 212-889-1211 Email:
[email protected] www.crc-eng.com
Custom Expansion Joints, Inc., 313 N Stewart Rd., Li berty, MO 64068 Phone: 816-781-3507 Fax: 816-781-3520 Email:
[email protected] www.cej.com
Delta Instrument, LLC, 148 Veterans Dr., Northvale, NJ 07647 Phone: 201-768-7200 Fax: 201-768-5020 Email:
[email protected] www.DeltaInstrument.com
Croll-Reynolds Engineering Co., Inc., 2400 Reservoir Ave., Trumbull, CT 06611-4735 Phone: 203-371-1983 Fax: 203-371-0615 Email:
[email protected] www.croll-reynoldsengineering. com Cryogenic Institute of New England, Inc., 78 Chilmark St., Worcester, Worcester, MA 01604 Phone: 800-739-7949 Fax: 508-459-7426 Email:
[email protected] [email protected] www.nitrofreeze.com
Cutsforth Products, Inc., 37837 Rock Haven Rd., Cohasset, MN 55721 Phone: 218-326-8263 Fax: 218-327-1006 Email:
[email protected] See our ad on p. 53 CYME International T&D, 67 S Bedford St., Ste. 201 East, Burlington, MA 01803-5177 Phone: 781-229-0269 Fax: 781-229-2336 Email:
[email protected] www.cyme.com
D
Crystal Communication Ltd., Suite 1/B, House-7, Road-14/C, Sector-4, Uttara, Uttara, Dhaka, 1230 Bangladesh Fax: 88028953674 Email: solutionnsources@gmail. com www.crystalbgd.com
Daniels Manufacturing Corp., 526 Thorpe Rd., Orlando, FL 32824 Phone: 407-855-6161 Email:
[email protected] [email protected] www.dmctools.com
CSC, 3890 Lancaster D r, Doylestown, PA 18902 Phone: 267-247-6876 www.csc.com
Data Systems & Solutions, LLC, 12100 Sunset Hills Rd., Ste. 310, Reston, VA 20190 Phone: 703-889-1300 Fax: 703-889-1359 Email:
[email protected] www.ds-s.com
CTI Industries, Inc., 283 Indian River Rd., Orange, CT 06477 Phone: 203-795-0070 Fax: 203-795-7061 Email:
[email protected] CTI Power/Chicago Tube & Iron Co., 421 B rowns Hill Rd., P.O. Box 670, Oakboro, NC 28129 Phone: 704-781-2060 Fax: 704-781-2099 Email:
[email protected] [email protected] www.cti-power.com CU Services, LLC , 725 Parkview, Elk Grove, IL 60007 Phone: 847-439-2303 Fax: 847-439-3006 Email:
[email protected] www.cuservices.net
|
December 2013 POWER
Day & Zimmermann ECM, 1827 Freedom Rd., Ste. 101, Lancaster, PA 17601 Phone: 215-299-4924 Email:
[email protected] [email protected] www.dayzim.com DCM Clean-Air Products, Inc., 9605 Camp Bowie West Blvd., Fort Worth, TX 76116 Phone: 817-696-0044 Fax: 817-451-0615 Email:
[email protected] [email protected] Defitec (Filtration), Rue Michel Verbeck, 16, Waterloo, 1410 Belgium Phone: +32-2-354 06 10 Fax: +32-2-353 03 77 Email:
[email protected] www.defitec.com
Delta Mechcons India Ltd., 3rd Floor, Arcadian Bldg. No. 12 North Main Road, Koregaon Park, Pune, 411 001 India Phone: 020 66077999/970/933 Email:
[email protected] [email protected] www.delta-india.net Delta Power Services, 363 North Sam Houston Pkwy. E, #630, Houston, TX 77060 Phone: 281-405-6853 Fax: 281-405-6862 Email:
[email protected] www.deltapowerservices.com Delta/Unibus, Div. of Powell Electrical Systems, 515 Railroad Ave., Northlake, IL 60164 Phone: 708-409-1200 Fax: 708-409-1211 Email: toyya.garner@deltaunibus. com www.deltaunibus.com Design Analysis Services, 857 Bonnie Brae Ln., Bolingbrook, IL 60440 Phone: 630-783-0384 Email:
[email protected] www.design-analysis.com
Detroit Stoker Co., 1510 East First St., Monroe, MI 48161 Phone: 734-241-9500 Fax: 734-241-7126 Email: s
[email protected] [email protected] www.detroitstoker.com See our ad on p. 51 Dexter Innovative Solutions, LLC, 61 East River St., Orange, MA 01364 Phone: 978-544-2751 Fax: 978-544-8357 Email:
[email protected] www.dexter-is.com
www.powermag.com
DFT, Inc., P.O. Box 566, 140 Sheree Blvd., Exton, PA 19341 Phone: 610-363-8903 Email:
[email protected] www.dft-valves.com DGH Corp., P.O. Box 5638, Manchester, NH 03108 Phone: 603-622-0452 Fax: 603-622-0487 Email:
[email protected] www.dghcorp.com
C O M P A N Y D I R E C T O R Y
Diamond Power International, Inc., 2600 E Main St., Lancaster, OH 43130-0415 Phone: 800-848-5086 Fax: 740-687-4229 Email: dpi_marketing@diamon
[email protected] www.diamondpower.com DIS-TRAN High Voltage Specialists, 4725 Hwy. 28 E, Pineville, LA 71360 Phone: 318-448-0274 Fax: 318-487-8234 Email:
[email protected] [email protected] www.distran.com Distrigas GDF SUEZ, 20 City Square, Charlestown, MA 02129 Phone: 617-526-8300 www.suezenergyna.com See our ad on p. 11 DMC Power, 2846 Saddlebrook Way, Way, Marietta, GA 30064 Phone: 404-617-8794 Email: dschrampfer@dmcpower
[email protected] .com www.dmcpower.com Doble Engineering Co., 85 Walnut St., Watertown, MA 02472 Phone: 617-926-4900 Fax: 617-926-0528 Email:
[email protected] [email protected] www.doble.com Dollinger Filtration, an SPX Brand, 4647 SW 40th Ave., Ocala, FL 34474 Phone: 800-344-2611 Fax: 352-873-5773 Email:
[email protected]@dehydration.spx.com www.dollinger-spx.com
73
Y R O T C E R I D Y N A P M O C
Dongfang Electric Corp. / DSI, 4030 Moorpark Ave., Ste. 216, San Jose, CA 95117 Phone: 408-850-1416 Fax: 408-519-7091 Email:
[email protected] www.dongfang-usa.com Doosan Engineering & Services, LLC (A Burns & Roe - Doosan Projects Alliance), 5 Paragon Dr., Dr., Montvale, NJ 07645 Phone: 201-986-4252 Fax: 201-986-4869 Email:
[email protected] www.doosanheavy.com Dow Electrical & Telecommunications, Houston Dow Ce nter, nter, 1254 Enclave Pkwy., Houston, TX 77077 Phone: 800-441-4DOW www.dowinside.com
Ducon Technologies, A/4, Road No. 1, Wagle Estate, Thane West, 400604 India Email:
[email protected] www.ducon.com Ducon Technologies, Inc. - MIP Div., 19 Engineers Ln., Farmingdale, NY 11735 Phone: 631-694-1700 Fax: 631-420-4985 Email:
[email protected] www.mip.ducon.com
DragonWear, P.O. Box 28789, Seattle, WA 98118 Phone: 800-873-5725 Fax: 206-723-1890 Email:
[email protected] [email protected] www.truenorthgear.com
Dueco, Inc., Corporate Headquarters N4 W22610 Bluemound Rd., Waukesha, WI 53186 Phone: 262-547-8500 Fax: 262-547-8407 Email:
[email protected] www.dueco.com
DREHMO GmbH, Industrie Str. 1, Wenden, 57482 Germany Phone: 49 2762 612-311 Fax: 49 2762 612-359 Email:
[email protected] www.drehmo.com
Durag Group, Kollaustr. 105, Hamburg, 22453 Germany Phone: +49 40 554218-0 Fax: + 49 584154 Email:
[email protected] www.durag.de
Drennen Engineering, Inc., P.O. P.O. Box 937, Windsor, CT 06095 Phone: 860-219-2502 Email:
[email protected] www.asherosion.com
DuraSystems Barriers, Inc., 199 Courtland Ave., Vaughan, ON L4K 4T2 Canada Phone: 866-338-0988 Fax: 905-660-8887 Email: durasystems@durasystems. com www.durasystems.com
Dresser-Rand, 299 Lincoln St., Worcester, Worcester, MA 01605 Phone: 508-595-1700 Fax: 508-595-1780 Email:
[email protected] www.dresser-rand.com Dresser-Rand Co. Ltd., 85 Papyrus Rd., Peterborough, PE4 5HG United Kingdom Phone: +44 1733 292200 Fax: +44 1733 292300 Email:
[email protected] [email protected] www.dresser-rand.com Dresser-Rand, COPPUS Portable Ventilators, 299 Lincoln St., Worcester, Worcester, MA 01605 Phone: 508-595-1700 Fax: 508-595-1780 Email:
[email protected] [email protected] www.dresser-rand.com/products/ coppus
74
Dubai Electricity and Water Authority, P.O. Box 564, Dubai, 564 United Arab Emirates Phone: 97143072462 Fax: 97143248111 Email: dawood.jawahar@dewa. gov.ae www.dewa.gov.ae
Duromar, Duromar, Inc., 706 Washington St., Pembroke, MA 02359 Phone: 781-826-2525 Fax: 781-826-2150 Email:
[email protected] [email protected] www.duromar.com Dustex Corp., 100 Chastain Ctr Blvd., Ste. 195, Kennesaw, GA 30144 Phone: 770-429-5575 Fax: 770-429-5556 www.dustex.com DYLANGroup, Hermanus Boerhaavestrraat 1, P.O. Box 1208, Oud-Beijerla, 3260 AG Netherlands Phone: 31 (0)186 - 64 15 55 Fax: 31 (0)186 - 61 21 57 www.dylangroup.com
Dynamic Systems, Inc., 15331 NE 90th St., Redmond, WA 98052 Phone: 425-284-1662 Fax: 425-861-3978 Email:
[email protected] www.a-barcode.com
E E / SYSTEMS, 566 Mack Pl., St. Clair, MI 48080 Phone: 313-882-1133 Email:
[email protected] www.ENXEX.com E.A.R., I nc., P.O. P.O. Box 18888, Boulder, Boulder, CO 80308 Phone: 303-447-2619 Fax: 303-447-2637 Email:
[email protected] www.earinc.com E.D.I, Inc., 3415 Belmont Terrace Davie, Florida, FL 33328 Phone: 954-577-2225 Fax: 954-577-2227 Email:
[email protected] www.ediequipment.com E.H. Wachs, 600 Knightsbridge Pkwy., Lincolnshire, IL 60069 Phone: 847-537-8800 Fax: 847-520-1147 Email:
[email protected] www.ehwachs.com Eagle Eye Power Solutions, 4230 N Oakland Ave., #176, Milwaukee, WI 53211 Phone: 414-962-3377 Fax: 414-962-3660 Email:
[email protected] www.eepowersolutions.com Eagle Technology, Inc., 10500 N Port Washington Rd., Mequon, WI 53092 Phone: 262-241-3845 Fax: 262-241-5248 Email:
[email protected] www.eaglecmms.com Earth Energy Solutions Group, 4230 Cardinal Blvd., Ponce Inlet, FL 32127 Phone: 877-349-4820 Fax: 727-290-4048 Email:
[email protected] www.EarthEnergyGroup.com
www.powermag.com
EchoMail, Inc., 701 Concord Ave., Cambridge, MA 02138 Phone: 617-354-8585 Fax: 617-354-8899 Email: jessica.hanson@echomail. com www.echomail.com EcoSys, 800 Westchester Ave., Ste. 710, Rye Brook, NY 10573 Phone: 914-304-5000 Fax: 914-464-7320 Email:
[email protected] www.ecosys.net ECT, Inc., 401 E Fourth St., Bldg. 20, Bridgeport, PA 19405 Phone: 610-239-5120 Fax: 610-239-7863 Email:
[email protected] www.ectinc.net Ecutel Systems, 2300 Corporate Park Dr., Ste. 410, Herndon, VA 20171 Phone: 571-203-8300 Fax: 571-203-8310 Email:
[email protected] www.ecutel.com EDF Renewable Energy, 15445 Innovation Dr., San Diego, CA 92128 Phone: 888-903-6926 www.edf-re.com EdgenMurray, EdgenMurray, 18444 Highland Rd., Baton Rouge, LA 70808 Phone: 225-756-7886 Fax: 225-756-8995 Email:
[email protected] [email protected] www.edgenmurray.com Edwards Industrial Equipment Corp., 49 14th Ave. SW, St. Paul, MN 55112 Phone: 651-330-1738 Fax: 651-846-4597 Email:
[email protected] www.edwardsindustrialequipment.com Edwards Vacuum, Inc., Highwood Office Park, One Highwood D r., Ste. 101, Tewksbury, MA 01876 Phone: 800-848-9800 Fax: 866-484-5218 Email:
[email protected] www.edwardsvacuum.com EHC Field Se rvices, Inc., P.O. P.O. Box 43, Cedartown, GA 30125 Phone: 866-308-6299 Fax: 678-246-0470 Email:
[email protected] www.turbine-flushing-equipment. com
|
POWER December 2013
EITI - Electrical I ndustry Training Institute USA, Inc., 1465 Slater Rd., P.O. Box 5007, Ferndale, WA 98248-5007 Phone: 877-859-8228 Fax: 877-284-7916 Email:
[email protected] www.eiti.us EK Ekcessories, 575 West 3200 South, Logan, UT 84321 Phone: 435-753-8448 Fax: 435-753-2411 Email:
[email protected] www.ekusa.com Elecsys Corp., 846 N Martway Ct., Olathe, KS 66062 Phone: 913-982-5672 Email:
[email protected] www.elecsyscorp.com/scada/ director ElectraTherm, 4750 Turbo Circle, Reno, NV 89502 Phone: 775-398-4680 Fax: 775-398-4674 Email:
[email protected] www.electratherm.com ElectraWave, Inc., 1522 Yale Ave., Stockton, CA 95203 Phone: 209-467-4779 Email:
[email protected] www.electrawavesv.com Electro Industries/GaugeTech, Industries/GaugeTech, 1800 Shames Dr., Westbury, Westbury, NY 11590 Phone: 516-334-0870 Fax: 516-338-4741 Email:
[email protected] www.electroind.com Electrochemical Devices, Inc., P.O. Box 31, Albion, RI 02802 Phone: 617-484-9085 Fax: 617-484-3923 Email:
[email protected] www.edi-cp.com Electroputere S.A., DIEC, P.O Box 231085, New York, NY 10023 Phone: 212-629-6501 Fax: 212-629-6502 Email:
[email protected] Elgin Sweeper, 1300 W. Bartlett Road, Elgin, IL 60120 Phone: 847-741-5370 Fax: 847-742-3035 elginsweeper.com See our ad on p. 29
|
December 2013 POWER
Eliminator Slurry Pumps, 4432 Venture Ave., Duluth, MN 55811 Phone: 218-722-9904 Fax: 218-722-2826 Email:
[email protected] www.eliminatorpumps.com Ellison Consultants, 4966 Tall Oaks Dr., Monrovia, MD 217709316 Phone: 301-865-5302 Fax: 301-865-5591 Email:
[email protected] www.ellisoncon.com Ellison Surface Technologies, Technologies, 8093 Columbia Rd., Ste. 201, Mason, OH 45040 Phone: 513-770-4900 Fax: 513-770-4980 Email: edolby@ellisonsurfacetech. com www.ellisonsurfacetech.com Elma Electronic, 760 Veterans Circle, Warminster, PA 18974 Phone: 800-445-6194 Email: vale
[email protected] [email protected] www.elma.com Elos Fixturlaser AB, Box 7, Mölndal, SE-431 21 Sweden Phone: +46 31 706 28 00 Fax: +46 31 706 28 50 Email:
[email protected] www.fixturlaser.com Elsys Instruments, 234 Cromwell Hill Rd., Monroe, NY 10950 Phone: 845-238-3933 Fax: 845-782-6045 Email:
[email protected] www.elsys-instruments.com Emerson Process Management, Fisher, Fisher, 301 S 1st Ave., Marshalltown, IA 50158 Phone: 641-754-3011 Email:
[email protected] www.fisher.com Emerson Process Management, Power & Water Solutions, 200 Beta Dr., Pittsburgh, PA 15238 Phone: 412-963-4000 Fax: 412-963-3644 Email:
[email protected] www.emersonprocess-powerwater. com
Emerson Process Management, Rosemount Analytical, 6565-P Davis Industrial Pkwy., Solon, OH 44139 Phone: 440-914-1261 Fax: 440-914-1262 Email: gas.csc@emersonprocess. com www.raihome.com Emerson Process Management, Rosemount Div., 8200 Market Blvd., Chanhassen, MN 55438 Phone: 952-906-8888 Fax: 952-949-7001 Email:
[email protected] www.rosemount.com eMpasys, 309 Fellowship Rd., Mt Lurel, NJ 08504 Phone: 856-412-8056 Fax: 814-619-7880 Email:
[email protected] www.empasys.net EMS Industrial and Service, 10800 North Main St., Richmond, IL 60071 Phone: 815-678-2700 Fax: 815-678-3094 Email: jonathan@ems-industrial. com www.ems-industrial.com Emtrade International Ltd., Unit 3 Ram Blvd., Foxhills Industrial Estate S cunthorpe, Lincolnshire Lincolnshire,, DN15 8QW United Kingdom Phone: +44(0)1724851001 Fax: +44(0)1724851002 Email:
[email protected] [email protected] www.emtrade.co.uk Encore Dredging, Inc., P.O. Box 3069, Clarksville, IN 47131 Phone: 941-876-0559 Fax: 941-876-0560 Email:
[email protected] www.dredgingcompany.com Enerac, Inc., 67 Bond St., Westbury, NY 11590 Phone: 516-997-2100 Fax: 516-997-2129 Email:
[email protected] www.enerac.com Enercon Engineering, Inc., No 1 Altorfer Ln., East Peoria, IL 61611 Phone: 309-694-1418 Fax: 309-694-3703 www.enercon-eng.com
www.powermag.com
Energy and Process Corp., 2146-B Flintstone Dr., Tucker, GA 30085 Phone: 770-934-3101 Fax: 770-938-8903 Email:
[email protected]@energyandprocess.com www.energyandprocess.com Energy Associates, P.C., Montville Office Park, 150 River Rd., Ste. J4, Montville, NJ 07045 Phone: 973-331-8100 Email:
[email protected] www.Energy-PC.com
C O M P A N Y D I R E C T O R Y
Energy Concepts Co., 627 Ridgely Ave., Annapolis, MD 21401 Phone: 410-266-6521 Fax: 410-266-6539 Email:
[email protected] www.energy-concepts.com Energy Equipments & Products Co., No.9/203, Rubin, Premjyot Complex Ghatkopar - Mankhurd Link Road, Near Indian Oil Nagar, Mumbai, MA 400 043 India Email:
[email protected] [email protected] www.energy.epco.com Energy Products of Idaho, 3568 W Industrial Loop, Coeur d’Alene, d’Alene, ID 83815-6016 Phone: 208-765-1611 Fax: 208-765-0503 Email:
[email protected] [email protected] www.energyproducts.com Energy Providers Coalition for Education (EPCE), 6021 S Syracuse Way, Ste. #213, Greenwood Village, CO 80111 Phone: 303-804-4673 Email:
[email protected] www.epceonline.org Energy Storage and Power, 520 US Hwy. 22 E, Ste. 205, Bridgewater, NJ 08807 Phone: 908-393-0526 Email:
[email protected] www.caespower.com Enerscan Engineering, Inc., 22 Julies Walk, Halifax, NS B3M 2Z7 Canada Phone: 902-445-4433 Fax: 902-457-3283 Email:
[email protected] www.enerscanengineering.com Enertech, a Business Unit of Curtiss-Wright Flow Control Co., 2950 Birch St., Brea, CA 92821 Phone: 714-528-2301 Email:
[email protected] www.enertech.cwfc.com
75
Y R O T C E R I D Y N A P M O C
Engineering Consultants Group, Inc., 1236 Weathervane Ln., Ste. 200, Akron, OH 44313 Phone: 330-869-9949 Fax: 330-869-9995 Email:
[email protected] www.ecg-inc.com
Entech Design, Inc., 315 S Locust, Denton, TX 76201 Phone: 940-898-1173 Fax: 940-382-3242 Email: rminnis@entechdesign. com www.entechdesign.com
Engineering Software, P.O. Box 1180, Germantown, MD 20875 Phone: 301-540-3605 Fax: 301-540-3605 Email: in
[email protected] [email protected] www.engineering-4e.com
ENV Environmental, 1466 Ripchak Rd., Corona, CA 92879 Phone: 909-739-0738 Fax: 909-739-0738 Email: richard_booth@sbcglobal. net www.enverr.com
Engineers India Ltd., EIB 4th Floor, Cost Engg Department, 1 Bhikaji cama Place, R.K.Puram, New Delhi, 110066 India Phone: 9540066619 Email: ni shendra_mishra@
[email protected] Enidine, Inc., 7 Centre Dr., Orchard Park, NY 14127 Phone: 716-662-1900 Fax: 716-662-1909 Email:
[email protected] www.enidine.com
Environment One Corp., 2773 Balltown Rd., Niskayuna, NY 12309 Phone: 518-346-6161 Fax: 518-346-6188 Email:
[email protected] www.eone.com EPG - Enginuity Portable Grid, 2500 State Hw y. 160, Warrior, Warrior, AL 35180 Phone: 205-647-4279 Fax: 205-590-3885 Email:
[email protected] www.EPGinc.us
ENMET Corp., P.O. Box 979, 680 Fairfield Ct., Ann Arbor, MI 48106 Phone: 734-761-1270 Fax: 734-761-3220 Email:
[email protected] www.enmet.com
epro GmbH, Joebkesweg 3, Gronau, D-48599 Germany Phone: 49 2562 709-460 Email: alexa.tenbrink@emerson. com www.epro.de
ENOSERV, ENOSERV, LLC, 5630 S Memorial, Tulsa, OK 74145 Phone: 918-622-4530 Fax: 918-622-6569 Email:
[email protected] [email protected] www.enoserv.com
Equipment Maintenance Services, Inc., 2412 West Durango St., Phoenix, AZ 85009 Phone: 602-258-8545 Email:
[email protected] www.wmsusa.com
ENOTEC, Inc., 6206 Sandy Ridge Circle NW, North Canton, OH 44720-6686 Phone: 330-498-0202 Fax: 330-497-9802 Email:
[email protected]. com www.enotec.com
Eren Energy Power Plant, Eren Enerji Elektrik Uretim A.S. Catalagzi, Zonguldak, TX 67300 Turkey Email: hilmi.unal@erenholding. com.tr www.erenholding.com.tr
eNPure Process Systems, Inc., 54 Ingleside Ave., Cranston, RI 02905 Phone: 617-823-0860 Fax: 401-447-3976 Email:
[email protected] www.enpureinc.com
Ergonomic Office Chairs by United Group, Inc., 13700 Polo Trail Dr., Dr., Lake Forest, IL 60045 Phone: 847-816-7100 Fax: 847-816-7102 Email:
[email protected] www.eocUSA.com Erickson Air-Crane, Inc., 3100 Willow Springs Rd., P.O. Box 3247, Central Point, OR 97502 Phone: 541-664-5544 Fax: 541-664-9469 Email:
[email protected] www.ericksonaircrane.com
76
ERICO International Corp., 34600 Solon Rd., Solon, OH 44139 Phone: 800-677-9089 www.erico.com Ernst Flow Industries, 116 Main St., Farmingdale, NJ 07727-1495 Phone: 732-938-5641 Fax: 732-938-9463 Email:
[email protected] [email protected] www.ernstflow.com ESAB Welding & C utting Products, 411 S Ebenezer Rd., Florence, SC 29501 Phone: 843-669-4411 Email:
[email protected] www.esabna.com ESI, Inc. of Tennessee, 1250 Roberts Blvd., Kennesaw, GA 30144 Phone: 770-427-6200 Fax: 770-425-3660 Email:
[email protected] www.esitenn.com ESP/Energy Systems Products, Inc., 6830 N E ldridge ldridge Pkwy., #506, Houston, TX 77041 Phone: 713-937-6336 Fax: 713-937-6378 Email:
[email protected] [email protected] www.espforenergy.com E-Tech, Inc., 20701 E 81st St., Ste. 3, Broken Arrow, OK 74014 Phone: 918-665-1930 Fax: 918-665-1935 Email:
[email protected] www.e-techinc.com EtherWAN Systems, 4570 E Eisenhower Circle, Anaheim, CA 92807 Phone: 714-779-3800 Fax: 714-779-3806 Email:
[email protected] www.etherwan.com Eutech Scientific Engineering, Dennewartstraße 25-27, Aachen, 52068 Germany Phone: 49-241-963-2380 Fax: 49-241-963-2389 Email:
[email protected] www.eutech-scientific.de Eutectic Corp., N94 W14355 Garwin Mace D r., Menomonee Menomonee Falls, WI 53051 Phone: 262-532-4677 Fax: 262-255-5542 Email:
[email protected] [email protected] www.eutecticusa.com
www.powermag.com
Everlasting Valve Co., 108 Somogyi Ct., South Plainfield, NJ 07080 Phone: 908-769-0700 Fax: 908-769-8697 Email:
[email protected] www.everlastingvalveusa.com Exact Metrology, P.O. Box 7536, Algonquin, IL 60108 Phone: 630-258-2656 Email:
[email protected] www.exactmetrology,com Exlar Corp., 18400 West 77th St., Chanhassen, MN 55317 Phone: 952-500-6200 Email:
[email protected] [email protected] www.exlar.com Exponential Engineering Co., 328 Airpark Dr., Fort Collins, CO 80524 Phone: 970-207-9648 Fax: 970-207-9657 Email:
[email protected] www.exponentialengineering.com Express Integrated Technologies, Technologies, LLC, 1640 South 101st East Ave., Tulsa, OK 74128 Phone: 918-622-1420 Fax: 918-622-1457 Email:
[email protected] www.ExpressTechTulsa.com Expro Services, Inc., 501 Scott St., Worthington, KY 41183 Phone: 606-834-9402 Email:
[email protected] [email protected] www.explosiveprofessionals.com ExxonMobil Lubricants & Petroleum Specialties (Mobil Industrial Lubricants), 3225 Gallows Rd., Room 6C0631, Fairfax, VA 22031 Phone: 703-846-1998 Fax: 703-846-3041 Email: mi
[email protected]@exxonmobil.com www.mobilindustrial.com
E-ZLIFT Portable Conveyors, 2000 S Cherokee St., Denver, CO 80223 Phone: 800-821-9966 Fax: 303-733-5642 Email:
[email protected] www.ezliftconveyors.com
|
POWER December 2013
F F.E. Moran Special Hazard Systems, 2265 Carlson Dr., Northbrook, IL 60062 Phone: 847-498-4800 Email: femoranshsinfo@femoran. femoranshsinfo@femoran. com www.femoranshs.com Faber Burner Co., 1000 East Bald Eagle St., Lock Haven, PA 17745 Phone: 570-748-4009 Fax: 570-748-4324 Email:
[email protected] [email protected] www.faberburner.com Fabreeka International, Inc., 1023 Turnpike St., P.O. Box 210, Stoughton, MA 02072 Phone: 781-341-3655 Fax: 781-341-3983 Email:
[email protected] www.fabreeka.com Factory Sales & Engineering, Inc., 74378 Hwy. 25, Covington, LA 70435 Phone: 985-867-9150 Email:
[email protected] www.fsela.com Fairbanks Morse Pump, Pentair Water, Water, 3601 Fairbanks Ave., Kansas City, KS 66106 Phone: 913-371-5000 Fax: 913-748-4025 Email:
[email protected] www.fmpump.com FAIST Anlagenbau GmbH, Am Mühlberg 5 Niederraunau, Krumbach (Schwaben), 86381 Germany Phone: +49 8282 8880-0 Fax: +49 8282 8880-88 Email:
[email protected] www.faist.de FARO, FARO, 125 Technology Park, Lake Mary, FL 32746 Phone: 800-736-0234 Fax: 407-333-4181 Email:
[email protected] www.faro.com FCI-Fluid Components International, 1755 La Costa Meadows Dr., Dr., San Marcos, CA 92078-5115 Phone: 760-744-6950 Fax: 760-736-6250 Email: fcimarcom@
[email protected] www.fluidcomponents.com
|
December 2013 POWER
Fenner Dunlop Americas, 21 Laredo Dr., Scottdale, GA 30079 Phone: 404-297-3115 Fax: 404-296-5165 Email: jill.schultz@fennerdunlop jill.schultz@fennerdunlop.. com
Fisher Tank Co., 3131 West 4th St., Chester, PA 19013 Phone: 610-494-7200 Fax: 610-485-0157 Email:
[email protected] www.FisherTank.com
Flowrox Oy, Oy, Marssitie 1, Lappeenranta, 53600 Finland Phone: +358 201 113 311 Fax: +358 201 113 300 Email:
[email protected] www.flowrox.com
Fern Engineering, 55 Portside Portside Dr., P.O. Box 3380, Pocasset, MA 02559 Phone: 508-563-7181 Fax: 508-564-4851 Email:
[email protected] www.fernengineering.com
FlaktWoods, 1110 Main Place Tower, Tower, Buffalo, NY 14202 Phone: 716-845-0500 Fax: 716-845-5055 Email:
[email protected] www.flaktwoods.com
Flowrox, Inc., 808 Barkwood Ct., Ste. N, Linthicum, MD 21090 Phone: 410-636-2250 Email:
[email protected] [email protected] www.flowrox.us
Fibergrate Composite Structures, 5151 Beltline Rd., Ste. 700, Dallas, TX 75254 Phone: 972-250-1633 Fax: 972250-1530 Email:
[email protected] [email protected] www.fibergrate.com
Flexco, 2525 Wisconsin Ave., Downers Grove, IL 60543 Phone: 800-541-8028 Fax: 800-225-4833 Email:
[email protected] www.flexco.com
Field Works, Inc., 1220 Armstrong St., Algonquin, IL 60102 Phone: 847-658-8200 Fax: 847-658-4300 Email:
[email protected] www.fieldworksinc.com FilterSense, 800 Cummings Ctr, 357W, Beverly, MA 01915 Phone: 978-927-4304 Fax: 978-927-4329 Email:
[email protected] www.filtersense.com Filtration & Membrane Technology, Inc., 8342 Silvan Wind, Houston, TX 77040 Phone: 713-870-1120 Fax: 713-422-2533 Email:
[email protected] www.fmt-houston.com Filtration Advantage, 178 Lily St., San Francisco, CA 94102 Phone: 415-255-8484 Fax: 415-255-8484 Email:
[email protected] www.filtrationadvantage.com Fine Tubes Ltd., Plymbridge Rd. Estover, Plymouth, PL6 7LG United Kingdom Phone: +44 (0) 1752 697216 Fax: +44 (0) 1752 733301 Email:
[email protected] www.finetubes.com Fireaway, Inc., 5852 Baker Rd., Minnetonka, MN 55345 Phone: 952-935-9745 Fax: 952-935-9757 Email:
[email protected] www.statx.com
Flexco Engineered Systems Group, 401 Remington Blvd., Ste. A, Bolingbrook, IL 60440 Phone: 815-609-7025 Email:
[email protected] [email protected] www.flexcoengineeredsystems.com FLEX-CORE, 4970 Scioto Darby Rd, Hilliard, OH 43026 Phone: 614-889-6152 Fax: 614-876-8538 Email:
[email protected] www.flex-core.com Flexim Americas Corp., 250-V Executive Dr., Edgewood, NY 11717 Phone: 631-492-2300 Fax: 631-492-2117 Email:
[email protected] www.flexim.com Flexware, 364 Wheatridge Drive, Jeannette, PA 15644 Phone: 724-527-3911 Fax: 724-527-5701 www.flexwareinc.com Flight Systems Industrial Products, Products, 1015 Harrisburg Pike, Carlisle, PA 17013 Phone: 717-254-3747 Fax: 717-254-3778 Email:
[email protected] www.fsip.biz FlowMeters.com, 1755 E Nine Mile Rd., P.O. Box 249, Hazel Park, MI 48030 Phone: 248-542-9635 Fax: 248-398-4274 Email:
[email protected] www.flowmeters.com
www.powermag.com
C O M P A N Y D I R E C T O R Y
Flowserve, 1900 S Saunders St., Raleigh, NC 27603 Phone: 919-831-3200 Fax: 919-831-3369 Email:
[email protected] [email protected] www.Flowserve.com Flow-Tek Inc., A subsidiary of Bray International, Inc., 8323 N Eldridge Pkwy., Pkwy., #100, Houston, TX 77041 Phone: 832-912-2300 Fax: 832-912-2301 Email:
[email protected] www.flow-tek.com FLSmidth, Inc., 2040 Ave. C, Bethlehem, PA 18017 Phone: 610-264-6800 Fax: 610-264-6307 Email:
[email protected] www.flsmidth.com Fluke Corp., P.O. P.O. Box 9090, Everett, WA 98206-9090 Phone: 800-443-5853 Fax: 425-446-5116 Email:
[email protected] [email protected] www.fluke.com Fluor Enterprises, Inc., 100 Fluor Daniel Dr., Greenville, SC 296072770 Phone: 864-281-4400 Fax: 864-517-1290 Email: jody.teykl@fluor
[email protected] .com www.fluor.com FMC Technologies, Inc., P.O. Box 904, 400 Highpoint Dr., Chalfont, PA 18914 Phone: 215-822-4300 Fax: 215-996-4513 Email:
[email protected] www.fmctechnologies.com
77
Y R O T C E R I D Y N A P M O C
Forney Corp., 3405 Wiley Post Rd., Carrollton, TX 75006 Phone: 972-458-6100 Fax: 972-458-6195 Email:
[email protected] www.forneycorp.com Fortescue Metals Group Ltd, Level 2, 87 Adelaide Terrace, East Perth WA 6004, Australia Phone: +61 8 6218 8888 Fax: +61 8 6218 8880 Email:
[email protected] www.fmgl.com.au Foster Wheeler Ltd., Foster Wheeler North America Corp., Perryville Corp Park, P.O. Box 4000, Clinton, NJ 08809-4000 Phone: 908-730-4000 Fax: 908-730-5310 Email: powe
[email protected] [email protected] www.fwc.com Fox Venturi Eductors, 85 Franklin Rd., Dover, NJ 07801 Phone: 973-328-1011 Fax: 973-328-3651 Email:
[email protected] www.foxvalve.com FP Turbomachinery, Wiesenstrasse 57, Emmendingen, 79312 Germany Phone: +49 (0)7641-55346 Fax: +49 (0)7641-55319 Email:
[email protected] www.fpturbo.com Frederick Cowan & Co., Inc., 48 Kroemer Ave., Riverhead, NY 11901 Phone: 631-369-0360 Fax: 631-369-0637 Email:
[email protected] www.fcowan.com FreeWave Technologies, Inc., 1880 S Flatiron Ct., Ste. F, Boulder, CO 80301 Phone: 303-381-9276 Fax: 303-786-8393 Email:
[email protected] FrenchCreek Production, Inc., 626 13th St., Franklin, PA 16323 Phone: 814-437-1808 Fax: 814-437-2544 Email:
[email protected] [email protected] www.frenchcreekproduction.com
Freudenberg Filtration Technologies SE & Co. KG, Hoehnerweg 2-4, Weinheim, 69465 Germany Phone: +49 6201 80-6264 Fax: +49 6201 88-6299 Email: viledon@
[email protected] www.freudenberg-filter.com Frontier Industrial Corp, 26 Mississippi Street, Ste. 400, Buffalo, NY 14203 Phone: 716-447-7587 Fax: 716-447-7593 Email: rzuchlewski@fic-services. com www.fic-services.com FSE Energy, 74378 Highway 25, Covington, LA 70435 Phone: 985-867-9150 Fax: 985-867-9155 www.fseenergy.com See our ad on p. 12 Fuel Purification, 1208 W Marshall St., Richmond, VA VA 23220 Phone: 804-512-9320 Fax: 804-358-4200 Email:
[email protected] www.fuelpurification.com
Fuel Tech, Inc., 27601 Bella Vista Pkwy., Warrenville, IL 60555 Phone: 800-666-9688 Fax: 630-845-4501 Email:
[email protected] www.ftek.com Furnace Mineral Products, Inc., 7065 Tranmere Dr., Dr., Unit 6, Mississauga, ON L5S 1M2 Canada Phone: 905-676-1969 Fax: 866-591-9018 Email: aliberatore@fmpcoatings. com www.fmpcoatings.com Fusion Babbitting Co., Inc., 4540 W Burnham St., Milwaukee, WI 53219 Phone: 800-613-5118 Fax: 414-645-6606 Email:
[email protected] www.fusionbabbitting.com
Frenzelit North America, 4165 Old Salisbury Rd., Lexington, NC 27295 Phone: 336-956-3956 Fax: 336-956-3913 Email:
[email protected] www.frenzelit.net
78
G GAI Consultants, Inc., 385 East Waterfront Dr., Homestead, PA 15120-5005 Phone: 412-476-2000 Email: r.houston@gaiconsultants. r.houston@gaiconsultants. com www.gaiconsultants.com Galco Industrial Electronics, 26010 Pinehurst, Madison Heights, MI 48071 Phone: 248-542-9090 Fax: 248-414-5974 Email:
[email protected] www.galco.com Gantrex, Inc., 2000 Oxford Dr., Ste. 400, Bethel Park, PA 15102 Phone: 800-242-6873 Fax: 412-655-3814 Email:
[email protected] [email protected] om www.Gantrex.com Gardner Denver, 1800 Gardner Expwy, Quincy, IL 62305 Phone: 217-222-5400 Fax: 217-228-8243 Email:
[email protected] www.gardnerdenver.com Garlock Sealing Technologies, 1666 Division St., Palmyra, NY 14522 Phone: 315-597-4811 Fax: 315-597-3039 Email:
[email protected] www.garlock.com Gas Corporation of America, P.O. Box 5183, Wichita Falls, TX 76307 Phone: 940-723-6015 Email:
[email protected] www.gas-corp.com Gas Depot S.A., Boulevard Vista Hermosa 23-89 Zona15, Guatemala, 1015 Guatemala Phone: 50223695676 Fax: 50223658110 Email:
[email protected] Gas Turbine Efficiency, 300 Sunport Ln., Orlando, FL 32809 Phone: 407-304-5200 Fax: 407-304-5201 Email:
[email protected] [email protected] www.gtefficiency.com Gastops Ltd., 1011 Polytek St., Ottawa, ON K1J 9J3 Canada Phone: 613-744-3530 Fax: 613-744-8846 Email:
[email protected] www.gastops.com
www.powermag.com
GC3 Specialty Chemicals, Inc., 733 Heights Blvd., Houston, TX 77007 Phone: 713-802-1761 Fax: 713-869-0680 Email:
[email protected] www.gc3.com GE Energy, 8800 East 63rd St., Raytown, MO 64113-4801 Phone: 816-356-8400 Email:
[email protected] www.GE-energy.com/filtration GE Inspection Technologies, Technologies, 721 Visions Dr., Skaneateles, NY 13152 Phone: 888-332-3848 Fax: 866-899-4184 Email:
[email protected] www.geinspectiontechnologies.com GE Water & Process Technologies, 4636 Somerton Road, Trevose, PA 19053 Phone: 215-355-3300 www.gewater.com GEA Heat Exchangers - Cooling Tower Solutions Division, 17755 US Hwy. 19 North, Ste. 250, Clearwater, FL 33764 Phone: 727-530-9000 Fax: 727-530-9006 Email: coolingtowers.hx.us@ gea.com www.gea-heatexchangers.com/ products/wet-cooling-towers GEA Process Engineering, 9165 Rumsey Rd., Columbia, MD 21045 Phone: 410-997-8700 Fax: 410-997-5021 Email:
[email protected] www.niroinc.com Gearhart McKee, Inc., 47 Walnut St., Johnstown, PA 15901 Phone: 814-532-8870 Fax: 814-532-8875 Email:
[email protected] www.gearhartmckeeinc.com General Equipment Co., 620 Alexander Dr. SW, SW, Owatonna, MN 55060 Phone: 507-451-5510 Fax: 507-451-5511 Email:
[email protected] www.generalequip.com General Monitors, 26776 Simpatica Circle, Lake Forest, CA 92630 Email:
[email protected] www.generalmonitors.com
|
POWER December 2013
Genesis Lamp Corp., 375 N St. Clair St., Painesville, OH 44077 Phone: 800-685-5267 Fax: 440-354-0624 Email:
[email protected] [email protected] www.genesislamp.com Geometrica, Inc., 12300 Dundee Ct, Suite 200, Cypress, TX 77429 Phone: 832-220-1200 www.geometrica.com Georg Fischer, 2882 Dow Ave., Tustin, CA 92780 Phone: 714-731-8800 Email:
[email protected] www.us.piping.georgefischer.com Georg Fischer Piping Systems Ltd., Ebnatstrasse 111, Schaffhausen, 8201 Switzerland Phone: 0041 52 631 3909 Email: sanjay.patel@georgfischer. com www.piping.georgfischer.com George H. Bodman, Inc., P.O. Box 5758, Kingwood, TX 77325-4225 Phone: 281-359-4006 Fax: 281-359-4225 Email:
[email protected] [email protected] www.boilercleaningdoctor.com Geospatial Corp., 229 Howes Run Rd., Sarver, PA 16055 Phone: 724-353-3400 Email: info@
[email protected] www.geospatialcorporation.com GEOTEK, Inc./PUPI Crossarms, 1421 2nd Ave. NW, Stewartville, MN 55976 Phone: 507-533-6076 Fax: 507-533-4784 Email:
[email protected] [email protected] www.geotekinc.com Gestra AG, Muenchener Strasse 77, Bremen, 28215 Germany Phone: 0049 421 35030 Fax: 0049 421 3503397 Email:
[email protected] www.gestra.de GETAC, Inc., 20762 Linear Ln., Lake Forest, CA 92630 Phone: 866-464-3822 Fax: 949-699-1440 Email:
[email protected] www.getac.com Gilbert Electrical Systems & Products, P.O. Box 1141, Beckley, WV 25801 Phone: 304-252-6243 Fax: 304-252-6292 www.gilbertelectrical.com
|
December 2013 POWER
Gill Manufacturing Ltd., 9 Kenview Blvd., Brampton, ON L6T 5G5 Canada Phone: 905-792-0999 Fax: 905-792-0091 Email:
[email protected] www.gillmanufacturing.com GIW Industries, Inc., 5000 Wrightsboro Wrightsboro Rd., Grovetown, GA 30813 Phone: 706-863-1011 Fax: 706-863-5637 Email: marketing@giwindustries. com www.giwindustries.com GKS Inspection Services & Laser Design, 9401 James Ave., #132, Bloomington, MN 55112 Phone: 952-884-9648 Fax: 952-884-9653 Email:
[email protected] www.gks.com/ppc_lps_gks/terrestrial_new.asp Global Industrial Solutions, 219 Glider Circle, Corona, CA 92880 Phone: 951-279-9429 Fax: 951-279-6706 Email: info@
[email protected] www.globalindustrialsolutions.net Global Power Supply, 5383 Hollister Ave., Ste. 220, Santa Barbara, CA 93111 Phone: 805-683-3828 Fax: 805-683-3823 Email:
[email protected] www.globalpwr.net Global Training Solutions, Inc., P.O. Box 26067, 3163 Winston Churchill Blvd., Mississauga, ON L5L 5W7 Canada Phone: 416-806-5777 Email: info@
[email protected] www.globaltrainingsolutions.ca Gorman-Rupp Co., 305 Bowman St., P.O. Box 1217, Mansfield, OH 44903 Phone: 419-755-1011 Fax: 419-755-1251 Email:
[email protected] [email protected] www.GRpumps.com GP Strategies Corp., Energy Services Group, 25 Northpointe Pkwy., Amherst, NY 14228 Phone: 716-799-1080 Fax: 716-799-1081 Email: performance@gpstrategies performance@gpstrategies.. com www.gpstrategies.com
Graham Corp., 20 Florence Ave., Batavia, NY 14020 Phone: 585-343-2216 Fax: 585-343-1097 Email:
[email protected] www.graham-mfg.com
GTI, Box 1269, 2 Central Ave., Madison, NJ 07940 Phone: 973-360-0170 Fax: 973-360-0176 Email:
[email protected] [email protected] www.gti-e.com
Graphite Metallizing Corp., Graphalloy Division, 1050 Nepperhan Ave., Yonkers, NY 10703 Phone: 914-968-8400 Fax: 914-968-8468 Email:
[email protected] www.graphalloy.com
GulfRim Navigation, P.O. Box 1214, Abbeville, LA 70511 Phone: 877-893-0789 Fax: 337-893-6256 Email:
[email protected] www.gulfrim.com
Great Northern Products, P.O. Box 750, Exeter, NH 03833 Email:
[email protected] www.gnpinc.com Greencisco Industrial Co. Ltd., Cuiyuan Bldg., Songgyuan New Village, Hengkeng Industrial Area, Liaobu, Dongguan HI 523413 China Email:
[email protected] [email protected] www.greencisco.com
H H&L Instruments, P.O. Box 580, 34 Post Rd., North Hampton, NH 03862-0580 Phone: 603-964-1818 Fax: 603-964-8881 Email:
[email protected] www.hlinstruments.com H2O Innovation USA, Inc., 6840 Shingle Creek Pkwy., Ste. 20, Brooklyn Center, MN 55430 Phone: 763-566-8961 Fax: 763-566-8972 Email:
[email protected] www.h2oinnovation.com
Greens Power Equipment USA, Inc., 601 Carlson Pkwy., Ste. 1050, Minnetonka, MN 55305 Phone: 952-475-6333 Fax: 952-449-5101 Email:
[email protected] www.greenspower.us
Haberberger, Inc., 9744 Pauline Pl., Saint Louis, MO 63116 Phone: 314-631-3324 Fax: 314-631-2751 Email:
[email protected] [email protected] www.haberbergerinc.com
Gremp Steel Co., 14100 S Western Ave., Posen, IL 60469 Phone: 708-489-1000 Email:
[email protected] [email protected] www.grempsteel.com
Hach, P.O. Box 389, Loveland, CO 80539 Phone: 866-450-4248 Fax: 970-669-2932 Email:
[email protected] www.hach.com
GSE Consulting, LP, 808 Travis St., Ste. 802, Houston, TX 77002 Phone: 713-395-1990 ext 209 Fax: 713-395-1995 Email: andrewb@gulfstatesener andrewb@gulfstatesenergy. gy. com www.gseconsultinglp.com GSE Systems, Inc., 1332 Londontown Blvd., Ste. 200, Sykesville, MD 21784 Phone: 410-970-7800 Fax: 410-970-7995 Email:
[email protected] www.gses.com GSI - Generator Services Int, Inc., 1865 Scott Futrell Dr., Charlotte, NC 28208 Phone: 704-399-5422 Fax: 704-399-5983 Email:
[email protected] [email protected] www.gsionsite.com
www.powermag.com
C O M P A N Y D I R E C T O R Y
Hadek Protective Systems, Foster Plaza 5, 651 Holiday Dr., Pittsburgh, PA 15220 Phone: 412-204-0028 Fax: 412-204-0039 Email:
[email protected] [email protected] www.hadek.com Haefely Test AG, Birsstrasse 300, Basel, 4052 Switzerland Phone: +41 61 373 4111 Fax: +41 61 373 49 12 Email:
[email protected] www.haefely.com
79
Y R O T C E R I D Y N A P M O C
Haldor Topsoe, Topsoe, Inc., 17629 El Camino Real, Ste. 300, Houston, TX 77058 Phone: 281-228-5000 Fax: 281-228-5109 Email:
[email protected] www.topsoe.com
Hawk Measurement, 7 River St., Middleton, MA 01949 Phone: 978-304-3000 Fax: 978-304-1462 Email: gina.travers@hawkmeasure. gina.travers@hawkmeasure. com www.hawkmeasure.com
Halfen GmbH, Liebigstrasse 14, Langenfeld, 40764 Germany Phone: +49 (0) 2173/970-0 Fax: +49 (0) 2173/970-123 Email:
[email protected] www.halfen.com
Hayden Laser Services, LLC, 333 River St., West Springfield, MA 01089 Phone: 413-734-4981 Fax: 413-785-5052 Email:
[email protected] www.haydenlaser.com
Halfen USA, Inc., 8521 FM 1976, P.O. Box 547, Converse, TX 78109 Phone: 800-423-9140 Fax: 888-277-1695 Email:
[email protected] www.halfenusa.com Hamon Custodis, Inc., 58 East Main St., Somerville, NJ 08876 Phone: 908-333-2000 Fax: 908-333-2151 Email:
[email protected] www.hamoncustodis.com Hanover Technical Sales, Inc., P.O. Box 70, Battery Park, VA 23304 Phone: 757-357-2677 Email:
[email protected] www.HanoverTechnical.com HARCO, 186 Cedar Street, Branford, CT 06405-6011 Phone: 203-483-3700 www.harcolabs.com Hardy Process Solutions, 9440 Carroll Park Dr., Ste. 150, San Diego, CA 92121 Phone: 800-821-5831 Email: hardyinfo@hardysolutions. hardyinfo@hardysolutions. com www.hardysolutions.com Harrington Hoists, Inc., 401 West End Ave., Manheim, PA 17545 Phone: 800-233-3010 Fax: 717-665-2861 Email:
[email protected] www.harringtonhoists.com Hatch, 330 Hatch Drive, Foster City, CA 94404 Phone: 858-847-0655 Fax: 866-388-8595 www.hgpauction.com
80
Hayward Tyler, Tyler, 1 Kimpton Rd., Luton, LU1 3LD United Ki ngdom Phone: 01582 731144 Fax: 01582 722920 Email: marketing@haywardtyler marketing@haywardtyler.. com www.haywardtyler.com HC Controls, Inc., 3271 Pleasant Ter., Crestview, FL 32539 Phone: 850-398-8078 Fax: 850-398-4030 Email:
[email protected] www.hccontrols.com Headwaters, Inc., 10653 S River Front Pkwy., Ste. 300, South Jordan, UT 84095 Phone: 801-984-9400 Fax: 801-984-9410 Email:
[email protected] www.flyash.com Heath Consultants, Inc., 9030 Monroe Rd., Houston, TX 77061 Phone: 713-844-1300 Fax: 713-844-1309 Email: customerservice@heathus. com www.heathus.com Heatrex, Inc., P.O. P.O. Box 515, Meadville, PA 16335 Phone: 814-724-1800 Fax: 814-333-6580 Email:
[email protected] www.heatrex.com Helmick Corp., P.O. Box 71, Fairmont, WV 26555-0071 Phone: 304-366-3520 Fax: 304-366-8923 Email:
[email protected] www.HelmickCorp.com Hessler Associates, Inc., 3862 Clifton Manor Pl., Haymarket, VA 20169 Phone: 703-753-1602 Email:
[email protected] www.hesslernoise.com
Heyl & Patterson, Inc., P.O. P.O. Box 36, Pittsburgh, PA 15230 Phone: 412-788-9810 Fax: 412-788-9822 Email:
[email protected] www.heylpatterson.com HFP Acoustical Consultants, 6001 Savoy Drive, Suite 215, Houston, Texas 77036-3322 Phone: 713-789-9400 Fax: 713-789-5493 www.hfpacoustical.com HGP, HGP, Inc., 1720 N Pleasantburg Dr., Greenville, SC 29609 Phone: 864-370-0213 Fax: 864-370-0215 Email:
[email protected] www.hgp-inc.com Highland Technology, Technology, Inc., I nc., 18 Otis St., San Francisco, CA 94103 Phone: 415-551-1700 Fax: 415-551-5129 Email: info@highlandtechnology info@highlandtechnology.. com www.highlandtechnology.com Highline Products, 800 South St., Waltham, MA 02453 Phone: 781-736-0002 Fax: 781-647-3607 Email:
[email protected] www.highlineproducts.com Highpoint Sales, Inc., 21151 John Milless D r., P.O. P.O. Box 483, Rogers, MN 55374 Phone: 763-416-9707 Fax: 763-416-9708 Email:
[email protected] www.highpointsales.com Hilco Industrial, 31555 West Fourteen Mile Rd. Suite 301, Farmington Hills, MI 48334 Phone: 248-254-9999 Fax: 248-254-9995 www.hilcoind.com Hiller Systems, Inc., 1242 Executive Blvd., Chesapeake, VA 23320 Phone: 757-549-9123 Fax: 757-549-1083 Email:
[email protected] www.hillersystemsinc.com Hillscape, Inc., 869 East 725 South, Centerville, UT 84014 Phone: 801 554 3791 Email:
[email protected] www.hillscape.us Hindusthan Mica Mart, Main Road, Giridih-815301, Giridih, 815301 India Email:
[email protected] www.micaexport.diytrade.com
www.powermag.com
Hinkel Equipment Rental Associates, Inc., 2410 High Rd., Huntingdon Valley, PA 19006 Phone: 215-673-6700 Fax: 215-938-0609 Email:
[email protected] www.hinkrent.com
Hitachi Power Systems America Ltd., 645 Martinsville Rd., Basking Ridge, NJ 07920 Phone: 908-605-2800 Fax: 908-604-6211 Email:
[email protected] [email protected] www.hitachipowersystems.us Hitech Instruments, Great Marlings Butterfield, Luton, LU2 8DL United Kingdom Phone: +44 1582 435600 Fax: +44 1582 400901 Email:
[email protected] www.hitech-inst.co.uk Hoffmann, Inc., 6001 49th St. S, Muscatine, IA 52761 Phone: 563-263-4733 Fax: 563-263-0919 Email: hoffmann@hoffmanninc. hoffmann@hoffmanninc. com www.hoffmanninc.com Hoppy Industrial Co. Ltd., 74, Lane 255, Ren-Ai St., San-Chung District, New Taipei City, 241 Taiwan Phone: 886-2-2985-3001 Fax: 886-2-2985-5490 Email:
[email protected] www.hoppy.com.tw HORIBA, 240 Spring Hill Dr., Ste. 410, Spring, TX 77386 Phone: 877-646-7422 Email: rick.struzynski@horiba. com www.horiba.com/us/en/ Hose Master, LLC, 1233 East 222nd St., Cleveland, OH 44117 Phone: 216-481-2020 Email:
[email protected] [email protected] www.hosemaster.com Howden North America, Inc., 7079 Parklane Rd., Ste. 300, Columbia, SC 29223 Phone: 803-741-2700 Fax: 866-757-0941 Email:
[email protected] www.howden.com
|
POWER December 2013
Hoyt Electrical Instrument Works, Inc., 23 Meter St., Penacook, NH 03303 Phone: 603-753-6321 Fax: 603-753-9592 Email: sales @hoytmeter.com @hoytmeter.com www.hoytmeter.com HR Power, 42010 Koppernick Rd., Ste. 117, Canton, MI 48187 Phone: 734-416-9328 Fax: 734-416-9368 Email:
[email protected] www.hrpco.com HTRI, 150 Venture Dr., College Station, TX 77845 Phone: 979-690-5050 Fax: 979-690-3250 www.HTRI.net Hubbell Power Systems, Inc., 210 North Allen, Centralia, MO 65240 Phone: 573-682-5521 Fax: 573-682-8714 Email:
[email protected] www.hubbellpowersystems.com Hurst Technologies Corp., 4005 Technology Dr., Dr., Ste. 1000, Angleton, TX 77515 Phone: 979-849-5068 Fax: 979-849-6663 Email:
[email protected] www.hursttech.com HydraTech HydraTech Engineered Products, 10448 Chester Rd., Cincinnati, CT 45215 Phone: 513-827-9169 Fax: 513-827-9171 Email:
[email protected] www.hydratechllc.com HydraTight / D.L. Ricci, 5001 Moundview Dr., Red Wing, MN 55066 Phone: 651-388-8661 Fax: 651-388-0002 Email:
[email protected] [email protected] www.dlricci.com Hydro Dyne, Inc., P.O. Box 318, 225 Wetmore Ave. S.E., Massillon, OH 44648-0318 Phone: 330-832-5076 Fax: 330-832-8163 Email:
[email protected] www.hydrodyneinc.com Hydro, Inc., 834 West Madison St., Chicago, IL 60607 Phone: 312-738-3000 Fax: 312-738-3226 Email:
[email protected] [email protected]
|
December 2013 POWER
Hydropro, Hydropro, Inc., 2631 Highway J, Bourbon, MO 65441 Phone: 573-732-3318 Fax: 573-732-9408 Email:
[email protected] www.hpro.com Hypercat Advanced Catalyst Products, Products, 1075 Andrew Dr., Ste. C, West Chester, PA 19380 Phone: 610-692-3490 Fax: 610-692-3971 Email: c.jackson@hypercat-acp. com www.hypercat-acp.com HYTORC, 333 Route 17, Mahwah, NJ 07430 Phone: 201-512-9500 Fax: 201-512-9501 Email:
[email protected] www.hytorc.com Hyundai Heavy Industries Co., 140-2 Kye-Dong, Chongro-Ku, Seoul, 110-793 South Korea Phone: 822-746-7576 Fax: 922-746-7548 Email:
[email protected] www.hyundai-elec.com/eng
I I.C.M.I.(Inductive Components Mfg., Inc.), 1200 Ferris Rd., P.O. P.O. Box 188, Amelia, OH 45102 Phone: 513-752-4731 Fax: 513-752-4738 Email:
[email protected] www.ICMIinc.com ICL-IP, ICL-IP, 16800 Imperial Valley Drive, Houston, TX 77060 Phone: 281-445-0676 Fax: 281-445-2284 www.calciumbromides.com IFS North America, Inc., 200 South Executive Dr., Brookfield, WI 53005 Phone: 262-317-7480 Fax: 262-317-7401 Email:
[email protected] www.ifsworld.com igus®, Inc., P.O. P.O. Box 14349, East Providence, Providence, RI 02914 Phone: 401-438-2200 Fax: 401-438-7270 Email:
[email protected] www.igus.com ILLICA Group, 475 Silver St., Poca, WV 25159 Phone: 304-776-9370 Fax: 304-776-9464 Email:
[email protected] www.bluepeterseries.com
ILT-RES, LLC, M.Pokrovskaya st. 18, of. 312 Kostina St. 2, of 132, Nizhniy Novgorod, 603000 Russian Federation Phone: +7 906 366 12 78 Fax: +7 831 433 77 14 Email:
[email protected] [email protected] www.ilt-res.com Imbibitive Technologies America, Inc., 8 Hiscott St., Ste. #1, St. Catharines, ON L2R 1C6 Canada Phone: 888-843-2323 Fax: 877-439-2323 Email:
[email protected] www.imbiberbeads.com Imeco Ltd., Imeco House, Budge Budge Trunk Road Maheshtalla, Dakghar, Kolkata, 700141 India Email:
[email protected] www.imecolimited.com IMR, Inc., 3634 Central Ave., St. Petersburg, FL 33711 Phone: 727-328-2818 Fax: 727-328-2826 Email:
[email protected] www.imrusa.com Incon, 92 Industrial Park Rd., Saco, ME 04072 Phone: 207-283-0156 Fax: 207-283-0158 Email:
[email protected] www.incon.com
Indeck Power Equipment Co., 1111 Willis Ave., Wheeling, IL 60090 Phone: 847-541-8300 Fax: 847-541-9984 Email:
[email protected] www.indeck.com Independent Turbine Consulting, LLC, 15905 Brookway Dr., Ste. 4101A, Huntersville, NC 28078 Phone: 804-397-9411 Email: independent@
[email protected] www.TurbineFieldService.com Indigo Technologies, 8980 Perry Hwy., Pittsburgh, PA 15237 Phone: 412-358-0171 Email:
[email protected] www.indigotechnologise-us.com
www.powermag.com
InduMar Products, Inc., 3355 West Alabama, Ste. 110, Houston, TX 77098 Phone: 713-977-4100 Fax: 713-977-4164 Email:
[email protected] [email protected] www.indumar.com Industrial Contract Services, Inc., P.O. Box 13158, Grand Forks, ND 58208 Phone: 701-775-8480 Fax: 701-775-8479 Email:
[email protected] www.icsgf.com
C O M P A N Y D I R E C T O R Y
Industrial Engineering, S.A. , P.O. Box 4146, Florence, SC 29502 Phone: 843-665-9984 Fax: 843-667-1424 Email:
[email protected] www.industrialengineering-sa.com Industrial Insite, LLC, P.O. Box 286, Osseo, MN 55369 Phone: 763-753-7595 Email: kpitman@industrialinsite. com www.Industrialinsite.com Industrial Magnetics, Inc., 1385 M-75 S., Boyne City, MI 49712 Phone: 231-582-3100 Email:
[email protected] www.magnetics.com Industrial Marketing Systems, P.O. Box 890, Twin Peaks, CA 92391-0890 Phone: 909-337-2238 Fax: 909-336-5293 Email:
[email protected] www.imswe.com Industrial Servo Hydraulics, Inc., 17650 Malyn Blvd., Fraser, MI 48026 Phone: 586-296-0960 Fax: 586-296-0375 Email:
[email protected] www.indservo.com Industrial Solutions International, 326 Ca rter Moir Dr., Lancaster, PA 17601 Phone: 717-560-0310 Email:
[email protected] www.indsolint.com Industrial Training International, 9428 Old Pacific Hwy, Woodland, WA 98674 Phone: 360-225-1100 www.iti.com
81
Y R O T C E R I D Y N A P M O C
Infolytica Corp., Place du Pare 300 Leo Pariseau, Ste. 2222, Montral, Quebec H2X 4B3 Canada Phone: 514-849-8752 Fax: 514-849-4239 Email:
[email protected] www.infolytica.com Infor, Infor, 13560 Morris Rd., Ste. 4100, Alpharetta, GA 30004 Phone: 800-260-2640 Fax: 678-319-8682 Email: sale
[email protected] [email protected] www.infor.com InfoSight Corp., 20700 US H wy. 23, Chillicothe, OH 45601 Phone: 740-642-3600 Fax: 740-642-5001 Email:
[email protected] www.infosight.com INNER-TITE Corp., 110 Industrial Dr., Holden, MA 01520 Phone: 508-829-6361 Fax: 508-829-4469 Email:
[email protected] www.inner-tite.com Innovative Control Systems, Inc., 26 Corporate Dr., Clifton Park, NY 12065 Phone: 518-383-8078 Fax: 518-383-5966 Email: techinfo@icsworldwide
[email protected] .com www.icsworldwide.com Inspectech Corp., 8550 W Charleston Blvd., #102-148, Las Vegas, NV 89117 Phone: 800-705-4357 Email:
[email protected] www.weldtracking.com InStep Software, 55 East Monroe St., Chicago, IL 60603 Phone: 312-894-7837 Email:
[email protected] www.instepsoftware.com Instrument Transformer Equipment Corp. (ITEC), P.O. Box 23088, Charlotte, NC 28227 Phone: 704-282-4331 Fax: 704-283-3017 Email:
[email protected] www.itec-ctvt.com Intek, Inc., 751 Intek Way, Westerville, OH 43082 Phone: 614-895-0301 Email:
[email protected] [email protected] www.intekflow.com
82
Interdevelopment, Inc., 1629 K St. NW, Ste. 300, Washington, DC 20006 Phone: 202-508-1459 Fax: 202-331-3759 Email: interdevelopment@ starpower.net www.interdevelopment.com Intergraph Corp., 300 Intergraph Way, Way, Madison, A L 35758 Phone: 256-730-3390 Email: cathy.lamberth@intergraph. com www.intergraph.com/ppm Interliance, LLC, 4 Hutton C entre, Ste. 1050, Santa Ana, CA 92707 Phone: 714-540-8889 Fax: 714-540-6113 Email:
[email protected] www.interliance.com International Business Systems, 90 Blue Ravine Rd., Folsom, CA 98630 Phone: 916-985-3900 Email:
[email protected] www.ibs.net International Paint, Stoneygate Lane Felling, Gateshead, NE10 0JY United Kingdom Phone: +44 191 402 2661 Email: protectivecoatings@ akzonobel.com www.international-pc.com/coal International Power Machinery Co., 50 Public Sq. Terminal Tower, Tower, Ste. 834, Cleveland, OH 44113 Phone: 216-621-9514 Fax: 216-621-9515 Email:
[email protected] www.intlpwr.com Interpolymer Corp., 200 Dan Rd., Canton, MA 02021 Phone: 781-828-7120 Fax: 781-821-2485 Email:
[email protected] [email protected] www.interpolymer.com Intertek AIM, 16100 Cairnway Dr., Ste. 310, Houston, TX 770843597 Phone: 832-593-0550 Fax: 832-593-0551 Email: aimengineering.info@ intertek.com www.intertek.com/power-generation/ Inuktun Services Ltd., 2569-C Kenworth Rd., Nanaimo, BC V9T 3M4 Canada Phone: 250-729-8080 Fax: 250-729-8077 Email:
[email protected] www.inuktun.com
Invenergy LLC, One South Wacker Drive, Suite 1900, Chicago, IL 60606 Phone: 312-224-1400 Fax: 312-224-1444 www.invenergyllc.com Invensys, 10900 Equity Dr., Houston, TX 77041 Phone: 888.869.0059 Fax: 713-329-1700 Email:
[email protected] www.IOM.Invensys.com Ionics, Inc., 65 Grove St., Watertown, MA 02472 Phone: 617-926-2500 Fax: 617-926-4304 Email:
[email protected] www.ionics.com Iris Power LP, 3110 American Dr., Mississauga, ON L4V 1T2 Canada Phone: 905-677-4824 Fax: 905-677-8498 Email:
[email protected] [email protected] www.irispower.com IRIS Systems, Inc., 7583 Vantage Pl., Delta, BC V4G 1A5 Canada Phone: 604-584-4747 Fax: 604-581-9790 Email:
[email protected] www.iris-systems.com IRISS, 10306 Technology Ter., Ter., Bradenton, FL 34211 Phone: 941-907-9128 Email:
[email protected] www.iriss.com Ironworker Management Progressive Action Cooperative Trust (IMPACT), 1750 New York Avenue, Suite 400, Washington, DC 20006 Phone: 800-545-4921 Fax: 202-393-1148 www.impact-net.org ITT Flygt Corp., 35 Nutmeg Dr., Trumbull, CT 06611 Phone: 203-380-4700 Fax: 203-380-4705 Email:
[email protected] www.flygtus.com ITW Devcon Futura Coatings, 1685 Galt Industrial Blvd., St. Louis, MO 63132 Phone: 314-733-1110 Fax: 314-733-1164 Email: dbryant@futuracoatings. com www.futuracoatings.com
www.powermag.com
Iveco Motors Of North America, 245 E Carol Stream, Carol Stream, IL 60188 Phone: 630-260-4226 Fax: 630-260-4267 Email: margaret.bunting@iveco. com www.ivecomotors.com
J J Custom Supply, Inc., 10013 Mammoth, Baton Rouge, LA 70814 Phone: 225-272-2210 Fax: 225-272-2223 Email:
[email protected] www.jcustom.com J7 Learning & Consulting, P.O. P.O. Box 888, Levittown, PA 19058 Phone: 215-945 4217 Fax: 215-943-0447 Email:
[email protected] www.J7Learning.com Jamison Products, LP, 27760 Commercial Park Rd., Tomball, TX 77375 Phone: 713-466-6951 Fax: 713-466-5051 Email: kabbey@jamisonproducts. com www.jamisonproducts.com Jamko Technical Solutions, Inc., 932 Sohn Alloway Rd., Lyons, NY 14489 Phone: 315-871-4420 Fax: 315-871-4430 Email:
[email protected] www.jamkocorp.com Jarret, Inc., 7 Centre D r., Orchard Park, NY 14127 Phone: 716-662-0406 Fax: 716-740-5121 Email:
[email protected] www.jarret.com JASC: Jansens Aircraft Systems Controls, Inc., 2303 W Alameda Dr., Tempe, AZ 85282 Phone: 602-438-4400 Fax: 602-438-4420 Email:
[email protected] www.jasc-controls.com Jefferson Electric, 9650 S Franklin Dr., Franklin, WI 53132 Phone: 414-209-1620 Fax: 414-209-1621 Email:
[email protected] www.jeffersonelectric.com
|
POWER December 2013
Jeffrey Rader Corp., 398 Willis Rd., Woodruff, SC 29388 Phone: 864-476-7523 Email:
[email protected] www.jeffreyrader.com See our ad on p. 27
Joseph Oat Corp., 2500 Broadway, Camden, NJ 08104 Phone: 856-541-2900 Fax: 856-541-0864 Email:
[email protected] [email protected] www.josephoat.com
Jenny Products, 850 N Pleasant Ave., Somerset, PA 15501 Phone: 814-445-3400 Fax: 814-445-2280 www.jennyproductsinc.com
JoshiJampala Engineering Pvt Ltd., M 64 Additional MIDC, Satara, 415004 India Phone: 2162240097 Fax: 2162240017 Email:
[email protected] www.joshijampala.com
Jiangsu High Hope International International Group Co. Ltd., High Hope Mansion, 91 Baixia Road, Nanjing, 210008 China Phone: 86-25-84691037 Fax: 86-025-84691038 Email:
[email protected] [email protected] www.high-hope.com John Crane, Inc., Mechanical Seals Div., 6400 W Oakton St., Morton Grove, IL 60053 Phone: 847-967-2400 Fax: 847-967-3915 Email:
[email protected] www.johncrane.com John R Robinson Inc., 3805 30th St, Long Island City, NY 11101 Phone: 718-786-6088 www.johnrrobinsoninc.com John Zink Hamworthy Combustion, John Zink Company LLC, Coen Division 951 Mariners Island Blvd. Ste. 410, San Mateo, CA 94404 Phone: 650-522-2100 Fax: 650-522-2147 www.coen.com Johnson Bros Metal Forming Co., 5520 McDermott Dr., Berkeley, IL 60163-1203 Phone: 708-449-7050 Fax: 708-449-0042 Email:
[email protected] www.JohnsonRollForming.com Johnson Matthey Catalysts, LLC, 1121 Alderman Dr., Ste. 204, Alpharetta, GA 30005 Phone: 678-341-7521 Fax: 678-341-7509 Email:
[email protected] www.ect.jmcatalysts.com Jonas, Inc., 4313 Nebraska Ct., Pomfret, MD 20675 Phone: 301-934-5605 Fax: 301-934-5606 Email:
[email protected] [email protected] www.steamcycle.com
|
December 2013 POWER
JOWA USA, Inc., 59 Porter Rd., Littleton, MA 01460 Phone: 978-486-9800 Fax: 978-486-0170 Email:
[email protected] www.jowa-usa.com JR Associates Construction Services, Inc., 1231 Villanova Pl., Riverside, CA 92506 Phone: 951-789-8655 Fax: 951-780-4607 Email:
[email protected] JSHP Trasnformer, 68 Kunlun Development Zone, Liyang, CA 213300 China Phone: 87319632 Email:
[email protected] www.jshp.com JVI Vibratory Equipment, Inc., P.O. Box 40564, Houston, TX 77240-0564 Phone: 832-467-3720 Fax: 832-467-3800 Email:
[email protected] www.jvivibratoryequipment.com
K K&G Power Systems, 150 Laser Ct., Hauppauge, NY 11788 Phone: 631-342-1171 Fax: 631-342-1172 Email:
[email protected] www.kgpowersystems.com Kafko Intl. Ltd., 3555 W Howard, Skokie, IL 60175 Phone: 800-528-0334 Fax: 847-763-0334 Email:
[email protected] www.oileater.com Kahn & Co., Inc., 885 Wells Rd., Wethersfield, CT 06109 Phone: 860-529-8643 Fax: 860-529-1895 Email:
[email protected] www.kahn.com
Kansas City Deaerator, 6731 W 121st St., Overland Park, KS 66209 Phone: 913-338-2111 Fax: 913-338-2144 Email:
[email protected] www.deaerator.com Karl Storz Endoscopy, Mittelstrasse 8, Tuttlingen, 78532 G ermany Phone: 33628750510 Email:
[email protected] [email protected] www.karlstorz.com Kawasaki Gas Turbines - Americas, 8829 North Sam Houston Pkwy., Pkwy., Houston, TX 77064 Phone: 281-970-3255 ext 18 Fax: 281-970-6465 Email:
[email protected] www.kawasakigasturbines.com Kaydon Filtration, 1571 Lukken Industrial Dr. West, LaGrange, GA 31907 Phone: 706.884.3041 Fax: 706-883-6199 Email:
[email protected] [email protected] www.kaydonfiltration.com KCF Technologies, 336 South Fraser St., State College, PA 16801 Phone: 814-867-4097 Fax: 814-690-1579 Email:
[email protected] www.kcftech.com KE-Burgmann EJS, 10035 Prospect Ave., Ste. 202, Santee, CA 92071 Phone: 619-562-6083 Fax: 619-562-0636 Email:
[email protected] [email protected] www.keb-ejs.com KE-Burgmann USA, Inc., 2100 Conner Rd., Ste. 200, Hebron, KY 41048 Phone: 859-746-0091 Fax: 859-746-0094 Email:
[email protected] www.ke-burgmann.com Keco Engineered Controls, 1200 River Ave., Bldg. 3A, Lakewood, NJ 08701 Phone: 732-901-5900 Fax: 732-901-5904 Email:
[email protected] [email protected] www.kecocontrols.com Keith Mfg. Co., 401 NW Adler St., Madras, OR 97741 Phone: 541-475-3802 www.keithwalkingfloor.com
www.powermag.com
Kentube, Kentube, 555 W 4th St., Tulsa, OK 74107 Phone: 918-446-4561 Fax: 918-445-4001 www.kentube.com KEPCO/KPS, Jeongja 1-ro, Bundang-gu,, Seongnam-si, 463729 South Korea Phone: 82-31-710-4127 Email:
[email protected] www.kps.co.kr/eng/ Keystone Electrical Manufacturing Manufacturing Co., 2511 Bell Ave., Des Moines, IA 50321 Phone: 515-661-2775 Email:
[email protected] www.KeystoneEMC.com
C O M P A N Y D I R E C T O R Y
K-Flow Engineering Co. Ltd., No.120-1 , Niaosong 3rd. St., Yongkang District, Tainan, 71042 Taiwan Phone: 2422231 Fax: 2424819 Email:
[email protected] www.kffilters.com.tw Kiewit Power, 9401 Renner Blvd., Lenexa, KS 66219 Phone: 913-928-7000 www.kiewit.com K-II Enterprises, 3996 Box Car Ln., Syracuse, NY 13219 Phone: 315-468-3596 Fax: 315-468-0454 Email:
[email protected] [email protected] www.kiienterprises.com/products/ KIMA Echtzeitsysteme GmbH, Guestener Strasse 72, D-52428 Juelich, Germany Phone: +49 2463 9967 0 Fax: +49 2463 9967 99 Email:
[email protected] [email protected] www.kimae.de KIMRE, Inc., P.O. Box 571240, Miami, FL 33257-1240 Phone: 305-233-4249 Fax: 305-233-8687 Email:
[email protected] www.kimre.com King Filtration Technologies, Inc., 1255 Research Blvd., St. Louis, MO 63132 Phone: 314-432-8441 Fax: 314-432-5147 Email:
[email protected] [email protected] www.king-filter.com
83
Y R O T C E R I D Y N A P M O C
Kingfisher Industrial, Cradley Business Park, Overend Rd., Cradley Heath, B64 7DW UK Phone: +44(0) 1384 410777 Fax: +44(0) 1384 410877 Email:
[email protected] www.kingfisher-industrial.co.uk Kingsbury, Inc., 10385 Drummond Rd., Philadelphia, PA 19154 Phone: 215-824-4000 Fax: 215-824-4999 Email:
[email protected] www.kingsbury.com Kistler Instrument Corp., 75 John Glenn Dr., Amherst, NY 142282171 Phone: 716-691-5100 Fax: 716-691-5226 Email:
[email protected] www.kistler.com Kistler-Morse Corp., 150 Venture Blvd., Spartanburg, SC 293053805 Email:
[email protected] Kitmondo Ltd., 55 Penn Rd., London, N7 9RE United Kingdom Phone: +44 870 366 6150 Fax: +44 870 922 3109 Email:
[email protected] www.kitmondo.com Kleentek, 4440 Creek Rd., Cincinnati, OH 45242 Phone: 800-252-4647 Fax: 513-891-4171 Email:
[email protected] www.kleentek.com KMPT AG, Industriestrasse 1-3, Vierkirchen, 85256 Germany Email:
[email protected] www.kmpt.com KMPT USA, Inc., 8070 Production Production Dr., Florence, KY 41042 Phone: 859-547-1100 Fax: 859-547-1098 Email:
[email protected] www.kmpt.net Knight Piésold Consulting, 1400750 West Pender St., Vancouver, Vancouver, BC V6C 2T8 Canada Phone: 604-685-0543 Fax: 604-685-0147 Email: vancouver@knightpiesold. com www.knightpiesold.com
84
KnightHawk Engineering, 17625 El Camino Real, #412, Houston, TX 77058 Phone: 281-282-9200 Fax: 281-282-9333 Email:
[email protected] www.knighthawk.com Knotts & Co, P.O. Box 1335, Salem, UT 84653 Phone: 801-423-8080 Fax: 801-423-8028 Email:
[email protected] www.knottsco.net Komline-Sanderson, 12 Holland Ave., P.O. P.O. Box 257, Peapack, NJ 07977 Phone: 908-234-1000 Fax: 908-234-9487 Email:
[email protected] www.komline.com Krueger Engr & Mfg. Co., Inc., P.O. Box 11308, Houston, TX 77293-1308 Phone: 281-442-2537 Fax: 281-442-6668 Email:
[email protected] www.kemco.net K-TEK Corp., 18321 Swamp Rd., Prairieville, LA 70769 Phone: 225-673-6100 Fax: 225-673-2525 www.ktekcorp.com KTSDI, LLC, 141 Lost Creek Dr., Youngstown, Youngstown, OH 44512 Phone: 330-783-2000 Email:
[email protected] www.ktsdi.com KUKA Real-Time Products, 17821 E 17th St., Ste. 293, Tustin, CA 92780 Phone: 714-505-1485 Fax: 714-505-1149 Email:
[email protected] www.kuka-rtosusa.com
L La Marche Mfg. Co., 106 Bradrock Dr., Des Plaines, IL 60018 Phone: 847-299-1188 Fax: 847-299-3061 Email: www.sales@lamarchemfg. com www.lamarchemfg.com
Laboratory Testing, Inc., 2331 Topaz Dr., Hatfield, PA 19440 Phone: 800-219-9095 Fax: 800-219-9096 Email:
[email protected] www.labtesting.com
LCR Electronics, 9 South Forest Ave., Norristown, PA 19401 Phone: 610-278-0840 Fax: 610-278-0935 Email:
[email protected] www.lcr-inc.com
Lake Shore Electric Corp., 205 Willis St., Bedford, OH 44146 Phone: 440-232-0200 Fax: 440-232-5644 Email: sales@lake-shore-electric. com www.lake-shore-electric.com
LEA International, 10701 Airport Dr., Hayden, ID 83835 Phone: 800-881-8506 Fax: 208-762-6099 www.leaintl.com
Lanier Consulting, LLC, 141 Lucretia Ln., Columbiana, OH 44408 Phone: 330-322-9185 Fax: 330-482-9236 Email:
[email protected] www.lanierconsult.com Lanj Tools, LLC, 1314-B Center Dr., #424, Medford, OR 97501 Phone: 888-419-1963 Fax: 541-639-4264 Email:
[email protected] www.Lanjtools.com LAP Power Engineering, 800 Village Walk, #237, Guilford, CT 06437 Phone: 203-464-9123 Fax: 203-488-3439 Email: lap.power.engineering@ lap.power.engineering@ comcast.net Laser Imaging Systems, 204-A E McKenzie St., Punta Gorda, FL 33950 Phone: 941-639-3533 Fax: 941-639-6458 Email:
[email protected] www.sunline.net/lis Lasermap Image Plus/GPR, 16 Sixth Line Rd., Bristol, QC J0X 1G0 Canada Phone: 819-647-3085 Fax: 819-647-3085 Email:
[email protected] www.lasermap.com Lazar Scientific, Inc., 51097 Bittersweet R d., P.O. P.O. Box 1128, Granger, Granger, IN 46530 Phone: 574-271-7020 Fax: 574-271-7477 Email:
[email protected] www.lazarsci.com LCI Corp., 4433 C hesapeake Dr., Charlotte, NC 28216 Phone: 704-394-8341 Fax: 704-392-8507 Email:
[email protected] www.lcicorp.com
www.powermag.com
Lectrus Corp., 2215-C Olan Mills Dr., Chattanooga, TN 37421 Phone: 423-894-9268 Fax: 423-894-9337 Email:
[email protected] www.lectrus.com LEDtronics, Inc., 23105 Kashiwa Ct., Torrance, CA 90505 Phone: 310-534-1505 Fax: 310-534-1424 Email:
[email protected] www.LEDtronics.com Leeco Steel, LLC, 8255 S Lemont Rd., Ste. 100, Darien, IL 60561 Phone: 800-621-4366 Fax: 630-427-2190 Email:
[email protected] www.leecosteel.com Lenox Instrument Co., Inc., 265 Andrews Rd., Trevose, PA 19053 Phone: 215-322-9990 Fax: 215-322-6126 Email:
[email protected] www.lenoxinst.com Leslie Controls, Inc., 12501 Telecom Dr., Tampa, FL 33637 Phone: 813-978-1000 Fax: 800-933-7543 Email:
[email protected] www.lesliecontrols.com Liberty Steel Fabricators, 5292 Hog Mountain Rd., Flowery Branch, GA 30542 Phone: 770-616-4042 Fax: 770-967-8005 Email:
[email protected] www.LibertySteelFabricators.com Liburdi Dimetrics Corp., 2599 Charlotte Hwy., Mooresville, NC 28117 Phone: 704-892-8872 Email:
[email protected] www.liburdi.com
|
POWER December 2013
Lifting Gear Hire Corp., 9925 S Industrial Dr., Bridgeview, IL 60455 Phone: 800-878-7305 Fax: 708-430-3536 Email:
[email protected] www.lgh-usa.com Lineal Recruiting Services, 46 Copper Kettle Rd., Trumbull, CT 06611 Phone: 203-386-1091 Fax: 203-386-9788 Email:
[email protected] www.lineal.com Linita Design & Mfg. Corp., 1951 Hamburg Trpk., #24, Buffalo, NY 14218 Phone: 715-566-7753 Email:
[email protected] www.linita.com Lisbon Hoist, Inc., 321 South Beaver St., Lisbon, OH 44432 Phone: 330-424-7283 Fax: 330-424-7445 Email:
[email protected] www.lisbonhoist.com Lista International Corp., 106 Lowland St., Holliston, MA 01746 Phone: 800-722-3020 Fax: 508-626-0353 Email:
[email protected] www.listaintl.com LoadBanks of America, 2004 Howard Ln., Austin, TX 78728 Phone: 877-288-4482 Email: casey@loadbanksofameric casey@loadbanksofamerica. a. com www.loadbanksofamerica.com Lockmasters USA, P.O. Box 2532, Panama City, FL 32402 Phone: 800-461-0620 Fax: 850-914-9754 Email:
[email protected] www.lockmastersusa.com Lockwood Greene, CH2M Hill, P.O. P.O. Box 491, Spartanburg, SC 29304 Phone: 864-578-2000 Fax: 864-599-4117 Email:
[email protected] www.lg.com
|
December 2013 POWER
Look Technologies, LLC, 2723 Wilshire Ave., West Lafayette, IN 47906 Phone: 217-419-5641 Fax: 888-600-7610 Email:
[email protected] www.Lookrvi.com LPP Combustion, LLC, 8940 Old Annapolis Rd., Ste. K, Columbia, MD 21045 Phone: 410-884-3089 Fax: 410-884-3267 Email: couslere@lppcombustion. com www.lppcombustion.com Lucifer Furnaces, Inc., 2048 Bunnell Rd., Warrington, PA 18976 Phone: 215-343-0411 Fax: 215-343-7388 Email: i
[email protected] [email protected] www.luciferfurnaces.com Ludeca, Inc., 1425 NW 88th Ave., Doral, FL 33172 Phone: 305-591-8935 Fax: 305-591-1537 Email:
[email protected] www.ludeca.com Lufft USA, 123 Gray Ave., Santa Barbara, CA 93101 Phone: 805-453-9668 Email:
[email protected] www.lufftusa.com LumaSense Technologies, 3033 Scott Blvd., Santa Clara, CA 95054-3316 Phone: 408-727-1600 Fax: 408-727-1677 Email:
[email protected] www.lumasenseinc.com LYNN Engineered Systems, LLC, 28835 N Herky Dr., Ste. 103, Lake Bluff, IL 60044 Phone: 847-549-8900 Fax: 847-549-8901 Email:
[email protected] www.lynnengineeredsystems.com
M M+P Labs, Inc., 2210 Technology Dr., Schenectady, NY 12308 Phone: 518-382-0082 Fax: 518-382-1182 Email:
[email protected] www.mandplabs.com
M+W Group, Lotterbergstraße 30, Stuttgart, 70499 Germany Phone: 4971188040 Email:
[email protected] www.mwgroup.net Macchi - A Division of Sofinter S.p.A., Largo Buffoni 3, Gallarate (VA), 21013 Italy Email:
[email protected] www.macchiboiler.it Machine Control Systems, 90 Monarch Rd., Guelph, ON N1K 1S3 Canada Phone: 519-767-0830 Fax: 519-767-0841 Email:
[email protected] www.machinecontrolsystems.ca Machinery Mounting Solutions, Inc., 8000 Research Forest Dr., Ste. 115-244, Spring, TX 77382 Phone: 281-298-9911 Fax: 281-220-8368 Email:
[email protected] www.machinerymountingsolutions. com MacroTech, MacroTech, Inc., 246 Mamaroneck Rd., Scarsdale, NY 10583-7242 Phone: 914-723-6185 Fax: 914-723-6085 Email:
[email protected] www.macrotechinc.com Magellan Professional Solutions, Inc., 109-G Gainsborough Sq., #744, Chesapeake, VA 23320 Phone: 757-549-1880 Fax: 866-861-9647 Email:
[email protected] www.magellan-ps.com Magnatech, LLC, 6 Kripes Rd., P.O. Box 260, East Granby, CT 06026 Phone: 860-653-2573 Fax: 860-653-0486 Email:
[email protected] www.magnatechllc.com Magnetics Division, Global Equipment Mktg., Inc., P.O. Box 810483, Boca Raton, FL 334810483 Phone: 561-750-8662 Fax: 561-750-9507 Email:
[email protected] www.globalmagnetics.com Magnetrol International, Inc., 5300 Belmont Rd., Downers Grove, IL 60515 Phone: 630-690-4000 Fax: 630-969-9489 Email:
[email protected] www.magnetrol.com See our ad on p. 5
www.powermag.com
Mainsaver, 15150 Ave. of Science, San Diego, CA 92128 Phone: 858-674-8700 Email: mainsaver.info@mainsaver mai nsaver.info@mainsaver.. com www.mainsaver.com MajorPower Corp., 7011 Industrial Dr., Mebane, NC 27302 Phone: 919-563-6610 Fax: 919-563-6620 Email: order-spport@majorpower. order-spport@majorpower. com www.majorpower.com
C O M P A N Y D I R E C T O R Y
MAN Turbo, Inc. USA, 2901 Wilcrest Dr., Ste. 345, Houston, TX 77042 Phone: 713-780-4200 Fax: 713-780-2848 Email: powergeneration@ manturbo-us.com www.manturbo.com Marathon Sensors, Inc., 3100 E Kemper Rd., Cincinnati, OH 45241-7788 Phone: 513-772-1000 Fax: 513-326-7090 www.marathonsensors.com Martech Media, Inc., 9450 Grogan’s Mill Rd., Ste. 150, The Woodlands, Woodlands, TX 77380 Phone: 281-465-0625 Email: contactus@martechmedai. com www.martechmedia.com
Martin Engineering, One Martin Pl., Neponset, IL 61345 Phone: 309-852-2384 Email:
[email protected] www.martin-eng.com See our ad on p. 54 Master Bond, Inc., 134 Hobart St., Hackensack, NJ 07601 Phone: 201-343-8983 Fax: 201-343-2132 Email:
[email protected] www.masterbond.com Matec In America, 71 South St., Hopkinton, MA 01748 Phone: 508-293-8400 Fax: 508-435-1919 Email:
[email protected] www.matecinamerica.com
85
Y R O T C E R I D Y N A P M O C
Matrix SME, 5100 East Skelly Drive # 700, Tulsa, OK 74135 Phone: 918-838-8822 Fax: 918-838-0782 Email:
[email protected] www.matrixsme.com
MCNS Environmental Systems, Inc., 5940 Young St., Smithville, ON L0R 2A0 Canada Phone: 905-957-7041 Email:
[email protected] www.mcnsenvironmental.com
Megger, 4271 Bronze Way, Dallas, TX 75237 Phone: 800-723-2861 Fax: 214-331-7379 Email: ussa
[email protected] [email protected] www.megger.com
Maven Power, LLC, 134 Vintage Park Blvd., Ste. A-101, Houston, TX 77070 Phone: 832-552-9225 Fax: 832-460-3760 Email: in
[email protected] [email protected] www.mavenpower.com
MDF Cable Bus Systems, 4465 Limaburg Rd., Hebron, KY 41048 Phone: 888-808-1655 Fax: 859-586-6572 Email:
[email protected] www.mdfbus.com
Meltric Corporation, 4640 Ironwood Drive, Franklin, WI 53132 Phone: 414-817-6160 Email:
[email protected] www.meltric.com
Mead & Hunt, Inc., 6501 Watts Rd., Madison, WI 53719 Phone: 608-273-6380 Email:
[email protected] www.meadhunt.com
Membrana, 13800 S Lakes Dr., Charlotte, NC 28273 Phone: 704-587-8888 Fax: 704-587-8610 Email:
[email protected] www.liqui-cel.com
Measurement Specialties, Inc., 1000 Lucas Way, Hampton, VA 23666 Phone: 800-678-7226 Fax: 757-766-4297 Email: denise.topping@meas-spec. denise.topping@meas-spec. com www.meas-spec.com
MEN Micro, Inc., 24 North Main St., Ambler, PA 19002 Phone: 215-542-9575 Fax: 215-542-9577 Email: stephen.cunha@menmicro. com www.menmicro.com
Mazzella Lifting Technologies, 21000 Aerospace Pkwy., Cleveland, OH 44142 Phone: 440-239-7000 Fax: 440-239-7010 Email:
[email protected] www.mazzellalifting.com MB Oil Filters, c/o Meiji Corporation, 660 Fargo Ave., Elk Grove Village, IL 60007 Phone: 847-364-9333 x 652 Email:
[email protected] www.mboilfilters.com MBDi (Mastering Business Development, Inc.), 7422 Carmel Executive Park Dr., Ste. 202, Charlotte, NC 28226 Phone: 704-553-0000 Fax: 704-553-0001 Email:
[email protected] www.mbdi.com McCrometer, McCrometer, 3255 W Stetson Ave., Hemet, CA 92545 Phone: 951-652-6811 Fax: 951-652-3078 www.mccrometer.com McDermott Brothers Products, Products, 2435 W Union St., Allentown, PA 18104 Phone: 610-432-6188 Fax: 610-432-5690 Email:
[email protected] www.iso-con.com McGill AirClean, LLC, 1777 Refugee Rd., Columbus, OH 43207 Phone: 614-829-1200 Fax: 614-445-8759 Email:
[email protected] www.mcgillairclean.com McGills Equipment, 4803 N Milwaukee Ave., Chicago, IL 60630 Phone: 773-209-3211 Email:
[email protected] www.mcgillsequipment.com
86
Mechanical & Ceramic Solutions, Inc., 730 Superior St., Bldg. 16, Carnegie, PA 15106 Phone: 412-429-8991 Fax: 412-429-8766 Email:
[email protected] www.mcs-pa.com
Mechanical Dynamics & Analysis, Ltd., 19 British American Blvd., Latham, NY 12110 Phone: 518-399-3616 Fax: 518-399-3929 Email:
[email protected] www.MDAturbines.com MECS, Inc., 14522 S Outer Forty Rd., Chesterfield, MO 63017 Phone: 314-275-5700 Fax: 314-275-5701 Email: generalquestions@goldwing. generalquestions@goldwing. mecsglobal.com www.mecsglobal.com Meeco, Inc., 250 Titus Ave., Warrington, PA 18976 Phone: 215-343-6600 Fax: 215-343-4194 Email:
[email protected] www.meeco.com
Mercer International Oil Water Separators, P.O. P.O. Box 540, Mendham, NJ 07945 Phone: 973-543-9000 Email:
[email protected] www.oil-water-separators.com MET - Marsulex Environmental Technologies, Technologies, 200 North Seventh St., Lebanon, PA 17046 Phone: 908-235-5125 Email:
[email protected] www.met.net Metabo Corp., 1231 Wilson Dr., West Chester, PA 19380 Phone: 800-638-2264 Fax: 800-638-2261 Email:
[email protected] www.metabousa.com Metalfab, Inc., 11 Prices Switch Rd., P.O. Box 9, Vernon, NJ 07462 Phone: 973-764-2000 Fax: 973-764-0272 Email:
[email protected] www.metalfabinc.com Meteodyn America, 2207 Chestnut St., Philadelphia, PA 19103 Phone: 33240710505 Fax: 33240710506 Email: delphine.pouzet@meteodyn. com www.meteodyn.com
www.powermag.com
Metric Systems Corp., 2320 Cousteau Ct., Ste. 201, Vista, CA 92081 Phone: 760-560-0348 Fax: 760-560-0356 Email:
[email protected] www.metricsystems.com Metrix Instrument Co., A Roper Industries Company, 1771 Townhurst Dr., Houston, TX 77043 Phone: 713-461-2131 Fax: 713-461-8223 Email:
[email protected] www.metrix1.com Metrohm-Peak, 12521 Gulf Freeway, Houston, TX 77034 Phone: 281-484-5000 Fax: 281-484-5001 Email:
[email protected] www.mp-ic.com Metso Power, 3430 Toringdon Way, Way, Charlotte, NC 28277 Phone: 704-541-1453 Fax: 704-541-1128 Email:
[email protected] www.metsopower.com Mettler-Toledo Thornton, Inc., 36 Middlesex Trpk., Bedford, MA 01730 Phone: 781-301-8600 Fax: 781-301-8701 Email:
[email protected] www.us.mt.com MGE UPS Systems, 1660 Scenic Ave., Costa Mesa, CA 92626 Phone: 714-557-1636 Fax: 714-434-0865 www.mgeups.com/us MHT Access Services, Inc., 4127 Hollister St., Ste. A, Houston, TX 77080 Phone: 713-460-4001 Email:
[email protected] www.mhtgroup.net Microbeam Technologies, Inc., 4200 James Ray Dr., Ste. 193, Grand Forks, ND 58203 Phone: 701-777-6530 Fax: 701-777-6532 Email:
[email protected] www.microbeam.com Mid America Engine, 2500 State Hwy. 160, Warrior, AL 35180 Phone: 205-590-3505 Fax: 205-590-3558 Email:
[email protected] www.maegen.com
|
POWER December 2013
Midland-ACS, P.O. Box 422, Grimsby, ON L3M 4H8 Canada Phone: 905-309-1834 Fax: 905-309-1835 Email:
[email protected] www.midland-acs.com
Mission Instruments, 26705 Loma Verde, Verde, Mission Viejo, CA 92691 Phone: 949-582-0889 Fax: 949-916-2193 Email:
[email protected] www.cegrit.com
Mid-Mountain Materials, Inc., 2731 77th Ave. SE, Ste. 100, Mercer Island, WA 98040 Phone: 800-382-2208 Fax: 206-762-7694 Email:
[email protected] www.mid-mountain.com
Mitsubishi Power Systems, Inc., 100 Colonial Center Pkwy., Lake Mary, Mary, FL 32746 Phone: 407-688-6100 www.mpshq.com
Midwest Towers, 1153 Hwy. 19 East, Chickasha, OK 73018 Phone: 405 224 4622 Fax: 405 224 4625 Email:
[email protected] www.midwesttowers.com MikroPul, 4433 Chesapeake D r., Charlotte, NC 28216 Phone: 704-998-2600 Fax: 704-998-2601 Email:
[email protected] www.mikropul.com Milbank Mfg. Co., 4801 De ramus, Kansas City, MO 64120 Phone: 816-483-5314 Fax: 816-483-6357 Email:
[email protected] www.milbankmfg.com Miller Engineering-ANM Equipment, 3801 N Highway Dr., Tucson, AZ 85705 Phone: 520-888-2605 Fax: 520-888-5984 Email: dwarren@anm-equipment. com www.anm-equipment.com Mil-Ram Technology, Inc., 4135 Business Center Dr., Fremont, CA 94538 Phone: 510-656-2001 Fax: 510-656-2004 Email:
[email protected] www.mil-ram.com Minnotte Manufacturing Corp., Minnotte Sq., Pittsburgh, PA 15220 Phone: 412-922-2963 Email:
[email protected] www.minnotte.com MinTech Enterprises, P.O. Box 19903, Atlanta, GA 30325 Phone: 404-355-4580 Fax: 404-963-0459 Email:
[email protected] [email protected]
|
December 2013 POWER
Moffitt Corp., 1351 13th Ave. South, Ste. 130, Jacksonville Beach, FL 32250 Phone: 904-241-9944 Fax: 904-246-8333 Email:
[email protected] www.moffitthvac.com Mogas Industries, 14330 E Hardy St., Houston, TX 77039 Phone: 281.449.0291 Fax: 281-590-3412 Email:
[email protected] www.mogas.com Moisttech, 5140 Commerce Ave., Moorpark, CA 93021 Phone: 805-378-1160 Fax: 803-378-1163 Email:
[email protected] www.moisttech.com
Morgan Schaffer Systems, 5110 Avenue de Courtrai, Montreal, QC H3W 1A7 Canada Phone: 514-739-1967 Fax: 514-739-0434 Email:
[email protected] [email protected] www.morganschaffer.com Mott Corp., 84 Spring Ln., Farmington, CT 06032 Phone: 860-747-6333 Fax: 860-747-6739 Email:
[email protected] www.mottcorp.com MPW Industrial Services, 9711 Lancaster Rd. SE, Hebron, OH 43025 Phone: 740-927-8790 Fax: 740-928-8033 Email:
[email protected] www.mpwservices.com MSE-Tetragenics, MSE-Tetragenics, 65 East Broadway, Butte, MT 59701 Phone: 406-533-6800 Fax: 406-533-6818 Email:
[email protected] www.tetragenics.com MTA Transit, 2 Broadway, New York, NY 10004 Phone: 718-330-1234 www.new.mta.info/nyct
Mole-Master Services Corporation, Reno Business Park, 27815 State Route 7, Marietta, Ohio 45750 Phone: 740-374-6726 Fax: 740-374-5908 Email:
[email protected] [email protected] om www.molemaster.com
MTU Friedrichshafen GmbH, 88040 Friedrichshafen, Germany Phone: +49 7541 90 77777 Fax: +497541 90 77778 Email:
[email protected] www.mtuonsiteenergy.com
Moon Fabricating Corp., 700 W Morgan St., Kokomo, IN 46901 Phone: 765-459-4194 Fax: 765-452-6090 Email:
[email protected] www.moontanks.com
MTU Onsite Energy Corp., 100 Power Drive, Mankato, MN 56001 Phone: 507-625-7973 Fax: 507-625-2968 Email: powe rgen3@mtu-online. rgen3@mtu-online. com www.mtuonsiteenergy.com
MOPAC MOPAC Plant & Building Service, 836 Joseph Lowery Blvd., P.O. P.O. Box 93325 (30337), Atlanta, GA 30318 Phone: 404-872-0434 Fax: 404-892-0250 Email:
[email protected] www.mopac.biz Moran Iron Works, Inc., 11739 M-68 Hwy., P.O. Box 732, Onaway, MI 49765 Phone: 989-733-2011 Fax: 989-733-2371 Email:
[email protected] www.moraniron.com
Multifab, Inc. Fabricators, 1200 Elmwood Ave., Sharon Hill, PA 19079 Phone: 610-534-2000 Fax: 610-534-7308 Email:
[email protected] www.multifabinc.com Muns Welding and Mechanical, Inc., 205 Cary Dr., Beech Island, SC 29842 Phone: 803-827-1572 x202 Fax: 803-827-9034 Email:
[email protected] www.munswelding.com
www.powermag.com
Munters Corp., 225 S Magnolia Ave., Buena Vista, VA 24416 Phone: 540-291-1111 Fax: 540-291-3333 Email:
[email protected] www.munters.us Munters Corp., Mist Eliminator & Tower Packing Div., Div., 210 S ixth St. SE, Fort Myers, FL 33907 Phone: 239-936-1555 Fax: 239-278-1316 Email: usfmycs_me@americas. munters.com www.munters.us
C O M P A N Y D I R E C T O R Y
MWM GmbH, Carl-Benz-Straße 1, Mannheim, 68167 Germany Phone: 6213840 Fax: 621384880 Email:
[email protected] www.mwm.net Myrex Industries, 9119 Weedy Ln., Houston, TX 77093 Phone: 713-691-5200 Email:
[email protected] www.myrex.com
N N.O.W. N.O.W. & Associates, Inc., 172 Bradwick Dr., Concord, Concord, ON K4K 1K8 Canada Phone: 905-669-2461 Fax: 905-669-2685 Email:
[email protected] www.nowassociates.com NAB, 902-904 Whitehorse Rd., Boxhill, VA 3051 Australia Phone: 03-88430397 Fax: 03-88430397 Email:
[email protected] NAES Corporation, 1180 NW Maple St., Ste. 200, Issaquah, WA 98027 Phone: 425-961-4700 Fax: 425-961-4646 Email:
[email protected] www.naes.com See our ad on p. 44 NAES Power Contractors, Inc., 1180 NW Maple St., Ste. 200, Issaquah, WA 98027 Phone: 425-961-4700 Fax: 425-961-4646 Email:
[email protected] www.naes.com Nalco Air Protection Technologies, 1601 W Deihl Rd., Naperville, IL 60563 Phone: 630-305-1328 Email:
[email protected] www.nalcomobotec.com
87
Y R O T C E R I D Y N A P M O C
Namco, 2100 West Broad St., Elizabethtown, NC 28337 Phone: 910-862-2511 Fax: 910-879-5486 Email:
[email protected] www.danaherspecialtyproducts. com/Namco/ Nash, A Gardner Denver Product, Alta Vista Business Park, 200 Simko Blvd., Charleroi, PA 15022 Phone: 724-239-1500 Email:
[email protected] [email protected] www.GDNash.com Nat-Com, 8515 Lafrenaie Blvd., St. Leonard, QC H1P 2B3 Canada Phone: 514-326-2571 Fax: 514-326-9347 Email: info@national-combustion. com www.natcomonline.com
Niagara Blower Co., 673 Ontario St., Buffalo, NY 14207 Phone: 716-875-2000 Fax: 716-875-1077 Email:
[email protected] www.niagarablower.com
NatronX Technologies, Technologies, LLC, 1735 Market St., Philadelphia, PA 19103 Phone: 215-299-6208 Fax: 215-299-6387 Email:
[email protected] [email protected] www.natronx.com
Nilfisk CFM, 300 Technology Dr., Malvern, PA 19355 Phone: 800-645-3475 Fax: 610-647-6427 Email: questions@nilfisk-advance. com www.nilfiskcfm.com
Navigant Consulting, Inc., 30 S Wacker St., Ste. 3100, Chicago, IL 60606 Phone: 312-583-5700 Email:
[email protected] www.navigantconsulting.com/ industries/energy
National Chimney and Stack, 176 North Industrial Blvd., Trenton, GA 30752 Phone: 706-657-1575 Email:
[email protected] www.nationalchimneystack.com
NEM Energy bv, P.O.Box 162, 2300 AD Leiden, The Netherlands Phone: +31 71579 2444 Fax: +31 71579 2792 Email:
[email protected] www.nem-group.com
National Conveyors Co., Inc., 33 Nicholson Rd., East Granby, CT 06026 Phone: 860-653-0374 Fax: 860-653-2965 Email:
[email protected] www.nationalconveyors.com
Neptune Underwater Services (USA), LLC., 123 Sentry, Mansfield, TX 76063 Phone: 800-860-2178 Fax: 817-447-0021 Email: js
[email protected] [email protected] www.neptunems.com
National Electric Coil, 800 King Ave., Columbus, OH 43212 Phone: 614-488-1151 Fax: 614-488-8892 Email: sendinfo@national-electri
[email protected] www.national-electric-coil.com National Inspection & Consultants, Inc., 9911 Bavaria Rd., Ft. Myers, FL 33913 Phone: 941-475-4882 Fax: 321-234-0305 Email:
[email protected] [email protected] www.nicinc.com National Technical Systems, 24007 Ventura Blvd., Ste. 200, Calabasas, CA 91302 Phone: 818-591-0776 Fax: 818-591-0899 Email:
[email protected] www.ntscorp.com
88
Nationwide Boiler, Inc., 42400 Christy St., Fremont, CA 94538 Phone: 510-490-7100 Fax: 510-490-0571 Email:
[email protected] www.nationwideboiler.com
www.nol-tec.com
Nol-Tec Systems, Inc., 425 Apollo Dr., Lino Lakes, MN 55014 Phone: 651-780-8600 Fax: 651-780-4400 Email:
[email protected] www.nol-tec.com See our ad on p. 49 Nooter/Eriksen, Inc., 1509 Ocello Dr., Fenton, MO 63026 Phone: 636-651-1000 Fax: 636-651-1500 Email:
[email protected] www.ne.com
NES Rentals, 8770 W Bryn Mawr, Mawr, 4th Floor, Chicago, IL 60631 Phone: 773-695-3999 Fax: 773-714-0538 Email: request_info@nesrentals. com www.nesrentals.com
NORD Drivesystems - Getriebebau NORD GmbH & Co. KG, RudolfDiesel-Str. 1, Bargteheide, Bargteheide, 22941 Germany Phone: +49 4532 401-0 Fax: +49 4532 401-253 Email: i
[email protected] [email protected] www.nord.com
Nesco Sales & Rentals, 3112 East State Rd. 124, Bluffton, IN 46714 Phone: 800-252-0043 Fax: 260-824-6350 Email:
[email protected] www.nescosales.com
NORD-LOCK, 1051 Cambridge Dr., Elk Grove Village, IL 60007 Phone: 877-799-1097 Fax: 224-875-3256 Email: julie.pereyra@nord-lock-inc. com www.nord-lock.com
NeuCo, Inc., 33 Union St., 4th Floor, Floor, Boston, MA 02108 Phone: 617-587-3188 Fax: 617-262-4186 Email:
[email protected] www.neuco.net
North Side Power Transmission Corp., 309 Morgan Ave., Brooklyn, NY 11211 Phone: 718-782-5800 Fax: 718-782-1757 Email:
[email protected] www.nsptcorp.com
Newport Electronics, Inc., 2229 S Yale St., Santa Ana, CA 92704 Phone: 714-540-4914 Email:
[email protected] www.newportus.com
www.powermag.com
Northern Cast Parts Co., Inc., 304-2185 Marine Dr., Oakville, ON L6L 5L6 Canada Phone: 905-465-1773 Fax: 905-465-1775 Email: sales@northerncastparts. com www.northerncastparts.com Norton Corrosion Ltd., 8820 222nd St. SE, Woodinville, WA 98077 Phone: 425-483-1616 Fax: 425-485-1754 Email:
[email protected] www.nortoncorrosion.com Nova Analytical Systems, Inc., 1925 Pine Ave., Niagara Falls, NY 14301 Phone: 800-295-3771 Fax: 716-282-2937 Email:
[email protected] www.nova-gas.com Nova Machine Products, Inc., 18001 Sheldon Rd., Middleburg Heights, OH 44130 Phone: 216-267-3200 Fax: 216-267-8518 Email:
[email protected] www.novamachine.com Novinda Corp., 2000 S Colorado Blvd., Ste. 3-A, Denver, CO 80222 Phone: 720-473-8320 Fax: 720-473-8360 Email:
[email protected] www.novinda.com Novinium, 1221 29th St. NW, Ste. D, Auburn, WA 98001 Phone: 253-288-7100 Fax: 206-774-9754 Email: steve.sparkman@novinium. com www.novinium.com NRG Energy Services, 1000 Main Street, Houston, TX 77002 Phone: 855-532-4984 nrgenergy.com/energyservices/ oandm NSP Specialty Products, P.O. P.O. Box 4690, Pinehurst, NC 28374-4690 Phone: 910-235-0468 Fax: 910-235-3902 Email:
[email protected] www.nsp-specialty.com Nuclear Systems Associates, Inc., 2701 Saturn St., Brea, CA 92821 Phone: 949-499-9980 Fax: 949-499-9980 Email:
[email protected] www.nuclearsystems.com
|
POWER December 2013
O Oak Park Chimney, 1800 Des Plaines Ave., Forest Park, IL 60130 Phone: 800-476-2278 Fax: 708-386-4004 Email: cwessels@oakparkchimney. com O’Donnell Consulting Engineers, Inc., 2940 South Park Rd., Bethel Park, PA 15102 Phone: 412-835-5007 Fax: 412-835-5017 Email: wo@odonnellconsulting. com www.odonnellconsulting.com Oil Skimmers Inc., P.O. P.O. Box 33092, 12800 York Rd., Cleveland, OH 44133 Phone: 440-237-4600 Fax: 440-582-2759 Email:
[email protected] www.oilskim.com OILKLEEN, Inc., 1510 River Dr. SW, SW, Ste. A, Ruski n, FL 33570 Phone: 813-333-6356 Fax: 813-944-2893 Email:
[email protected] www.oilkleen.com Olin Brass - Fi neweld Tube, 102 Progress Pkwy., Cuba, MO 65453 Phone: 573-885-6546 Fax: 573-885-6500 Email:
[email protected] www.fineweldtube.com Omaha Standard PALFINGER, 3501 S 11th St., Council Bluffs, IA 51501-0876 Phone: 800-279-2201 Fax: 712-328-8383 Email:
[email protected] www.omahastd.com OMSCO, 2150 Baneberry Dr., Birmingham, AL 35244-1400 Phone: 205-994-1847 Fax: 205-403-0829 Email: david.brunson@omscoin david.brunson@omscoinc. c. com www.omscoinc.com Onset, HOBO Data Loggers, 470 MacArthur Blvd., Bourne, MA 02532 Phone: 800-564-4377 Fax: 508-759-9100 Email:
[email protected] www.onsetcomp.com
Open Systems International (OSI), 3600 Holly Ln. N, Ste. 40, Minneapolis, MN 55447-1286 Phone: 763-551-0559 Fax: 763-551-0750 Email:
[email protected] www.osii.com OpenLink, 1021 Main St., Ste. 1200, Houston, TX 77002 Phone: 713-655-9600 Fax: 713-655-9605 Email:
[email protected] www.olf.com Oracle Primavera, Three Bala Plaza West, Ste. 700, Bala Cynwyd, PA 19004 Phone: 800-633-0738 www.oracle.com Orbeco Analytical Systems, Inc., 185 Marine St., Farmingdale, NY 11735 Phone: 631-293-4110 Fax: 631-293-8258 Email:
[email protected] www.orbeco.com Orion Instruments, Instruments, LLC, 2105 Oak Villa Blvd., Baton Rouge, LA 70815 Phone: 225-906-2343 Fax: 225-906-2344 Email: emoore@orioninstruments. com www.orioninstruments.com
Pacific Northwest National Laboratory, Laboratory, 902 Battelle Blvd, Richland, WA 99354 Phone: 509-375-2121 www.pnnl.gov Paharpur Cooling Towers Ltd., Paharpur House 8/1/B Diamond Harbour Road, Kolkata, 700 027 India Phone: 91-33-4013 3000 Fax: 91-33-4013 3499 Email:
[email protected] www.paharpur.com See our ad on p. 23 Palfinger North America, P.O. Box 846, 7942 Dorchester Rd., Niagara Falls, ON L2E 6V6 C anada Phone: 800-567-1554 Fax: 905-374-1203 Email:
[email protected] www.palfinger-northamerica.com Pall Corp., 25 Harbor Park Dr., Port Washington, NY 11050 Phone: 516-484-3600 Fax: 516-484-0364 Email:
[email protected] www.pall.com Palm Beach Resource Recovery., 6501 N Jog Rd, West Palm Beach, FL 33412 Phone: 561-478-3800 Palmetto Depot Services, LLC, 3 Conservation Ct., Savannah, GA 31419 Phone: 912-660-8118 Email:
[email protected]
Orival Water Filters, 213 S Van Brunt St., Englewood, NJ 07631 Phone: 201-568-3311 Fax: 201-568-1916 Email:
[email protected] www.orival.com OVIVO USA, LLC, 4246 Riverboat Rd., Ste. 300, Salt Lake City, UT 84123 Phone: 801-931-3113 Fax: 801-931-3090 Email:
[email protected]@ovivowater.com www.ovivowater.com
P
Panasonic Computer Solutions Co., 50 Meadowland Pkwy., Secaucus, NJ 07094 Phone: 800-662-3537 ext 5 Fax: 201-271-3460 www.panasonic.com/toughbook/ energy
Panglobal Training Systems Ltd., 1301 16 Ave. NW, Calgary, AB T2M 0L4 Canada Phone: 866-256-8193 Fax: 403-284-8863 Email: info@powerengineering
[email protected] .org www.powerengineering.org
P&S Vorspannsysteme AG, Rietwiesstrasse 2, St.Gallenkappel, 8735 Switzerland Phone: +41 55 284 64 64 Email:
[email protected] www.p-s.ch
|
December 2013 POWER
www.powermag.com
Paragon Airheater Technologies, Technologies, 23143 Temescal Canyon Rd., Ste. B, Corona, CA 92883 Phone: 951-277-8035 Fax: 951-277-8031 Email: cturner@paragonairheater. cturner@paragonairheater. com www.paragonairheater.com Parker Fluid Control Division, 95 Edgewood Ave., New Britain, CT 06051 Phone: 860-827-2300 Fax: 860-827-2384 Email:
[email protected] [email protected] www.parkerfluidcontrol.com
C O M P A N Y D I R E C T O R Y
Parker Hannifin- Precision Cooling Systems Division, 10801 Rose Ave., New Haven, IN 46774 Phone: 509-552-5112 Email:
[email protected] [email protected] www.parker.com/pc Parkline, Inc., P.O. Box 65, Winfield, WV 25213 Phone: 800-786-4855 Fax: 304-586-3842 Email:
[email protected] www.Parkline.com See our ad on p. 38 Parkson Corp., 5420 Spring Ln., Minnetonka, MN 55345 Phone: 954-558-4470 Email:
[email protected] www.parkson.com Parmar Metals Pvt. Ltd., 28, A Bhaktinagar Industrial Estate, Rajkot, 360004 India Phone: 91-0281-362256 Fax: 91-0281-365240 Email:
[email protected] www.parmarmetal.com Patriot Solar Group, 1007 Industrial Ave., Albion, MI 49224 Phone: 517-629-9292 Fax: 517-629-9296 Email: info@patriotsolargroup. info@patriotsolargroup. com www.patriotsolargroup.com Paul Mueller Co., 1600 West Phelps St., Springfield, MO 65802 Phone: 417-575-9000 Fax: 417-575-9669 Email:
[email protected] www.paulmueller.com PB Power, a Division of Parsons Brinckerhoff Quade & Douglas, 75 Arlington St., 4th Floor, Boston, MA 02116 Phone: 617-960-4864 Fax: 617-960-5460 Email:
[email protected] www.pbworld.com 89
Y R O T C E R I D Y N A P M O C
PECO, 27881 Clemens Rd., Westlake, OH 44145 Phone: 440-899-3888 Fax: 440-899-3890 Email: in
[email protected] [email protected] www.peco-fgc.com
Petro-Valve, Petro-Valve, 11248 Eas t Hardy St., Houston, TX 77093 Phone: 713-676-1212 Fax: 832-615-5303 Email:
[email protected] www.petrovalve.com
Pemamek Oy Ltd., Lamminkatu 47, Loimaa, 32201 Finland Phone: 760415 Fax: 7628304 Email: jukka.rantala@pemamek. com www.pemamek.com
PFBC Environmental Energy Technology, nology, Inc., 111 Riverview Dr., Monessen, PA 15062 Phone: 724-684-4844 Fax: 724-684-4944 Email:
[email protected] www.pfbceet.com
Penn Separator Corp., P.O. Box 340, 5 South Pickering, Brookville, PA 15825 Phone: 814-849-7328 Fax: 814-849-4510 Email:
[email protected] [email protected] www.pennseparator.com
PGH Marketing, 1028 Oakmont Ave., Unit A, Oakmont, PA 15139 Phone: 412-225-7478 Fax: 412-202-0450 Email: sbarbaro@pghmarketing. com www.pghmarketing.com
Pennsylvania Breaker, Breaker, LLC, 30 Curry Ave., P.O. P.O. Box 441, Canonsburg, PA 15301 Phone: 724-743-4376 Fax: 724-743-4850 www.pabreaker.net
PGI International, 16101 Vallen Dr., Houston, TX 77041 Phone: 713-466-0056 Fax: 800-744-9899 www.pgiint.com
Pennsylvania Crusher, 600 Abbott Dr., Broomall, PA 19008 Phone: 610-544-7200 Email:
[email protected] [email protected] www.penncrusher.com PENTA Industrial Corp., 10276 Bach Blvd., St. Louis, MO 63132 Phone: 314-878-0143 Fax: 314-878-0166 Email:
[email protected] www.pentaindustrial.com Pentair Valves & Controls (formerly known as Tyco Valves & Controls), 4607 New West Dr., Pasadena, TX 77507 Phone: 832-261-2416 Fax: 281-291-8801 Email:
[email protected] www.pentair.com/valves People and Processes, Inc., P.O. P.O. Box 460, Yulee, FL 32041 Phone: 843-814-3795 Email:
[email protected] www.peopleandprocesses.com Performance Performance Consulting Services, 154 Colorado Ave., Montrose, CO 81401 Phone: 970-240-4381 Fax: 720-528-8107 Email:
[email protected] www.pcs-mail.com
90
Phenix Technologies, Inc., 75 Speicher Dr., Accident, MD 21520 Phone: 301-746-8118 Fax: 301-895-5570 Email:
[email protected] www.phenixtech.com Philippi-Hagenbuch, Inc., 7424 W Plank Rd., Peoria, IL 61604 Phone: 309-697-9200 Fax: 309-697-2400 Email:
[email protected] www.philsystems.com Phillips 66, E-Gas Technology for Gasification, P.O. Box 4428, Houston, TX 77210 Phone: 832-765-1398 Fax: 918-662-8717 Email:
[email protected] www.e-gastechnology.com Phillips 66, Lubricants, P.O. P.O. Box 4428, Houston, TX 77210 Phone: 832-765-2132 Fax: 918-977-8769 Email:
[email protected] www.phillips66lubricants.com Phoenix Air Flow, Inc., 1453 Mars Ave., Lakewood, OH 44107 Phone: 216-228-8468 Fax: 216-228-8596 Email:
[email protected]
Photon Control, 8363 Lougheed Hwy., Burnaby, Burnaby, BC V5A 1X3 Phone: 604-422-8861 Email:
[email protected] www.photon-control.com PIC Group, Inc., 1000 Parkwood Circle, Ste. 1000, Atlanta, GA 30339 Phone: 770-850-0100 Fax: 770-850-2200 Email:
[email protected] www.picworld.com See our ad on p. 19
Pick Heaters, Inc., 730 S Indiana Ave., West Bend, WI 53095 Phone: 262-338-1191 Fax: 262-338-8489 Email:
[email protected] www.pickheaters.com PICOR, 1730 Old Gray Station Rd., Gray, TN 37615 Phone: 423-282-9900 Fax: 423-282-3118 www.picor.biz Pittsburg Tank & Tower Maintenance Co., P.O Box 913, Henderson, KY 42419 Phone: 270-826-9000 Fax: 270-827-4417 Email:
[email protected] www.watertank.com Plant Professionals, 1851 Albright Rd., Montgomery, Montgomery, IL 60538 Phone: 630-844-1300 X220 Fax: 630-844-0064 Email:
[email protected] www.plantprofessionals.com Plant Specialties, Inc., P.O. P.O. Box 110537, Carrollton, TX 750110537 Phone: 972-245-9673 Fax: 972-245-9699 Email:
[email protected] www.bryer-dfw.com PlantKorea Co., 1366-6 JoongDong, Gwangyang-City, 545880 South Korea Phone: 82-10-3310-4529 Fax: 82-61-795-4529 Email:
[email protected] www.plantkorea.net Platts UDI, 1200 G St NW, Ste. 1000, Washington, DC 20005 Phone: 202-942-8788 Fax: 202-942-8789 Email:
[email protected] www.platts.com
www.powermag.com
Plymouth Tube Co., 29W150 Warrenville Rd., Warrenville, IL 60555 Phone: 630-393-3550 Fax: 630-393-3551 www.plymouth.com Pneumafil Corp., Gas Turbine Div., P.O. P.O. Box 16348, Charlotte, NC 28297 Phone: 704-399-7441 Fax: 704-398-7507 Email:
[email protected] www.pneumafil.com POLARIS Laboratories, 7898 Zionsville Rd., Indianapolis, IN 46268 Phone: 877-808-3750 Fax: 317-808-3751 Email:
[email protected] www.polarislabs.com Political Robo Calls. GOTV Robocalls, 30150 Telegraph Rd., Bingham Farms, MI 48025 Phone: 800-962-0126 Email:
[email protected] www.voiceshot.com/public/political.asp Polsinelli Shughart, PC, 1152 15th St., NW, NW, Ste. 800, Washington, DC 20005 Phone: 202-626-8356 Fax: 202-315-3050 Email:
[email protected] www.polsinelli.com Polycorp Ltd., 33 York St., Elora,, ON N0B 1S0 Canada Phone: 519-846-2075 Fax: 519-846-2372 Email:
[email protected] www.poly-corp.com Portland Bolt & Manufacturing, 3441 NW Guam St., Portland, OR 97210 Phone: 800-547-6758 Fax: 503-227-4634 Email:
[email protected] www.portlandbolt.com Positron, Inc., 5101 Buchan St., Montreal, QC H4P 2R9 Canada Phone: 514-345-2200 Fax: 514-345-2271 Email:
[email protected] www.positronpower.com Power & Industrial Services, 95 Washington Street, P.O. Box 211, Donora, PA 15033 Phone: 800-676-7116 www.piburners.com See our ad on p. 14
|
POWER December 2013
POWER Engineers, Inc., 3940 Glenbrook Dr., Hailey, ID 83333 Phone: 208-788-3456 Fax: 208-788-2082 Email:
[email protected] www.powereng.com Power Equipment Maintenance, 19300 Statesville Rd., Ste. #300, Cornelius, NC 28031 Phone: 864-622-2129 Email:
[email protected] [email protected] www.peminc.net Power Generation Service, Inc., 1160 McKinley St., Anoka, MN 55303 Phone: 763-421-1104 Fax: 763-421-3451 www.powergensvc.com Power Source International, 6408 East 95th Pl., #200, Tulsa, OK 74137 Phone: 918-764-8817 Fax: 918-764-8817 Email:
[email protected] www.powermag.com Power Systems Mfg., LLC, 1440 W Indiantown Rd., Jupiter, FL 33458 Phone: 561-354-1100 Fax: 561-354-1199 Email:
[email protected] [email protected] www.powermfg.com Powerspan Corp., 100 International Dr., Ste. 200, Portsmouth, NH 03801 Phone: 603-570-3000 Fax: 603-570-3100 Email:
[email protected] [email protected] www.powerspan.com Pragmatics Hydrogen Leak Detection, 8440 Central Ave., Newark, CA 94560 Phone: 510-794-4296 Fax: 510-794-4330 Email:
[email protected] www.pragmatics-arson.com
Precision Blasting, Inc., P.O. Box 785, Flatwoods, KY 41139 Phone: 606-836-2600 Fax: 606-836-2698 Email: precision_blasting@ precision_blasting@ worldnet.att.net www.bpionline.com
Process Equipment/Barron Industries, 2770 Welborn St., Pelham, AL 35124 Phone: 205-663-5330 Fax: 205-663-6037 Email: wunderwood@
[email protected]
Premier Energy Services, Inc., 140 Colony Center Dr., Ste. 202, Woodstock, GA 30188 Phone: 770-592-1398 Fax: 770-592-2316 Email:
[email protected] www.premierenergy.com
Processes Unlimited International, Inc., 5500 Ming Ave., Ste. 400, Bakersfield, CA 93309 Phone: 661-396-3770 Fax: 661-396-3782 Email:
[email protected] [email protected] www.prou.com
Pressure Systems, Inc., 34 Research Dr., Hampton, VA 23666 Phone: 757-865-1243 Fax: 757-865-8744 Email:
[email protected] www.pressuresystems.com
Prochaska & Associates, 11317 Chicago Circle, Omaha, NE 681542633 Phone: 402-334-0755 Fax: 402-334-0868 Email:
[email protected] [email protected] www.architectsusa.com
Price Brothers Co., 333 W First St., Ste. 700, Dayton, OH 45402 Phone: 937-226-8829 Fax: 937-226-8752 Email:
[email protected] [email protected] www.pipesite.com
Proe Power Systems, LLC, 5072 Morning Song Dr., Medina, OH 44256-6747 Phone: 800-315-0084 Email:
[email protected] www.proepowersystems.com
Primesouth, Inc., 246 Stoneridge Dr., Ste. 101, Columbia, SC 29210 Phone: 803.753.5199 Fax: 803-354-4260 Email: tevergetis@primesouthinc. com www.primesouth.biz PRO Solutions, Inc., 30 Bethel Rd., Glen Mills, PA 19342 Phone: 865-414-7644 Email: jdischner@p-rosolutions. jdischner@p-rosolutions. com www.p-rosolutions.com Process Automation and Control, Inc., 4502 Cogswell Ave., Pell City, AL 35125 Phone: 205-338-1147 Fax: 205-338-1167 Email:
[email protected] [email protected] www.pac-service.com
Praxair Surface Technologies, 7615 Fairview St., Houston, TX 77041 Phone: 443-831-1536 Email:
[email protected] www.praxairsurfacetechnologies. com
Process Barron, P.O. Box 1607, 2770 Welborn Street, Pelham, AL 35124 Phone: 888-663-2028 Fax: 205-663-6037 www.processbarron.com/
Precast Specialties Corp., 999 Adams St., P.O. Box 86, Abington, MA 02351 Phone: 781-828-7220 Fax: 781-878-7464 Email:
[email protected] [email protected] www.precastspecialtiescorp.com
Process Engineering & Manufacturing, 13653 Beach St., Cerritos, CA 90703 Phone: 310-548-1523 Fax: 562-602-1918 Email:
[email protected] www.peandm.com
|
December 2013 POWER
ProEnergy Services, 2001 ProEnergy Blvd., Sedalia, MO 65301 Phone: 660-829-5100 Fax: 660-829-1160 Email:
[email protected] www.proenergyservices.com See our ad on Cover 4 Promecon USA, Inc., 314 Collins Blvd., Orrville, OH 44667 Phone: 330-683-9074 Email:
[email protected] www.promecon.us ProMinent Dosiertechnik GmbH, Im Schuhmachergewann Schuhmachergewann 5-11, Heidelberg, 69123 Germany Phone: +49 6221 842 0 Fax: +49 6221 842 617 Email:
[email protected] [email protected] www.prominent.com ProSonix, P.O. Box 26676, Milwaukee, WI 53226-0676 Phone: 800-849-1130 Fax: 800-849-1130 Email:
[email protected] www.pro-sonix.com Proton OnSite, 10 Technology Dr., Wallingford, CT 06492 Phone: 203 949 8697 Fax: 203 949 8016 Email: customerservice@
[email protected] www.protononsite.com
www.powermag.com
PS International, Inc., 5309 East Ryan Pl., Sioux Falls, SD 57110 Phone: 605-332-1885 Fax: 605-332-1293 Email:
[email protected] [email protected] www.psinternational.com PSB Industries, 1202 West 12th St., Erie, PA 16501 Phone: 814-453-3651 Fax: 814-454-3492 Email:
[email protected] [email protected] www.psbindustries.com
C O M P A N Y D I R E C T O R Y
PTMW, Inc., 5040 NW US Hwy. 24, Topeka, KS 66618 Phone: 785-232-7792 Fax: 785-232-7793 Email:
[email protected] www.ptmw.com Pugmill Systems, Inc., 212 Cemetery Ave., Columbia, TN 38401 Phone: 931-388-0626 Fax: 931-380-0319 Email:
[email protected] www.pugmillsystems.com Pulse Corp., PMB 216, 1799 W 5th Ave., Columbus, OH 432122322 Phone: 800-394-5688 Fax: 614-340-7106 www.lifehook.com Pumping Solutions, Inc., 2850 139th St., Blue Island, IL 60406 Phone: 708-272-1800 Fax: 708-272-1825 Email:
[email protected] www.pump96.com Pure Technologies Ltd., 4700 Dixie Rd., Mississauga, ON L4W 2R1 Canada Phone: 289-374-3598 Email:
[email protected] [email protected] www.puretechltd.com PWR - Plasma Waste Recycling, 250 Finney Dr., Huntsville, AL 35824 Phone: 256-258-2800 Fax: 256-258-2803 Email:
[email protected] www.plasma-wr.com
Q Qinhuangdao Huadian Survey Instrument and Controller Co. Ltd., 367 Wenhua Road, Qinhuangdao, Hebei, 66000 China Phone: 0086-13633333120 Fax: 0086-335-3640930 Email:
[email protected] www.hdsc.net 91
Y R O T C E R I D Y N A P M O C
Quanta Services, 2800 Post Oak Blvd., Ste. 2600, Houston, TX 77056 Phone: 713-629-7600 Email:
[email protected] [email protected] www.quantaservices.com
Redline Industries, Inc., 8401 Mosley Rd., Houston, TX 77075 Phone: 713-946-5355 Fax: 713-946-0747 Email:
[email protected] [email protected] www.redlineindustries.com
Quest-Tec Solutions, P.O. Box 2127, Stafford, TX 77497 Phone: 866-240-9906 Email:
[email protected]@questtecsolutions.com www.questtecsolutions.com
Reef Industries, Inc., Griffolyn, 9209 Almeda Genoa Rd., Houston, TX 77075 Phone: 713-507-4251 Fax: 713-507-4295 Email:
[email protected] www.reefindustries.com
Quietly Making Noise, 300 W Mitchell Hammock Rd., Ste. 8, Oviedo, FL 32765 Phone: 407-359-5146 Fax: 407-977-9646 Email:
[email protected] [email protected] www.quietlymakingnoise.com
R R&G Laboratories, Inc., 217 Hobbs St., Ste. 105, Tampa, FL 33619 Phone: 813-643-3513 Fax: 813-793-4429 Email:
[email protected] www.randglabs.com R. W. Beck, Inc., 1801 California St., Ste. 2800, Denver, CO 80202 Phone: 303-299-5200 Fax: 303-297-2811 www.rwbeck.com Randall Industries, Industries, 741 S Route 83, Elmhurst, IL 60126-4268 Phone: 800-966-7412 Fax: 630-833-9108 Email:
[email protected] www.fiberglassscaffolds.com RCI Technologies, 462 Borrego Ct., Ste. D, San Dimas, CA 91773 Phone: 800-868-2088 Fax: 909-305-1245 Email:
[email protected] [email protected] www.rcitechnologies.com RdF Corp., 23 Elm Ave., Hudson, NH 03051 Phone: 603-882-5195 Fax: 603-882-6925 Email:
[email protected] [email protected] www.rdfcorp.com React 365, Inc., P.O. Box 2788, Pawleys Island, SC 29585 Phone: 866-811-8365 Fax: 866-450-0553 Email:
[email protected] www.react365.com
92
Reliance industries Ltd., 2/31, Kaveri Apartment Dahej Bypass Road, Bharuch, 392001 India Phone: 9898201310 Email:
[email protected] [email protected] REMBE GmbH - Safety + Control, Gallbergweg 21, Brilon, 59929 Germany Phone: +49 2961 7405-0 Fax: +49 2961 50714 Email:
[email protected] www.rembe.de Remtron, 1916 West Mission Rd., Escondido, CA 92029 Phone: 800-328-5570 Fax: 760-737-7810 Email:
[email protected] [email protected] www.remtron.com Renewal Parts Maintenance, 4485 Glenbrook Rd., Willoughby, OH 44094 Phone: 440-946-0082 Fax: 440-946-5524 Email:
[email protected] www.RenewalParts.com
Reverso Pumps, Inc., 201 SW 20th St., Fort Lauderdale, FL 33064 Phone: 954-523-9396 Email:
[email protected] [email protected] www.reversopumps.com REW Solar USA, 215-415 Northern Blvd., Bayside, NY 11361 Phone: 718-225-6600/2 Fax: 718-225-6605 Email:
[email protected] www.rewsolarusa.com Reynolds, Inc., 4520 North State Rd. 37, Orleans, IN 47452 Phone: 812-865-3232 Fax: 812-865-3075 Email:
[email protected] [email protected] www.reynoldsinc.com RF System Lab, 123 W Main St., Gaylord, MI 49735 Phone: 989-731-5083 Fax: 989-688-5966 Email:
[email protected] [email protected] www.rfsystemlab.us RH Systems, 3416 Vista Alameda NE, Albuquerque, NM 87113 Phone: 505-856-5766 Fax: 866-891-3399 Email: k
[email protected] www.rhs.com Richmond Engineering Works, 1601 Parkway View Dr., Pittsburgh, PA 15205 Phone: 412-787-9640 Fax: 412-787-9645 Email: dfetcko@
[email protected] www.richmondengineering.com Rig-A-Lite, 8500 Hansen Rd., Houston, TX 77075 Phone: 713-943-0340 Fax: 713-943-8354 Email:
[email protected] [email protected] www.rigalite.com
Rentech Boiler Systems, Inc., 5025-A East Business 20, Abilene, TX 79601-6411 Phone: 325-672-3400 Fax: 325-672-9996 Email:
[email protected] [email protected] www.rentechboilers.com
Riley Power, Inc., 5 Neponset St., P.O. Box 15040, Worcester, MA 01615-0040 Phone: 508-852-7100 Fax: 508-852-7548 Email:
[email protected] [email protected] www.babcockpower.com
RetubeCo, Inc., 6024 OoltewahGeorgetown Rd., Ooltewah, TN 37363 Phone: 423-238-4814 Fax: 423-238-9028 Email:
[email protected] [email protected] www.retubeco.com
Ritepro Inc., A subsidiary of BRAY International, Inc., 12200 Alberty Hudon Blvd., Montreal, QC H1G 3K7 Canada Phone: 514-324-8900 Fax: 514-324-9525 Email:
[email protected] www.ritepro.com
www.powermag.com
Rittal, 1 Rittal Place, Urbana, OH 43078 Phone: 937-399-0500 Fax: 937-390-5599 Email:
[email protected] www.rittal-corp.com See our ads on p. 40 & 41 River Consulting, LLC, 445 Hutchinson Ave., Ste. 740, Columbus, OH 43235 Phone: 614-890-3456 Fax: 614-890-1883 Email: janderson@riverconsulting. com www.riverconsulting.com Roberts & Schaefer Co., 222 S Riverside Plaza, Ste. 1800, Chicago, IL 60606 Phone: 312-236-7292 Fax: 312-726-2872 Email:
[email protected] www.r-s.com/ Rochem Technical Services, 4711 SW Huber St., Ste. 7E, Portland, OR 97219 Phone: 503-246-8618 Fax: 503-246-8697 Email: bob.auguston@rochemltd. bob.auguston@rochemltd. com www.rochemltd.com Rodney Hunt-Fontaine, 46 Mill St., Orange, MA 01364 Phone: 978-544-2511 Fax: 978-544-3928 Email:
[email protected] www.rodneyhunt.com Rolls-Royce PLC, 105 Sandusky, Mount Vernon, OH 43050 Phone: 740-393-8015 Email: jonathan.li@rolls-royce. jonathan.li@rolls-royce. com www.rolls-royce.com RoMaDyn, 1711 Orbit Way, Minden, NV 89423-4114 Phone: 775-783-0155 Fax: 775-783-4650 Email:
[email protected] [email protected] www.romadyn.com Rotek Instrument Corp., 390 Main St., P.O. Box 504504, Waltham, MA 02454 Phone: 781-899-4611 Fax: 781-894-7273 Email:
[email protected] www.rotek.com Rotex Global, 1230 Knowlton St., Cincinnati, OH 45223 Phone: 513-541-1236 Fax: 513-541-4888 Email:
[email protected] [email protected] www.Rotex.com
|
POWER December 2013
Rotork, 5607 W Douglas Ave., Milwaukee, WI 53218 Phone: 414-461-9200 Fax: 414-461-1024 Email:
[email protected] www.rotork.com Rotork Controls, Inc., 675 Mile Crossing Blvd., Rochester, NY 14624 Phone: 585-247-2304 Fax: 585-247-2308 Email:
[email protected] www.rotork.com RTDS Technologies, Inc., 100-150 Innovation Dr., Winnipeg, MB R3T 2E1 Canada Phone: 204-989-9700 Fax: 204-452-4303 Email:
[email protected] www.rtds.com Russelectric, Inc., South Shore Park, 99 Industrial Park Rd., Hingham, MA 02043 Phone: 781-749-6000 Fax: 781-749-4205 Email:
[email protected] www.russelectric.com
S S & B E ngineers and Constructors Ltd., 7809 Park Place Blvd., P.O. Box 266245, Houston, TX 77087/77207 Phone: 713-845-3176 Fax: 713-640-0045 Email:
[email protected] www.sbec.com S&C Electric Company, 6601 N. Ridge Blvd., Chicago, IL 60626 Phone: 773-338-1000 www.sandc.com S.M. Stoller Corp., 105 Technology Dr., Ste. 190, Broomfield, CO 80021 Phone: 303-546-4300 Email:
[email protected] www.stoller.com SABIA, Inc., 15070 Avenue of Science, Ste. 200, San Diego, CA 92128 Phone: 858-217-2200 Fax: 858-217-2203 Email:
[email protected] www.sabiainc.com Sabre Tubular Structures, 8653 E Hwy. 67, Alvarado, TX 76009 Phone: 817-852-1700 Fax: 817-850-1703 Email: utilityinfo@sabreindustries utilityinfo@sabreindustries.. com www.SabreTubularStructures.com
|
December 2013 POWER
Safanicu, No.134, Arbab Alley-Ahmadabad St., Esfahan, 8155637343 Kuwait Phone: 2291457 Fax: 2291457 Email:
[email protected] www.sinarayan.com
SAS Global Power (Divison of SAS Global Corp.), 21601 Mullin Ave., Warren, MI 48089 Phone: 248-414-4470 Fax: 248-414-4490 Email:
[email protected] www.sasglobalcorp.com
Scientific Instruments, 200 Saw Mill River Rd., P.O. Box 268, Hawthorne, NY 10532 Phone: 914-769-5700 Fax: 914-769-5473 Email:
[email protected] www.scientificinstrumentsny.com
SAFE Fire Detection, Inc., 5915 Stockbridge Dr., Monroe, NC 28110 Phone: 704-821-7920 Email: marvin@safefiredetection. com www.safefiredetection.com
SCHADE Lagertechnik GmbH, Dorstener Strasse 360, Herne, 44653 Germany Phone: 49232558740 Email:
[email protected] www.schade-lagertechnik.com
Scott Specialty Gases, 6141 Easton Rd., P.O. Box 310, Plumsteadville, PA 18949-0310 Phone: 215-766-8861 Fax: 215-766-2476 Email:
[email protected] www.scottgas.com
Safway Services, LLC, N19 W24200 Riverwood Dr., Waukesha, WI 53188 Phone: 262-523-6500 Email:
[email protected] [email protected] www.safway.com Saint-Gobain Ceramics & Plastics, Inc., 1 New Bond St., MS 301432, Worcester, MA 01606-2614 Phone: 508-795-2963 Fax: 508-795-5011 Email:
[email protected] www.refractories.saint-gobain.com Salem Stainless Steel Suppliers PVT Ltd., 33, Lawyer Chinna Thambi St. Kondithope, Chennai, 600079 India Phone: 044-23463000 Fax: 044-25207353 Email:
[email protected] www.ssssgroup.com Sanford Rose Opportunity Ce nter, nter, 265 S Main St., Akron, OH 44308 Phone: 330-762-6211 Fax: 330-762-6161 Email:
[email protected] www.sraoc.com Santee Cooper, 1 Riverwood Drive, Moncks Corner, SC 29461 Phone: 843-761-8000 www.santeecooper.com
Sargent & Lundy, LLC, 55 East Monroe St., Chicago, IL 60603 Phone: 312-269-2000 Fax: 312-269-3680 Email:
[email protected] www.sargentlundy.com
Scheck Industries, 500 E Plainfield Rd., Countryside, IL 60525 Phone: 708-482-8100 Fax: 708-482-8185 Email:
[email protected] www.gosccheck.com Schenck Trebel Corp., 535 Acorn St., Deer Park, NY 11729 Phone: 631-242-4010 Fax: 631-242-8715 Email: bernard.bohnhorst@ schenck-usa.com www.schenck-usa.com/index.asp Schmidt + Clemens GmbH + Co. KG, Edelstahlwerk Kaiserau, Kaiserau 2, D- 51789 Lindlar, Germany Phone: +49 2266 92-0 Fax: +49 2266 92-370 Email: in
[email protected] [email protected] www.schmidt-clemens.de
Schmidt Industries, 3290 Patterson Rd., Bay C ity, MI 48706 Phone: 989-684-3216 Fax: 989-684-3228 Email:
[email protected] www.schmidtindustries.com Schonstedt Instrument Co., 100 Edmond Rd., Kearneysville, WV 25430 Phone: 304-725-1050 Fax: 304-725-1095 Email:
[email protected] www.schonstedt.com Schutte & Koerting, 2510 Metropolitan Dr., Trevose, PA 19053 Phone: 215-639-0900 Fax: 215-639-1597 Email:
[email protected] www.s-k.com
www.powermag.com
C O M P A N Y D I R E C T O R Y
SDS Power Co. Ltd., 1805 Founder Tower, Tower, 1122 New Jinqiao Road, Pudong, Shanghai, 200135 China Phone: 0086-21-61052072 Email:
[email protected] www.sdspower.com;www.sdscommerce.com Sealeze, 8000 Whitepine Road, North Chesterfield, VA 23237 Phone: 804-275-1675 Fax: 804-743-3413 www.sealeze.com Securicon, LLC, 5520 Cherokee Ave., Ste. 230, Alexandria, VA 22312 Phone: 703-914-2780 ext 101 Fax: 703-914-2785 Email:
[email protected] www.securicon.com seepex, Inc., 511 Speedway Dr., Enon, OH 45323 Phone: 937-864-7150 Fax: 937-864-7157 Email:
[email protected] www.seepex.com Sefar AG, Hinterbissaustrasse 12, Heiden, 9410 Switzerland Phone: 41718985700 Email:
[email protected] [email protected] www.sefar.com Sega, Inc., 16041 Foster, P.O. P.O. Box 1000, Overland Park, KS 66085 Phone: 913-681-2881 Email:
[email protected] www.segainc.com Selkirk Corp., 5030 Corporate Exchange Blvd. SE, Grand Rapids, MI 49512 Phone: 800-992-VENT Fax: 877-393-4145 Email:
[email protected] www.selkirkcorp.com/commercialand-industrial/
93
Y R O T C E R I D Y N A P M O C
Senior Flexonics Pathway, 2400 Longhorn Industrial Dr., New Braunfels, TX 78130 Phone: 830-629-8080 Fax: 830-629-6899 Email: s
[email protected] [email protected].. com www.myej.com Sensor Developments, Inc., 1050 W Silver Bell Rd., Orion, MI 48359 Phone: 248-391-3000 Fax: 248-391-0107 Email: sales@s endev.com endev.com www.sendev.com
Sentry Equipment Corp., 966 Blue Ribbon Circle North, Oconomowoc, WI 53066 Phone: 262-567-7256 Fax: 262-567-4523 Email:
[email protected] www.sentry-equip.com Separator Spares & Equipment, LLC, 144 Intracoastal Dr., Houma, LA 70363 Phone: 985-346-0122 Fax: 985-346-0244 Email: info@separatorequipment. com www.separatorequipment.com Sera ProDos GmbH, Sera-Strasse 1, Immenhausen, 34376 Germany Phone: 49 (0) 5673 999-02 Fax: 49 (0) 5673 999-03 Email:
[email protected] www.sera-web.com Shawcity Ltd., 91-92 Shrivenham Hundred Business Park Watchfield, Oxfordshire, Oxfordshire, SN6 8TY United Kingdom Phone: 1793780622 Email:
[email protected] www.shawcity.co.uk Shell Lubricants, 700 Milam St., Houston, TX 77002 Phone: 713-546-8038 Fax: 713-423-8203 Email:
[email protected] Sick Maihak, Inc., 4140 World Houston Pkwy., Ste. 180, Houston, TX 77032 Phone: 281-436-5100 Fax: 281-436-5200 Email:
[email protected] www.sicknorthamerica.com 94
Sidi Kerir Petrochemicals Co., Kilo 36 Alex-Cairo Road, A lexandria lexandria Egypt, Alex, 1416 Egypt Phone: 20121189877 Fax: 4770126 Email:
[email protected] www.sidpec.com
Signal-X-Press Concept, 12, Industrial Crescent Ilupeju Recreation Hall, Ilupeju, 23401 Nigeria Email:
[email protected] www.signalxpressconcept.com
Siemens AG, I IA A S PA CIS KarlLegien-Str. 190, Bonn, 53117 Germany Phone: +49 228 64805210 Fax: +49 228 64805125 Email:
[email protected] www.siemens.com/comos
Silicon Power Corp., 275 Great Valley Pkwy., Malvern, PA 19355 Phone: 610-407-4705 Fax: 610-407-3688 Email:
[email protected] www.siliconpower.com
SNC Manufacturing, 101 West Waukau Ave., Oshkosh, WI 54902 Phone: 800-558-3325 Fax: 920-231-1090 Email:
[email protected] www.sncmfg.com
Siemens Energy, 4400 Alafaya Trl., Orlando, FL 32826 Phone: 407-736-2000 Fax: 407-736-5008 www.siemens.com/energy
Simutech Multimedia, Ste. 412, 2249 Carling Ave., Ottawa, ON K2B 7E9 Canada Phone: 613-656-1592 Fax: 613-722-2043 Email:
[email protected] www.troubleshootingskills.com
Sodimate, Inc. - Dry Chemical Feed System Specialist, 639 W Diversey Pkwy. Ste. 219, Chicago, IL 60614 Phone: 773-665-8800 Fax: 773-665-8805 Email:
[email protected] www.sodimate-inc.com
SISCO, Inc., 6605 19 1/2 Mile Rd., Sterling Heights, MI 48314 Phone: 586-254-2000 Fax: 586-254-0053 Email:
[email protected] www.sisconet.com
SoftPLC Corp., 25603 Red Brangus, Spicewood, TX 78669 Phone: 512-264-8390 Fax: 512-264-8399 Email:
[email protected] www.softplc.com
Siemens Energy, Energy, Inc. - Environmental Systems & Services, 501 Grant St., 4th Floor, Pittsburgh, PA 15219-4429 Phone: 412-572-3700 Email:
[email protected] www.energy.siemens.com/hq/en/ power-generation/environmentalsystem/ Siemens Industries, Inc., 1201 Sumneytown Pike, Spring House, PA 19477 Phone: 215-646-7400 Fax: 215-283-6343 Email:
[email protected] [email protected] www.industry.usa.siemens.com/ automation/us/en/processinstrumentation-and-analytics/ Pages/process-instrumentationand-analytics.aspx Siemens Industry, Inc. - Water Technologies Business Unit, 181 Thorn Hill Rd., Warrendale, PA 15086 Phone: 866-926-8420 Email: information.water@ siemens.com www.water.siemens.com Sierra Instruments, Inc., 5 Harris Ct., Bldg. L, Monterey, CA 93940 Phone: 800-866-0200 Fax: 831-373-4402 Email:
[email protected] www.sierrainstruments.com Sigma, Inc., 1295 Hwy. 62, Charlestown, IN 47111 Phone: 800-210-6907 Fax: 812-256-5275 Email:
[email protected] www.sigmappc.com
SKF USA, 4141 Ruffin Rd., San Diego, CA 92123-1841 Phone: 619-496-3400 Fax: 619-496-3531 www.skfcm.com SKODA JS a.s., Orlik 266, Plzen, 31606 Czech Republic Phone: +420-378 042 410 Fax: +420-377 520 600 Email:
[email protected] www.skoda-js.cz SkyFuel, Inc., 18300 West Hwy. 72, Arvada, CO 80007 Phone: 303-330-0276 Fax: 866-422-1292 Email:
[email protected] www.skyfuel.com SMA America, 6020 West Oaks Blvd., Ste. 300, Rocklin, CA 95765 Phone: 916-625-0870 Fax: 916-625-0871 Email:
[email protected] www.sma-america.com See our ad on p. 15 Smith & Loveless, Inc., 14040 Santa Fe Trail Dr., Dr., Lenexa, KS 66215 Phone: 913-888-5201 Email:
[email protected] www.smithandloveless.com
www.powermag.com
SMS Energy-Engineering, Inc., Ste. 201, 447 Speers Rd., Oakville, ON L6K 3S7 Canada Phone: 905-845-5148 Fax: 905-845-8007 Email:
[email protected] www.smsenergy-engineering.com
Sohre Turbomachinery, Turbomachinery, Inc., I nc., 128 Main St., Monson, MA 01057 Phone: 413-267-0590 Fax: 413-267-0592 Email:
[email protected] www.sohreturbo.com Solar Turbines, Inc., 2200 Pacific Hwy., San Diego, CA 92186 Phone: 619-544-5352 Fax: 619-544-2444 Email:
[email protected] www.solarturbines.com SolarBOS, Inc., 310 Stealth Ct., Livermore, CA 94551 Phone: 925-456-7744 Fax: 925-456-7710 Email:
[email protected] www.solarbos.com SolarDock, P.O. P.O. Box 711, Wilmington, DE 19899 Phone: 302-504-0124 Fax: 302-225-8716 Email:
[email protected] www.solardock.com
|
POWER December 2013
Solberg Filtration & Separation, 1151 Ardmore Ave., Itasca, IL 60143 Phone: 630-616-4411 Fax: 630-773-0727 Email:
[email protected] www.solbergmfg.com Sologic, LLC, 2501 Washington St., 2nd Floor, Midland, MI 48642 Phone: 425-225-5885 Email:
[email protected] www.sologic.com Solon Manufacturing Co., 425 Center St., P.O. Box 207, Chardon, OH 44024 Phone: 440-286-7149 Email:
[email protected] www.solonmfg.com SOLVAir SOLVAir Solutions/Solvay Chemicals, Inc., 3333 Richmond Ave., Houston, TX 77098 Phone: 713-525-6500 Fax: 713-525-6759 Email:
[email protected] www.solvair.us SOR, Inc., 14685 West 105th St., Lenexa, KS 66215-5964 Phone: 913-888-2630 Fax: 913-888-8150 Email:
[email protected] www.sorinc.com
Sound Technologies, 310 Commerce Sq., Michigan City, IN 46360 Phone: 2198792600 x3409 Email:
[email protected] www.soundtech.us
Southern Environmental, 6690 W Nine Mile Rd., Pensacola, FL 32526 Phone: 850-944-4475 Fax: 850-944-8270 Email:
[email protected] www.southernenvironmental.com Southern Research, 500 Southland Dr., Ste. 238, Birmingham, AL 35226 Phone: 205-978-8630 Fax: 205-978-8675 Email:
[email protected] www.southernresearch.org
|
December 2013 POWER
Southwell Industries, 265 Arch St., Laguna Beach, CA 92651 Phone: 949-497-6051 Fax: 949-497-6665 Email:
[email protected] www.southwellindustries.com Southwest Microwave, Inc., 9055 S McKemy St., Tempe, AZ 85284 Phone: 480-783-0201 Fax: 480-783-0401 Email: infossd@
[email protected] www.southwestmicrowave.com/ssd Span-O-Matic, 825 Columbia St., Brea, CA 92821 Phone: 714-256-4700 Fax: 714-245-4401 Email:
[email protected] www.spanomatic.com Specialized Safety Products, Inc., 4321 W Knox Ave., Chicago, IL 60641 Phone: 773-777-7100 Fax: 773-777-0909 Email:
[email protected] www.specializedsafetyproducts.com Spinwave Systems, Inc., 235 Littleton Rd., Westford, MA 01886 Phone: 978-392-9000 Fax: 978-692-8400 Email:
[email protected] www.spinwavesystems.com Spirax Sarco, Inc., 1150 Northpoint Blvd., Blythewood, SC 29016 Phone: 803-714-2000 Fax: 803-714-2222 Email:
[email protected] www.spiraxsarco.com/us SPL WorldGroup, Inc., 525 Market St., 33rd Fl, San Francisco, CA 94150 Phone: 415-963-5600 Fax: 415-963-5601 Email:
[email protected] www.splwg.com Spraying Systems Co., North Ave. at Schmale Rd., P.O. P.O. Box 7900, Wheaton, IL 60189 Phone: 630-517-1494 Fax: 630-260-9727 Email:
[email protected] [email protected] www.spray.com SPX Cooling Technologies, Inc., 7401 W 129 St., Overland Park, KS 66213 Phone: 913 664 7400 Email:
[email protected] www.spxcooling.com
SPX Flow Technology, Technology, 611 Sugar Creek Rd., Delavan, WI 53115 Phone: 800-252-5200 Fax: 800-252-5012 www.spxprocessequipment.com
StatSoft, Inc. / STATISTICA, STATISTICA, 2300 East 14th St., Tulsa, OK 74104 Phone: 918-749-1119 Email:
[email protected] www.statsoftpower.com
SRC Greenpower PVT Ltd., 222, Sidco Industrial Estste Ambuttur, Chennai, 600098 India Phone: 28586999 Email: ganesh@srcgreenpower. ganesh@srcgreenpower. com www.srcgreenpower.com
STEAG Energy Services, LLC , P.O. P.O. Box 1727, 304 Linwood Rd., Ste. 102, Kings Mountain, NC 28086 Phone: 704-734-0688 Fax: 704-734-1088 Email:
[email protected] www.steag.us
SRP, P.O. Box 52025, KYS102, Phoenix, AZ 85079-2025 Phone: 602-236-8754 Fax: 602-685-3271 Email:
[email protected] www.investmentrecovery.srpnet.com
Sterling Energy International, 26893 Calle Hermosa, Capistrano, CA 92624 Phone: 949-248-2017 Email:
[email protected] www.Sterling-Energy.com
SS Power Systems, 2 Corporate Dr., Ste. 430, Shelton, CT 06484 Phone: 203-926-9388 Fax: 203-926-9720 Email: j.hochstein@shock-system. com www.shock-system.com
Sterling Lumber Co., 3415 W 127th St., Blue Island, IL 60406 Phone: 708-388-2223 Email:
[email protected] [email protected] m www.sterlinglumber.com
SSS Clutch Co., Inc., 610 W Basin Rd., New Castle, DE 19720 Phone: 302-322-8080 Fax: 302-322-8548 Email:
[email protected] [email protected] www.sssclutch.com St. Lawrence Steel, 2500 Crane Centre Dr., Streetsboro, OH 44241 Phone: 800-837-3789 Fax: 330-562-1100 Email: dharvanek@stlawrencesteel. dharvanek@stlawrencesteel. com www.stlawrencesteel.com Stainless & Nickel Alloys, LLC, 217 Deer Park Trail, Canton, GA 30114 Phone: 678-880-7880 Fax: 704-521-4460 Email:
[email protected] www.S&N.com Stanley Consultants, Inc., 225 Iowa Ave., Muscatine, IA 52761 Phone: 800-553-9694 Fax: 563-264-6658 Email:
[email protected] www.stanleyconsultants.com STAR & STAR Field Fit, Inc. (Steam Turbine Alternative Resources), 116 Latourette St., Marion, OH 43302 Phone: 740-387-5535 Fax: 740-383-2089 Email:
[email protected] www.starturbine.com
www.powermag.com
C O M P A N Y D I R E C T O R Y
Sterling Strips Ltd., 2/10, Meghal Industrial Estate, Devidayal Road, Mulund (West), Mumbai, 400 080 India Email:
[email protected] www.sterlingstripsltd.com STF S.p.A., Via Robecco 20, Magenta, 20013 Italy Phone: 02-972091 Fax: 02-9794977 Email:
[email protected] www.stf.it See our ad on p. 20 Stock Equipment Co., 16490 Chillicothe Rd., Chagrin Falls, OH 44023-4398 Phone: 440-543-6000 Fax: 440-543-5944 Email:
[email protected] www.stockequipment.com Stock Fairfield Corp., 16490 Chillicothe Rd., Chagrin Falls, OH 44023 Phone: 440-543-6000 Fax: 440-543-3936 Email: don.wolf@stockequipment. com www.stockequipment.com Stork H&E Turbo Blading, Inc., 334 Comfort Rd., Ithaca, NY 14850 Phone: 607-277-4968 x292 Fax: 607-277-1193 Email:
[email protected] www.he-machinery.com
95
Y R O T C E R I D Y N A P M O C
Storm Copper Components, 240 Industrial Dr., P.O. Box 99, Decatur, TN 37322 Phone: 423-506-4178 Email:
[email protected] www.stormgrounding.com
Summit Filter Corp., 20 Milltown Rd., Union, NJ 07083 Phone: 800-321-4850 Fax: 908-687-4202 Email:
[email protected] www.summitfilter.com
SuperPower, SuperPower, Inc., 450 Duane Ave., Schenectady, Schenectady, NY 12304 Phone: 518-346-1414 Fax: 518-346-6080 Email:
[email protected] www.superpower-inc.com
StormwateRx, 122 SE 27th Ave., Portland, OR 97214 Phone: 800-680-3543 Email:
[email protected] www.stormwaterx.com
Summit Training Source, 4170 Embassy Dr. SE, Grand Rapids, MI 49546 Phone: 800-842-0466 Fax: 616-949-5684 Email:
[email protected] www.safetyontheweb.com
SW Funk Industrial Contractors, Contractors, Inc., 1710 W Hundred Rd., Chester, VA 23836 Phone: 804-748-0461 Fax: 804-748-0474 Email:
[email protected] www.swfunk.com
SUN Technical Services, 60 Industrial Park Rd., Plymouth, MA 02360 Phone: 800-225-0385 Fax: 508-746-3113 Email:
[email protected]
Swagelok Co., 31500 Aurora Rd., Solon, OH 44139 Phone: 440-349-5934 Fax: 440-349-5843 Email: publicrelations@swagelok. com www.swagelok.com
Structural Integrity Associates, Associates, Inc., 5215 Hellyer Ave., Ste. 210, San Jose, CA 95138 Phone: 877-474-7693 Fax: 704-597-0335 Email:
[email protected] www.structint.com See our ad on p. 13 Struthers Wells, 10375 Slusher Dr., Santa Fe Springs, CA 90670 Phone: 323-726-0641 Fax: 323-726-9592 Email:
[email protected] www.strutherswells.com Sturtevant, 348 Circuit St., Hanover, Hanover, MA 02339 Phone: 781-829-1433 Fax: 781-829-1463 Email:
[email protected] www.sturtevantinc.com STYL&TECH, 1-2435 Watt Ave., Quebec, QC G1P 3X2 Canada Phone: 418-656-1661 Email:
[email protected] [email protected] www.stylntech.com SUBNET Solutions, Inc., #100, 4639 Manhattan Rd. SE, Calgary, AB T2G 4B3 Canada Phone: 403-270-8885 Fax: 403-270-9631 Email:
[email protected] www.SUBNET.com Sullair, 3700 E Michigan Blvd., Michigan City, IN 46360 Phone: 219-879-5451 Fax: 219-874-1267 Email: sullairsolutions@sullair
[email protected] .com www.sullair.com Sulzer Turbo Services, 11518 Old Laporte Rd., La Porte, TX 77571 Phone: 713-567-2700 Fax: 713-567-2830 Email: sulzertshouston@sulzer
[email protected] .com www.sulzerts.com
96
Sunrise Systems Ltd., Sunrise Business Park, Ely Rd., Waterbeach, Cambridge, TX CB25 9QZ United Kingdom Phone: +44 1223 441311 Email:
[email protected] www.sunrise-sys.com SUNRNR of Virginia, Inc., P.O. Box 102, Port Republic, VA 24471 Phone: 540-271-3403 Fax: 540-433-7253 Email:
[email protected] [email protected] www.sunrnr.com Super Radiator Coils, 451 Southlake Blvd., Richmond, VA VA 23236 Phone: 804-378-1300 Fax: 804-379-2118 Email:
[email protected]@superradiatorcoils.com www.superradiatorcoils.com Superbolt, Inc., 1000 Gregg St., Carnegie, PA 15106 Phone: 412-279-1149 Email:
[email protected] www.superbolt.com Superior Interlock Corp., 7339 Central Ave., Glendale, NY 113858202 Phone: 718-821-8949 Fax: 718-417-6162 Email: info@superiorinterloc
[email protected] k.com www.superiorinterlock.com Superior Water Screen Co., Inc., 28230 Orchard Lake Rd., Ste. 204, Farmington Hills, MI 48334 Phone: 248-419-5322 Email:
[email protected] www.superiorwaterscreens.com
Swan Analytical USA, 225 Larkin Dr., Unit 4, Wheeling, IL 60090 Phone: 847-229-1290 Fax: 847-229-1320 Email: sales@swan-analytical-usa. com www.swan-analytical-usa.com Sword CTSpace, 49 Stevenson St., Ste. 950, San Francisco, CA 94105 Phone: 415-882-1888 Fax: 415-882-1888 Email:
[email protected] www.sword-ctspace.com Synergy, Synergy, 1982 Ohio S t., Lisle, IL 60532 Phone: 630-724-1960 Fax: 630-724-1969 Email:
[email protected] [email protected] www.synsysinc.com Syscom Instruments S.A., Rue de L’Industrie 21, Sainte-Croix, CH1450 Switzerland Phone: 314-361-5084 (USA) Email:
[email protected] www.syscom.ch
T Tapeswitch Corp., 100 Schmitt Blvd., Farmingdale, NY 11735 Phone: 800-234-8273 Fax: 631-630-0442 Email:
[email protected] [email protected] www.tapeswitch.com
www.powermag.com
Tatman Associates, Inc., P.O. Box 39400, 29015 Solon Rd., Solon, OH 44139-0400 Phone: 440-248-0644 Fax: 440-248-0649 Email:
[email protected] www.tatmansubstations.com Taylor Technologies, Technologies, Inc., 31 Loveton Circle, Sparks, MD 21152 Phone: 800-TEST-KIT Fax: 410-771-4291 Email:
[email protected] www.taylortechnologies.com TEAM Industrial Services, 200 Hermann Dr, Alvin, TX 77511 Phone: 281-331-6154 www.teamindustrialservices.com See our ad on p. 17 Tech Center, Center, 265 S Main S t., Akron, OH 44308 Phone: 330-762-6212 Fax: 330-762-2035 Email:
[email protected] www.techcenterinc.com Tech Products, Products, Inc., 105 Willow Ave., Staten Island, NY 10305 Phone: 718-442-4900 Email: team@te chproducts.com chproducts.com www.techproducts.com Techinomics Inc., 1382 Old Freeport Rd, Pittsburgh, PA 15238 Phone: 412-963-7300 Fax: 412-291-1054 Email:
[email protected] www.techinomics.com Technical Services Group, Inc., P.O. Box 140268, Edgewater, CO 80214 Phone: 720-232-7107 Fax: 303-462-0318 Email:
[email protected] Technology Transfer Services, 14497 North Dale Mabry Hwy., Ste. 120N, Tampa, FL 33618 Phone: 813-908-1100 Email:
[email protected] [email protected] www.techtransfer.com TEi Construction Services, Inc., 170 Tucapau Rd., Duncan, SC 29334 Phone: 864-485-0600 Fax: 864-485-0655 www.babcockpower.com TEi Services, 201 North 4th Ave., Royersford, PA 19468 Phone: 610-948-5400 Fax: 610-948-5779 www.teiservices.com
|
POWER December 2013
Temp-Pro, Inc., 200 Industrial Dr., Northampton, MA 01060 Phone: 413-584-3165 Email:
[email protected] [email protected] om www.temp-pro.com Terrington Data Management, IT Centre, York Science Park Heslington, York, YO10 5NP United Kingdom Phone: +44 (0)1904 567674 Fax: +44 (0)1904 567719 Email:
[email protected] www.terringtondm.com Teseq, 52 Mayfield Ave., Edison, NJ 08837 Phone: 732-225-9533 Fax: 732-225-4789 Email:
[email protected] www.teseq.com Tesla Energy Solutions, 36068 Hidden Springs Rd., Ste. C - 119, Wildomar, Wildomar, CA 92595 Phone: 888-583-7525 Fax: 888-837-6086 Email: damberson@teslaenergyllc. com www.teslaenergyllc.com Testo, Inc., 40 White Lake Rd., Sparta, NJ 07871 Phone: 800-227-0729 Fax: 862-354-5020 Email:
[email protected] www.testo.com Thaker Simulation Technologies, 57 W Farms Rd., Canaan, NH 03741 Phone: 603-632-3767 Fax: 603-632-4546 Email:
[email protected] www.thakerllc.com Thayer Scale-Hyer Industries, Inc., 91 Schoosett S t., Pembroke, MA 02359 Phone: 781-826-8101 Fax: 781-826-7944 Email:
[email protected] www.ThayerScale.com The Avogadro Group, LLC, 2825 Verne Roberts Circle, Antioch, CA 94509 Phone: 877 602 1023 Fax: 925-680-4416 Email:
[email protected] www.avogadrogroup.com
|
December 2013 POWER
The Conklin Sherman Co, Inc., 59 Old Turnpike Rd., Beacon Falls, CT 06403 Phone: 203-881-0190 Fax: 203-881-0178 Email:
[email protected] www.conklin-sherman.com The David Wood Co., P.O. Box 87875, Vancouver, WA 986877875 Phone: 360-260-0979 Fax: 360-253-5292 Email:
[email protected] www.powerindustrycareers.com The Dow C hemical Co., P.O. Box 1206, Midland, MI 48642 Phone: 989-832-1560 Fax: 989-832-1465 Email:
[email protected] [email protected] www.dow.com The Graphic Works, 1141 Dithridge Dr., Johnstown, PA 15905 Phone: 814-255-6417 www.TheGraphicWorksUSA.com The Halvorsen Co., 7500 Grand Division Ave., Garfield Heights, OH 44125 Phone: 216-341-7500 Fax: 216-341-7557 Email:
[email protected] www.halvorsenusa.com The International Brotherhood of Boilermakers, 753 State Avenue, Kansas City KS 66101 Phone: 913-371-2640 www.boilermakers.org The Protectowire Co., Inc., P.O. P.O. Box 200, Hanover, MA 02359 Phone: 781-826-3878 Fax: 781-826-2045 Email:
[email protected] www.protectowire.com The Proudfoot Co., P.O. Box 276, Monroe, CT 06468 Phone: 203-459-0031 Fax: 203-459-0033 www.soundcell.biz The Ripley Co., 46 Nooks Hill Rd., Cromwell, CT 06416 Phone: 860-635-2200 Fax: 860-635-3631 www.ripley-tools.com The Silchem Group, P.O. Box 231487, Encinitas, CA 92923 Phone: 760-798-4390 Fax: 901-328-1427 Email:
[email protected] www.silchem.com
The Solid Waste Authority of Palm Beach County, 7501 North Jog Rd., West Palm Beach, FL 33412 Phone: 561-640-4000 Fax: 561-640-3400 Email:
[email protected] www.swa.org The Stellar Group, 2900 Hartley Rd., Jacksonville, FL 32257 Phone: 904-260-2900 Fax: 904-268-4932 Email:
[email protected] [email protected] www.thestellargroup.com The Tata Power Co. Ltd., Registered Office Bombay House 24, Homi Mody St., Fort Mumbai, 400001 India Phone: 022-6655-8282 Fax: 022-6665-8801 Email:
[email protected] www.tatapower.com The Utility FPE Group, Inc. (Plant Risk Engineering), 15937 Swindon Ct., Midlothian, VA 23112 Phone: 540-729-0095 Fax: 804-378-3357 Email:
[email protected] www.ufpeg.com Thermal Engineering Associates, 1424 Farrington Dr., Knoxville, TN 37923 Phone: 865-357-2002 Fax: 865-357-2002 Email:
[email protected] www.thermalea.com Thermal Engineering International (USA), Inc., 10375 Slusher Dr., Santa Fe Springs, CA 90670 Phone: 323-726-0641 Fax: 323-726-9592 Email:
[email protected] www.thermalengint.com Thermal Instrument Co., 217 Sterner Mill Rd., Trevose, PA PA 19053 Phone: 215-355-8400 Fax: 215-355-1789 www.thermalinstrument.com Thermal Kinetics, 667 Tifft St., Buffalo, NY 14220 Phone: 716-826-3836 Fax: 716-826-3853 Email:
[email protected] www.thermalkinetics.net
www.powermag.com
ThermaSteel Corp., 847 S Randall Rd., Ste. 191, Chicago, IL 60123 Phone: 224-400-8134 Email:
[email protected] www.thermasteelcorp.com Thermo Scientific, 166 Cummings Center, Beverly, MA 01915 Phone: 978-232-6228 Email: sara.whyte@thermofisher sara.whyte@thermofisher.. com www.thermoscientific.com/water Thielsch Engineering, 8761 Mayfield Rd., Ste. 308, Chesterland, OH 44026 Phone: 440-729-8866 Fax: 440-729-8060 Email:
[email protected] www.thielschfes.com
C O M P A N Y D I R E C T O R Y
ThirdPartyInspections.com, ThirdPartyInspections.com, 559 Union Church Rd., Elkton, MD 21921-3135 Phone: 410-620-0392 Fax: 270-573-3594 Email:
[email protected] www.thirdpartyinspections.com Thomas & Betts, 8155 T&B Blvd., Memphis, TN 38125 Phone: 305-842-4240 Fax: 800-888-0690 Email: monica.perez-therese@ tnb.com www.tnb.com Ti Anode Fabricators Pvt Ltd., 48, Noothanchary, Noothanchary, Madambakkam, Selaiyur, Chennai, 600073 India India Phone: 0091 44 22781148 Fax: 0091 44 22781362 Email:
[email protected] [email protected] www.tianode.com Tioga Air Heaters, 9201 International Pkwy., Minneapolis, MN 55428 Phone: 763-525-4000 Fax: 763-525-9796 Email:
[email protected] www.tioga-inc.com Tioga Pipe Supply Co., Inc., 2450 Wheatsheaf Ln., Philadelphia, PA 19137 Phone: 215-831-0700 Fax: 215-533-1645 Email:
[email protected] TITAN Rail, Inc., One East Merchants Dr., Ste. 304, Oswego, IL 60543 Phone: 630-892-9020 Fax: 630-892-9090 Email:
[email protected] www.titanrail.com
97
Y R O T C E R I D Y N A P M O C
TLT-Babcock, 260 Springside Dr., Akron, OH 44333 Phone: 330-867-8540 Fax: 330-869-4819 www.tltbabcock.com Topographic Imaging, Inc., 11211 Katy Freeway, Ste. 625, Houston, TX 77079 Phone: 713-973-8676 Fax: 713-973-8670 Email: colemanj@lidarmapping. colemanj@lidarmapping. com www.lidarmapping.com Toshiba International Corp., 6623 West Washington St., West Allis, WI 53213 Phone: 414-475-2800 Email: mark.mcneely@psd. toshiba.com Toshiba International Corp., Power Systems Div., 6 Dickinson Dr., Bldg. 300, Ste. 2, Chadds Ford, PA 19317 Phone: 610-361-9300 Fax: 610-459-7846 Email: in
[email protected] [email protected] Total Power Ltd., 6450 Kestrel Rd., Mississauga, ON L5T 1Z7 Canada Phone: 905-670-1535 Email:
[email protected] www.totalpower.ca Tower Elevator Systems, Inc., 900 RR 620 South, C206, Lakeway, TX 78734 Phone: 512-266-6200 Fax: 512-266-6210 Email:
[email protected] [email protected] www.towerelevators.com Tower Performance, Inc., 23 Vreeland Rd., Florham Park, NJ 07932 Phone: 800-314-1695 Fax: 970-472-1304 Email: jfritz@towerperformance. com www.coolingtowercomponents. com Trachte Prefabricated Buildings, 422 N Burr Oak Ave., Ave., Oregon, WI 53575 Phone: 608-835-5707 Fax: 608-835-3920 Email:
[email protected] [email protected] www.trachteusa.com Tradewinds Power Corp., 5820 NW 84 Ave., Miami, FL 33166 Phone: 305-592-9745 Fax: 305-592-7461 Email:
[email protected] www.tradewindspower.com
98
Transfer Bulk Systems, 600 W Roosevelt Rd., B2, Wheaton, IL 60187-2302 Phone: 630-784-9671 Fax: 775-659-1598 Email:
[email protected] www.transferbulksystems.com Trans-Global Trans-Global Distributions, 357, 10654 82 Ave., Edmonton, AB T6E 2A7 Canada Phone: 780 907 2929 Fax: 780 433 5706 Email:
[email protected] [email protected] www.tgdtrading.ca Transocean Equipment Management, LLC, P.O. Box 53924, Fayetteville, NC 28305 Phone: 910-483-7828 Fax: 910-483-7876 Email:
[email protected] Transoceancontainers.net Tranter, 1900 Old Burk Hwy., Wichita Falls, TX 76306 Phone: 940-723-7125 Fax: 940-723-1131 Email:
[email protected] www.tranter.com Tranter International AB, P.O. Box 17233, SE-10462 Maria Skolgata 79B, Stockholm, Stockholm, SE-118 53 Sweden Phone: +46-8-442 49 70 Fax: +46-8-442 49 80 Email:
[email protected] www.tranter.com
Tricor Metals, 3225 West Old Lincoln Way, Wooster, OH 44691 Phone: 330-264-3299 Fax: 330-262-6678 Email:
[email protected] [email protected] www.tricormetals.com
Turnell Corp., 17269 Wild Horse Creek Rd. Ste. 220, Chesterfield, MO 63005 Phone: 314-971-0920 Email:
[email protected] www.turnellcorp.com
Trinity Industries, Inc., P.O. Box 568887, Dallas, TX 75356-8887 Phone: 214-589-8529 Fax: 214-589-8553 Email:
[email protected] [email protected] www.trin.net
Turner Business Services, LLC, 1300 Gladolas Dr., Winter Park, FL 32792 Phone: 407-927-6517 Email: turnerbizservices@gmail. turnerbizservices@gmail. com
Triple-S Steel Supply, P.O. Box 21119, 6000 Jensen Dr., Houston, TX 77226 Phone: 713-697-7105 Fax: 713-697-5945 Email:
[email protected] [email protected] www.sss-steel.com
Tuthill Energy Systems, Millbury Industrial Park, P.O. Box 8000, Millbury, MA 01527-8000 Phone: 508-756-8391 Fax: 508-754-4516 www.tuthill.com
Tuf-Lok International, P.O. Box 5078, Madison, WI 53705 Phone: 608-270-9478 Fax: 608-270-2080 Email:
[email protected] www.tuflok.com Turbine Energy Solutions, LLC, 4627 N Sam Houston Pkwy. E, Houston, TX 77032 Phone: 281-227-0090 Fax: 281-227-0098 Email: sales@
[email protected] www.turbineenergysolutions.com
TVC Systems, 284 Constitution Ave., Portsmouth, NH 03801 Phone: 603-431-5251 Fax: 603-431-8909 Email:
[email protected] [email protected] www.tvcsystems.com TWR Lighting, Inc./Orga Aviation, 4300 Windfern Rd., Ste. #100, Houston, TX 77041 Phone: 713-973-6905 Fax: 713-973-9352 Email:
[email protected] [email protected] www.twrlighting.com Tyco Flow Control, See Pentair Valves & Controls, Pasadena, TX 77507 Phone: 832-261-2416 Email: ssdcustomercare@
[email protected] www.pentair.com/valves
TRAX, LLC, 107 Vista Centre Dr., Forest, VA 24551-2601 Phone: 434-385-7250 Fax: 434-385-8233 Email:
[email protected] www.traxcorp.com
Turbine Generator Maintenance, Inc., 4635 Coronado Pkwy., Cape Coral, FL 33914 Phone: 239-549-7500 Fax: 239-549-0767 Email: teamtgm@
[email protected] www.turbinegenerator.com
TRC - Nuclear Generation Services, 14 Gabriel Dr., Augusta, ME 04330 Phone: 207-620-3862 Fax: 207-621-8226 Email:
[email protected] [email protected] www.trcsolutions.com
Turbo Parts, LLC, 767 Pierce Rd., Ste. 2, Clifton Park, NY 12065 Phone: 518-885-3199 Fax: 518-885-3072 Email:
[email protected] www.turbopartsllc.com
U. S. Metals, 19102 Gundle, Houston, TX 77073 Phone: 281-443-7473 Fax: 281-443-6748 Email:
[email protected] www.usmetals.com
Trent Tube, 2015 Energy Dr., East Troy, WI 53120 Phone: 262-642-7321 Fax: 262-642-9571 Email:
[email protected] www.trent-tube.com
TurboCare, Inc., 2140 Westover Rd., Chicopee, MA 01022 Phone: 413-593-0500 Fax: 413-593-3424 Email:
[email protected] www.turbocare.com
Triangle Enterprises, Inc., 3630 Cairo Rd., Paducah, KY 42001 Phone: 270-443-2424 Email:
[email protected] [email protected] www.triangle-co.com
TurboGen Consultants, Inc., 78 South Trooper Rd., Norristown, PA 19403 Phone: 610-631-3480 Fax: 610-631-3481 Email:
[email protected] [email protected] www.turbogen.net
U.S. Underwater Services, LLC, 123 Sentry Dr., Mansfield, TX 76063 Phone: 800-860-2178 Fax: 817-447-0021 Email:
[email protected] www.usunderwaterservices.com
www.powermag.com
U
UBE, 261 Madison Ave., 28th Floor, New York, NY 10016 Phone: 212-551-4700 Email:
[email protected] www.ube.com
|
POWER December 2013
Ukraine Partnership Bureau, 84, Balzaka Str. App.116, Kiyv, 2232 Ukraine Phone: 677397425 Fax: 677397425 Email:
[email protected] www.uapb.eu Ultraflo Corp., A subsidiary of BRAY International, Inc., P.O. Box 423, Ste. Genevieve, MO 63670 Phone: 573-883-8881 Fax: 573-883-8882 Email:
[email protected] [email protected] www.ultraflovalve.com Ultramax Corp., 110 Boggs Ln., Ste. 325, Cincinnati, OH 45246 Phone: 513-469-8629 Email:
[email protected] [email protected] www.ultramax.com Unimar, Inc., 4944 Verplank Rd., P.O. Box 220, Clay, NY 13041 Phone: 315-699-4400 Fax: 315-699-3700 Email:
[email protected] www.unimar.com Unitech Power Technology Co. Ltd., 9126 Richards Dr., Mentor, OH 44060 Phone: 440-257-3504 Email:
[email protected] www.ut-power.com United Conveyor Corp., 2100 Norman Dr. West, Waukegan, IL 60085 Phone: 847-473-5900 Fax: 847-473-5959 Email:
[email protected] www.unitedconveyor.com United Dynamics Corp., 2681 Coral Ridge Rd., Brooks, KY 40109 Phone: 502-957-7525 Fax: 502-957-5441 Email:
[email protected] www.udc.net
United Rentals, 5 Greenwich Office Park, Greenwich, CT 06831 Phone: 203-618-7185 Fax: 203-622-4325 Email:
[email protected] www.unitedrentals.com Universal Analyzers, Inc., 5200 Convair Dr., Carson City, NV 89706 Phone: 775-883-2500 Fax: 775-883-6388 Email: marketing@
[email protected] www.universalanalyzers.com Universal Flow Monitors, I nc., 1755 E Nine Mile Rd., P.O. Box 249, Hazel Park, MI 48030 Phone: 248-542-9635 Fax: 248-398-4274 Email:
[email protected] www.flowmeters.com Universal Utility Services, LLC, P.O. Box 30608, 2900 NE Sixth, Amarillo, TX 79120 Phone: 806-378-4186 Fax: 806-378-4196 Email:
[email protected] www.uus-llc.com UnseenHeroes, P.O. Box 726, Artesia, CA 90703 Phone: 760-985-4376 Email:
[email protected] www.unseenheroes.com URS, Power Business Unit, 510 Carnegie Ctr, Ctr, Princeton, NJ 08543 Phone: 609-720-2000 Fax: 609-720-2050 www.urscorp.com Utility Consultants, Inc., 1810 Water Pl., Ste. 200, Atlanta, GA 30339 Phone: 770-955-9922 Fax: 770-955-9955 www.ucinc.net
United Electric Controls, 180 Dexter Ave., Watertown, MA 02472 Phone: 617-926-1000 Email:
[email protected] [email protected] www.ueonline.com
Utility Equipment Leasing Corp., N4 W22610 Bluemound Rd., P.O. Box 177, Waukesha, WI 53186 Phone: 262-547-1600 Fax: 262-544-8546 Email:
[email protected] www.uelc.com
United Fiberglass of America, Inc., P.O. Box 1511, Springfield, OH 45503 Phone: 937-325-7305 Fax: 937-325-7380 Email:
[email protected] www.unitedfiberglass.com
UTILX Corp., 22820 Russell Rd., P.O. Box 97009, Kent, WA 980649709 Phone: 253-395-0200 Fax: 253-395-1040 Email:
[email protected] [email protected] www.utilx.com
|
December 2013 POWER
V Valdes Engineering Co., 100 West 22nd St., Lombard, IL 60148 Phone: 630-792-1886 Fax: 630-792-1986 Email:
[email protected] [email protected] www.valdeseng.com
Vallourec Heat Exchanger Tubes, Inc., 5501 Air Park Blvd., Morristown, TN 37813 Phone: 423-587-1888 Fax: 423-585-4215 Email:
[email protected] [email protected] www.vallourec.com Valmont Industries, Structures Div., 7002 N 288th St., Valley, NE 68064 Phone: 402-359-2201 Fax: 402-359-6221 Email:
[email protected] [email protected] www.valmont.com Valquest Systems, 351 S Sherman Ste. 100, Richardson, TX 75081 Phone: 972-234-2954 Email:
[email protected] [email protected] www.valquest.net Valvesearch.com, P.O. Box 85, Malvern, PA 19355 Phone: 484-320-8043 Email:
[email protected] [email protected] www.valvesearch.com
Ventyx, an ABB Co., 400 Perimeter Center Ter., Ste. 500, Atlanta, GA 30346 Phone: 678-830-1000 Email:
[email protected] www.ventyx.com Vericor Power Systems, 3625 Brookside Pkwy., Ste. 500, Alpharetta, GA 30022 Phone: 770-569-8838 Fax: 770-569-7524 Email:
[email protected] www.vericor.com Verizon, One Verizon Way, Basking Ridge, NJ 07920 Phone: 800-526-3178 www.verizon.com VERSITRON, Inc., 83-C Albe Dr., Newark, DE 19702 Phone: 302-894-0699 Fax: 302-894-0624 Email:
[email protected] www.versitron.com VibroSyst M, 2727 E JacquesCartier Blvd., Longueuil, QC J4N 1L7 Canada Phone: 450-646-2157 Fax: 450-646-2164 Email:
[email protected] [email protected] www.vibrosystem.com Victaulic, 4901 Kesslersville Rd., Easton, PA 18040 Phone: 610-559-3300 Email:
[email protected] [email protected] www.victaulic.com
Vandal Shields, 8560 Roland St. #E, P.O. Box 434, Buena Park, CA 90621 Phone: 714-523-0572 Fax: 714-523-3328 Email:
[email protected] www.vandalshields.com
Victory Energy Operations, Operations, LLC, 10701 E 126th St. N., Collinsville, OK 74021 Phone: 918-382-4840 Fax: 918-594-7240 Email:
[email protected] [email protected] www.victoryenergy.com
VEGA Americas, Inc., 4170 Rosslyn Dr., Cincinnati, OH 45209 Phone: 800-367-5383 Email:
[email protected] www.vega-americas.com
Virtual Phone System, 30150 Telegraph Rd., Bingham Farms, MI 48025 Phone: 800-962-0126 Email:
[email protected] [email protected] www.voiceshot.com/public/vr.asp
Velan Valve Corp., 94 Ave. C, Williston, VT 05495 Phone: 514-748-7743 Fax: 514-748-8635 Email:
[email protected] www.velan.com
C O M P A N Y D I R E C T O R Y
Viryanet, 2 Willow St., Southborough, MA 01745 Phone: 508-490-8600 Fax: 508-490-8666 Email:
[email protected] www.viryanet.com
Velcon Filters, Inc., 1210 Garden of the Gods Rd., Colorado Springs, CO 80907-3410 Email:
[email protected] www.velcon.com
www.powermag.com
99
Y R O T C E R I D Y N A P M O C
Vista Control Systems, Inc., 2101 Trinity Dr., Ste. Q, Los Alamos, NM 87544-4103 Phone: 505-662-2484 Email: vista-sales@vista-contr vista-sales@vista-control. ol. com www.vista-control.com Vogt Power International, Inc., 13551 Triton Park Blvd., Ste. 2000, Louisville, KY 40223 Phone: 502-899-4500 Fax: 502-899-4690 Email:
[email protected] www.vogtpower.com Voith Turbo BHS Getriebe GmbH, Hans-Boeckler-Strasse Hans-Boeckler-Strasse 7, Sonthofen, 87527 Germany Phone: +49 8321 802-0 Fax: +49 8321 802-689 Email: in
[email protected] www.voith.com/bhs-turbo-gear
W
Wabash Power Equipment Co., 444 Carpenter Ave., Wheeling, IL 60090 Phone: 847-541-5600 Fax: 847-541-1279 Email:
[email protected] www.wabashpower.com Wahlco, Inc., 3600 W Segerstrom, Santa Ana, CA 92704 Phone: 714-979-7300 Email:
[email protected] www.wahlco.com Walters Power International, 2915 N Classen Blvd., Ste. 400, Oklahoma City, OK 73106 Phone: 405-528-2860 Email:
[email protected] www.walterspower.com
Weidmann Systems International, One Gordon Mills Way, P.O. Box 799, St. Johnsbury, VT 058510799 Phone: 802-748-3936 Fax: 802-748-8630 Email: service@
[email protected] www.weidmann-systems.com Weir Minerals, Box 7610, Madison, WI 53716 Phone: 608-221-2261 www.weirminerals.com Weir Slurry North America, 2701 S Stoughton Rd., Madison, WI 53716 Phone: 608-221-2261 Fax: 608-221-5810 Email:
[email protected] www.weirslurrygroup.com
Voith Turbo GmbH & Co. KG, Voithstr. 1, Crailsheim, 74564 Germany Phone: +49 7951 32-0 Fax: +49 7951 32-500 Email:
[email protected] www.voith.com
Warren & Baerg Manufacturing, Inc., 39950 Rd. 108, Dinuba, CA 93618 Phone: 559-591-6790 Fax: 559-591-5728 Email:
[email protected] www.warrenbaerg.com
Voith Turbo, Inc., 25 Winship Rd., York, PA 17406 Phone: 717-767-3200 Fax: 717-767-3210 Email: vti-information@voith. com www.usa.voithturbo.com
Wartsila North America, Inc., 16330 Air Center Blvd., Houston, TX 77032 Phone: 281-233-6200 Fax: 281-233-6233 Email:
[email protected] [email protected] www.wartsila.com/us
Vooner FloGard Corp., 4729 Stockholm Ct., Charlotte, NC 28273 Phone: 704-552-9314 Fax: 704-554-8230 Email:
[email protected] www.vooner.com
Watlow, 12001 Lackland Rd., St. Louis, MO 63146 Phone: 800-WATLOW2 Fax: 314-878-6814 Email:
[email protected] www.watlow.com
WennSoft, 1970 S Calhoun Rd., New Berlin, WI 53151 Phone: 262-821-4100 Email:
[email protected] [email protected] www.wennsoft.com
Watthour Engineering Co, 333 Crosspark Dr., Pearl, MS 39208 Phone: 601-933-0900 Fax: 601-933-0901 Email:
[email protected] www.watthour.com
Weschler Instruments, 16900 Foltz Pkwy., Cleveland, OH 44149 Phone: 440-238-2550 Fax: 440-238-0660 Email:
[email protected] www.weschler.com
Waukesha Bearings Corp., W231N2811, Ste. 200, Pewaukee, WI 53072 Phone: 262-506-3000 Email:
[email protected] [email protected] www.waukeshabearing.com
WesTech Engineering, 3665 S West Temple, Salt Lake City, UT 84115 Phone: 801.265.1000 Fax: 801-265-1080 Email:
[email protected] [email protected] www.westech-inc.com/en-usa
Vulcan Iron Works, Inc., 400 3rd Ave., Ste. 100, Kingston, PA 18704-5816 Phone: 717-822-2161
100
WebLayers, Inc., 100 Cambridge Park Dr., 3rd Floor, Cambridge, MA 02140 Phone: 617-500-7620 Email:
[email protected] www.weblayers.com
Welding Technologies, 2330 Centennial Dr., Gainesville, GA 30504 Phone: 877-935-3832 Fax: 770-297-6511 Email:
[email protected] [email protected] www.weldingtechnologies.com Weldstar Co., 1750 Mitchell Rd., Aurora, IL 60505 Phone: 630 859 3100 Fax: 630 859 3199 Email:
[email protected] www.weldstar.com
www.powermag.com
Western Integrated Technologies, 13406 SE 32nd St., Bellevue, WA 98005 Phone: 425-747-0927 Fax: 425-747-0940 Email:
[email protected] [email protected] www.westernintech.com Westfalia Separator, Inc., Mineral Oil Div., 100 Fairway Ct., Northvale, NJ 07647 Phone: 201-767-3900 Fax: 201-767-3416 Westinghouse Westinghouse Electric Co., 1000 Westinghouse Dr., Cranberry Township, PA 16066 Phone: 412-374-2558 Fax: 724-940-8518 Email: rossmams@westinghouse. com www.westinghousenuclear.com Weston Solutions, Inc., 1400 Weston Way, West Chester, Chest er, PA 19380 Phone: 610-701-3000 Email: wes.fritz@westonsolutions. com www.emissionstestingsolutions. com WH Salisbury & Co, 7520 N Long Ave., P.O. Box 1060, Skokie, IL 60077 Phone: 847-679-6700 Fax: 847-679-2401 www.whsalisbury.com Wheelwash USA, P.O. Box 810607, Boca Raton, FL 33481 Phone: 561-750-8662 Fax: 561-750-9507 Email:
[email protected] [email protected] www.WheelwashUSA.com WIKA Instrument Corp. - Electrical Temperature Division, 950 Hall Ct., Deer Park, TX 77536 Phone: 713-475-0022 Fax: 713-475-0011 Email:
[email protected] [email protected] www.wika.com WIKA Instruments Canada Ltd., 3103 Parsons Rd., Edmonton, AB T6N 1C8 Canada Phone: 780-463-7035 Fax: 780-462-0017 Email:
[email protected] www.wika.ca
|
POWER December 2013
William Frick & Co., 2600 Commerce Dr., Libertyville, IL 60048 Phone: 847-918-3808 Fax: 847-918-3701 Email:
[email protected] www.fricknet.com Williams Metals and Welding Alloys, Inc., 125 S trafford Ave., Ste. 108, Wayne, PA 19087 Phone: 877-499-1544 Email:
[email protected] www.wmwa.net Williamson Corp., 70 Domino Dr., Concord, MA 01742 Phone: 978-396-9607 Fax: 978-369-5485 Email:
[email protected] www.williamsonir.com Wilmore Electronics Co, Inc., 607 US 70-A East, P.O. Box 1329, Hillsborough, NC 27278 Phone: 919-732-9351 Fax: 919-732-9359 Email: info@wilmoreelectronics info@wilmoreelectronics.. com www.wilmoreelectronics.com Winco, Inc., 225 South Cordova Ave., Le Center, MN 56057 Phone: 507-357-6821 Fax: 507-357-4857 Email:
[email protected] www.wincogen.com Winsted Corp., 10901 Hampshire Ave. South, Minneapolis, MN 55438 Phone: 800-237-5606 Fax: 770-840-9685 Email:
[email protected] www.winstedcustom.com Winters Instruments, 600 Ensminger Rd., Buffalo, NY 14150 Phone: 716-874-8700 Fax: 716-874-8800 Email:
[email protected] www.winters.com Wiznucleus, Inc., 244 Fifth Ave., Ste. K227, New York, NY 10001 Phone: 646-367-1947 x 501 Email:
[email protected] www.wiznucleus.com Wolf Material Handling Systems, 12680 Industrial Blvd., Elk River, MN 55330 Phone: 763-576-9040 Fax: 763-576-9070 Email:
[email protected] www.wolfmhs.com
|
December 2013 POWER
Wood Group GTS, 15600 John F Kennedy Blvd., Ste. 500, Houston, TX 77032 Phone: 281-227 5600 Fax: 281-227 5655 Email:
[email protected] www.woodgroup.com Woodward GmbH, Handwerkstr. Handwerkstr. 29, Stuttgart, 70656 Germany Phone: +49 (0) 711 789 54-0 Fax: +49 (0) 711 789 54-1 Email:
[email protected] www.woodward.com WorleyParsons Group, Inc., 2675 Morgantown Rd., Reading, PA 19607 Phone: 610-855-2000 Fax: 610-855-2602 Email:
[email protected] www.worleyparsons.com WPC, Inc., 10907 Downs Rd., Charlotte, NC 28134 Phone: 704-927-4000 Fax: 704-927-4001 Email:
[email protected] www.wpceng.com WRB Communications, 4200 Lafayette Center Dr., Chantlly, Chantlly, VA 20151 Phone: 703-449-0520 Email:
[email protected] www.wrbcorp.com
X Xdot Engineering and Analysis, PLLC, 370C Greenbrier Dr., Charlottesville, VA 22901 Phone: 434-972-9368 Email:
[email protected] www.xdotea.com Xenics, Ambachtenlaan 44, Leuven, 3001 Belgium Phone: +3216 389900 Email:
[email protected] www.xenics.com Xtralis, 700 Longwater D r., Norwell, MA 02061 Phone: 800-229-4434 Email:
[email protected] www.xtralis.com
Y Yeomans Pump - Div. Yeomans Chicago Corp., P.O. Box 6620, 3905 Enterprise Ct., Aurora, IL 60598-0620 Phone: 630-236-5500 Fax: 630-236-5511 Email:
[email protected] www.yeomanspump.com Yieh Corp., No.6, E-DA Rd., Yanchao Town, Kaohsiung County, 82445 Taiwan Phone: 88676151000 Fax: 88676153000 Email:
[email protected] www.yieh.com Yokogawa Yokogawa Corporation of America, 2 Dart Rd., Newnan, GA 30265 Phone: 770-254-0400 Fax: 770-251-2088 Email: meters-instr@ us.yokogawa.com www.yokogawa-usa.com/
Zinkan Enterprises, Inc., 1919 Case Pkwy. North, Twinsburg, OH 44087 Phone: 800-229-6801 Email:
[email protected] www.zinkan.com Zollern GmbH & Co. KG, Hitzkofer Strasse 1, Sigmaringendorf, Sigmaringendorf, 72517 Germany Phone: +49 7571 70-0 Fax: +49 7571 70-602 Email:
[email protected] www.zollern.com
C O M P A N Y D I R E C T O R Y
Zolo Technologies, Inc., 4946 North 63rd St., Boulder, CO 80301 Phone: 303-604-5800 Fax: 303-530-1843 Email:
[email protected] www.zolotech.com ZSI, 45065 Michigan Ave., Canton, MI 48188 Phone: 800-323-7053 Fax: 734-844-0066 Email:
[email protected] www.zsi-inc.com
Yuba Heat Transfer, Transfer, 2121 N 161 E Ave., Tulsa, OK 74116-4802 Phone: 918-234-6000 Fax: 918-437-3429
Z Zachry Engineering Corp., 101 West Colfax Avenue #500 Denver, CO 80202 Phone: 303-928-4400 www.zhi.com Zensol Automation, Inc., 7075 Place Robert-Joncas, Ste. 139, St. Laurent, QC H4M 2Z2 Canada Phone: 514-333-3488 Fax: 514-333-3499 Email:
[email protected] www.zensol.com
Zequanox (by Marrone Bio Innovations), 2121 second Street B-107, Davis, CA 95618 Phone: 530-750-2800 Email: zequanox@marronebio. zequanox@marronebio. com www.zequanox.com
www.powermag.com
101
PRODUCTS DIRECTORY ACI SYSTEMS FOR MERCURY CONTROL
ANALYZERS, HYDROGEN ANALYZERS, PURITY
Imeco Limited
10 H2-cooled Power Generators
Tesla Energy Solutions
Hitech Instruments
ADA Environmental Solutions
AIRFLOW MEASUREMENT MEASUREMENT,, COMBUSTION
Breen Energy Solutions
Enerac, Inc
Clyde Bergemann Power Group
PROMECON USA Inc.
ACOUSTICS
Y R O T C E R I D T C U D O R P
AIR PREH EA EATER TER BASKETS SUPPLY
Testo Inc.
ALARMS
1 Acoustics - General 10 Instrumentation 15 Noise abatement, transformers transformers 20 Panels
Kistler-Morse Corp
Hawk Measurement (10)
The Protectowire Co Inc
SKF USA
Hessler Associates, Inc. (1) Sound Technologies (1,15,20)
ALIGNMENT SYSTEM SHAFT
Nova Analytical Systems Inc. (10)
ANALYZERS, WATER-PURITY 1 Analyzers, water-purity - General 10 Alkalinity 20 Boron 30 Calcium hardness 40 Chloride 50 Hydrazine 60 Hydrogen 70 Oxygen 80 Silica 90 Sodium 100 Sulfide Camarines sur Polytechnic college CHEMetrics, Inc.
The Proudfoot Company
10 Laser 20 Dial indicator
ACTUATORS
Elos Fixturlaser AB
Metrohm-Peak
AZZ | N L I
LUDECA, INC.
Mettler-Toledo Thornton, Inc.
Beck, Harold Beck & Sons Inc
Machinery Mounting Solutions, Inc. (10,20)
Orbeco Analytical Systems Inc
Blac Inc.
Scientific Instruments
Compact Automation Products LLC
ALIGNMENT SYSTEMS TURBINE COMPONENT
Flowserve
Alignment Supplies, Inc.
Rotork Voith Turbo GmbH & Co. KG
ADDITIVES, COAL 10 Coal-pile binders 20 Dust-suppression agents 30 Freeze-conditioning agents 40 Slag modifiers
Hach
ANALYZERS, ANAL YZERS, AIR-POLLUTION 1 Analyzers, air-pollution - General 10 CO, CO2 20 Continuous emissions monitors 30 HCL 40 HF 50 Hydrocarbons 60 Hydrogen sulfide 70 NH3 80 NO, NOx 100 SO2 and/or SO3 110 Stack-gas
Sentry Equipment Corp (1,40,50,60,70,80,90) Swan Analytical USA Taylor Technologies Inc (1,10,20,30,40,50,80,90,100) Thermo Scientific
ARRESTERS CITEL SURGE PROTECTION
ASH-HANDLING SYSTEMS
10 Basket testers
Emerson Process Management, Rosemount Analytical
Dueco Inc
ENOTEC Inc. (1,10,20,110)
Hinkel Equipment Rental Associates, Inc.
FilterSense
1 Ash-handling systems - General 10 Air washers 20 Blowers 30 Ceramic lined pipe 40 Clinker grinders (crushers) 50 Combining tubes 60 Conveyors 70 Coolers 80 Dewatering bins 90 Exhausters 100 Feeders 110 Fluidizers 120 Jet ash pumps 140 Receiver/separators (air/ash) 150 Rotary unloaders 160 Sluice pumps 170 Storage bins 180 Storage tanks
Nesco Sales & Rentals
HORIBA (1,10,20,50,60,70,80,100,110)
Allen-Sherman-Hoff (1,30,40,60,70,80)
ANALYZERS, ANAL YZERS, AIR-QUALITY
AVA Americas, LLC./AVA-Huep GmbH u. Co. KG (1,70,110)
1 Analyzers, air-quality - General
Clyde Bergemann Power Group
ENMET Corporation (1)
Detroit Stoker Company (40,150) See our ad on p. 51
Benetech (10,20,30,40)
ADDITIVES, FUEL-OIL Jiangsu High Hope International Group Co. Ltd
Air Instruments & Measurements LLC CEMTEK Environmental
AERATORS
Cosa Instrument Corp, Process Control Div
Nol-Tec Systems, Inc. See our ad on p. 49
Delta Instrument LLC (10,20,30,40,50,60,70, 80,100,110) Ducon Technologies Inc, MIP Div
AERIAL LIFTS
Phenix Technologies Inc (10) Utility Equipment Leasing Corp
Pragmatics Hydrogen Hydrogen Leak Detection
Diamond Power International Inc (1,30,40,60,70,80) 102
www.powermag.com
|
POWER December 2013
Ducon Technologies (1)
CTI Power/Chicago Tube & Iron Company
Hitachi Power Systems America Ltd. (1,10,40)
FLSmidth Inc. (1,20,60,100,120,150)
Greens Power Equipment USA Inc. (20)
Indeck Power Equipment Company
Helmick Corporation (40,50,90,120)
Indeck Power Equipment Company
Nat-Com
National Conveyors Company Inc
Rentech Boiler Systems, Inc
Riley Power Inc (10,20,30,40,60,90)
Nol-Tec Systems, Inc. See our ad on p. 49
BOILERS
Philippi-Hagenbuch, Inc.
Factory Sales & Engineering, Inc.
United Conveyor Corporation (1,10,20,30,40,50,60,80,90,100,110, 120,140,150,160,170,180)
Greens Power Equipment USA Inc.
BURNERS, SUPPORT EQUIPMENT
Indeck Power Equipment Company
Forney Corporation
STF spa See our ad on p. 20
Frederick Cowan & Co Inc
BAGHOUSES Buell APC Clyde Bergemann Power Group Global Power Supply MCNS Environmental Systems Inc. Southern Environmental
Vulcan Iron Works Inc
Victory Energy Operations, LLC
BUS
Wabash Power Equipment Company
1 Bus - General 10 Aluminum/copper
BOILERS, FLUIDIZED-BED
EMS Industrial and Service
AE&E Austria GmbH & Co KG
MDF Cable Bus Systems (1,10)
Energy Products of Idaho
Williams Metals and Welding Alloys Inc (10)
Metso Power
BAGS Summit Filter Corporation
BATTERIES/CHARGERS La Marche Mfg. Co.
BEARINGS 1 Bearings - General 30 Sleeve babbitt 40 Sleeve, bronze 50 Thrust, special 60 Magnetic Bently Pressurized Bearing Co Fusion Babbitting Co. Inc (30)
STERLING STRIPS LTD
Delta Unibus Division
Babcock Power Inc.
Delta/Unibus, Div. of Powell Electrical Systems
BOILERS, UTILITY
MDF Cable Bus Systems (1)
Babcock Power Inc.
Applied Bolting Portland Bolt & Manufacturing SCHMIDT INDUSTRIES
igus® Inc.
Lista International Corp.
Kingsbury Inc
BRUSHES
Renewal Parts Maintenance
Cutsforth Products Inc. See our ad on p. 53
SCHMIDT INDUSTRIES
Sohre Turbomachinery Inc
ZOLLERN GmbH & Co. KG
FrenchCreek Production, Inc.
BLADE MANUFACTURING
SCHMIDT INDUSTRIES
BURNERS
Tuthill Energy Systems
1 Burners - General 10 Coal, pulverized 20 Gas, natural 30 Management Systems 40 NOx, low 50 Oil 60 Orimulsion 90 Waste fuels
BOILER PARTS
Detroit Stoker Company (40) See our ad on p. 51
20 Pressure and non-pressure parts
Faber Burner Company
AIR SYSTEMS LIMITED
Fuel Tech Inc. (1,20,40,50)
SCHMIDT INDUSTRIES
BLOWERS Clyde Bergemann Power Group
|
December 2013 POWER
CABLE 600 V-34.5 KV safanicu
CABLE ACCESSORIES 10 Fittings & connectors ZSI (10)
CABLE LAYERS Dow Electrical & Telecommunications Telecommunications
CABLE SUPERCONDUCTING Parmar Metals Pvt. Ltd.
BUCKETS Columbia Steel Casting Co, Inc
BELTS BEL TS SAFETY/TOOL
BUSHINGS/BUSHING WELLS SCHMIDT INDUSTRIES
BOLTS
BOXES TOOL/PICK-UP TRUCK
Waukesha Bearings Corporation (1,50,60)
1 Bus duct - General
BOILERS, INDUSTRIAL
Graphite Metallizing Corp, Graphalloy Division
Mechanical Dynamics & Analysis, Ltd. (1,30,40,50)
BUS DUCT
P R O D U C T D I R E C T O R Y
www.powermag.com
CABLE TERMINA TERMINATIONS/ TIONS/ SPLICES 20 Potheads 30 Splice kits, distribution 40 Splice kits, transmission 50 Stress cone kits Thomas & Betts (20,30,40,50)
CABLE, TELECOMMUNICATIONS Calvert Wire & Cable Corporation
CABLE, TRANSMISSION SNC Manufacturing
103
CALIBRATION CALIBRA TION EQ UIPMENT Beamex, Inc.
CAPACITORS/CONTROLS LCR Electronics Valquest Systems
Zequanox (by Marrone Bio Innovations)
CHILLERS AZZ | N L I
Belzona Western Ltd.
Commonwealth Dynamics, Inc.
BHI Energy (1,30,40) See our ad on p. 1
Hadek Protective Systems
1 Castings - General 10 Ferrous
Hamon Custodis, Inc.
Columbia Steel Casting Co, Inc (1,10)
Oak Park Chimney
Hoffmann, Inc
Hillscape, Inc. (1)
CATALYST Y R O T C E R I D T C U D O R P
Zequanox (by Marrone Bio Innovations)
Hayden Laser Services, LLC (1) International Paint
CIRCUIT BREAKERS, HIGH VOLTAGE VOLT AGE Belyea Company Inc (1)
Haldor Topsoe Inc.
Carling Technologies
Hypercat Advanced Catalyst Products
Pennsylvania Breaker LLC
Corrpro Companies, Inc. Norton Corrosion Ltd
CIRCUIT BREAKERS, LOW VOLTAGE VOLT AGE 1 Circuit breakers, low voltage - General 10 Air-magnetic 20 Moulded case 30 Sulfur hexafluoride (SF6) AZZ | N L I (1,10,20,30)
CENTRIFUGES
ITW Devcon Futura Coatings Kingfisher Industrial Master Bond, Inc. NSP Specialty Products (1,30,40) Praxair Surface Technologies, Inc. (1,30) The Silchem Group
COGENERATION SYSTEMS, COGENERATION PACKAGED 2G - CENERGY Power Systems Technologies Technologies Inc. Alturdyne American DG Energy Inc. Centrax Limited
Bird Machine Co
CLOTHING, PROTECTIVE
KMPT AG
10 Glove testing, electric
COILS & BARS
KMPT USA, Inc.
DragonWear
10 High-voltage
Separator Spares & Equipment, LLC
Phenix Technologies Inc (10)
National Electric Coil (10)
Westfalia Separator Inc, Mineral Oil Div
WH Salisbury & Co
CHEMICALS, FLUE-GAS DESULFURIZATION
CLUTCHES
COMBUSTERS AE&E - Von Roll Inc
10 Reagents
1 Clutches - General 10 Automatic
SOLVAir SOLVAir Solutions/Solvay Chemicals, Inc. (10)
Voith Turbo GmbH & Co. KG (1,10)
COMBUSTION AIRFLOW MEASUREMENT
SSS Clutch Company Inc
AMETEK Land, Inc. LPP Combustion LLC
CHEMICALS, TURBOMACHINERY
COAL FEEDERS
ECT Inc
10 Gravimetric
FP Turbomachinery
Bedeschi America, Inc
Rochem Technical Services
Stock Equipment Company (10) THAYER SCALE-HYER INDUSTRIES, INC.
Shawcity Limited
COMBUSTION-CONTROL SYSTEMS Beck, Harold Beck & Sons Inc DURAG GROUP
CHEMICALS, WA WATERTERTREATMENT
COAL-CLEANING EQUIPMENT
Eutech Scientific Engineering
Ashland Water Technologies, Drew I ndustrial
Coal Recovery Investments Ltd
IMR Inc
Buckman Laboratories Inc, Water Technologies
104
Ellison Surface Technologies (1) Hadek Protective Systems (1,10,30,40)
Fuel Tech Inc.
Advance Products & Systems
Duromar Inc
Ti Anode Fabricators Pvt Ltd
1 Circuit breakers, high voltage - General
CATHODIC CA THODIC P ROTECTION
CMP Coatings, Inc.
Furnace Mineral Products Inc. (30)
DAEYOUNG C & E CO., LTD.
Johnson Matthey Catalysts LLC
Blome International
CHLORINATORS
CoaLogix
Cormetech, Inc. See our ad on p. 9
1 Coatings - General 10 Insulating 30 Protective 40 Sealing
CHIMNEYS
CASTINGS
Northern Cast parts Company Inc
COATINGS
Indeck Power Equipment Company
GC3 Specialty Chemicals, Inc.
COAL-SAMPLING/ANALYSIS SYSTEMS
The Dow Chemical Company
Thermo Scientific www.powermag.com
Marathon Sensors Inc
|
POWER December 2013
Ergonomic Office Chairs by United Group, Inc. (5)
CONTROLLERS (ENERGY MANAGEMENT)
COMPUTER-AIDED-DESIGN EQUIPMENT (CAD)
10 Demand 20 Load 30 Power-factor
Infolytica Corp
E / SYSTEMS (10,20,30)
Aitech Defense Systems
COMPUTERS
Alcatel-Lucent
GETAC Inc.
CONTROLLERS (KEY MEASUREMENTS)
E.A.R., Inc.
Panasonic Computer Solutions Co
BinMaster Level Controls
EtherWAN Systems
CONDENSERS
H&L Instruments (1,20,50,60)
40 Surface
CONTROLLERS, PROGRAMMABLE
MEN Micro Inc
Ambassador Heat Transfer Co (40)
I.C.M.I.(Inductive Components Mfg.,Inc.)
SISCO, Inc. (60)
LYNN Engineered Engineered Systems LLC
SoftPLC Corporation
VERSITRON Inc
Niagara Blower Company
COMPRESSORS
CONDENSERS, TWO PLUG
1 Compressors - General
The Conklin Sherman Co, Inc
COMMUNICATIONS SYSTEM S/ COMMUNICATIONS EQUIPMENT 1 Communications systems/equipment General 20 Fiber-optics 50 Modems 60 Networking products
Elma Systems Division
Air Engineering Inc. Atlas Copco Compressors LLC Bauer Compressors Inc.
CONVERTERS Wilmore Electronics Co, Inc
CONVEYOR ACCESSORIES
CONDUIT
1 Conveyor accessories - General
United Fiberglass of America Inc
ASGCO Manufacturing, Inc. Benetech
Jenny Products (1)
CONNECTORS
C.U.E., Inc.
sera ComPress GmbH
Amphenol Industrial Operations
Flexco
Aries Electronics DMC Power
Martin Engineering (1) See our ad on p. 54
Hubbell Power Systems, Inc
CONVEYOR DRIVES
J Custon Supply, Inc
10 Hydrodynamic Hydrodynamic
COMPUTER SOFTWARE 30 Environmental compliance 60 Maintenance management 90 Operations & maintenance 100 Performance monitoring 110 Piping systems Automation Technology, Inc CD-adapco
Voith Turbo GmbH & Co. KG (10)
CONTROL SYSTEMS 1 Control systems - General 10 Compressor 30 Gas-turbine 40 Main plant
CONVEYORS
Clyde Bergemann Power Group
1 Conveyors - General 10 Belt 20 Drag 30 Flight 40 High-angle 50 Pneumatic 60 Rentals
Diamond Power International Inc (1)
Allen-Sherman-Hoff (1,10,20,50)
Infor
Emerson Process Management, Power & Water Solutions
Beltservice de Mexico
Intergraph Corporation
Enercon Engineering Inc
Mainsaver
Environment One Corporation
Conveyor Services/Classic Conveyor Components
NeuCo, Inc.
Gastops Ltd
Siemens AG
GE Energy
SPL WorldGroup, Inc
Innovative Control Systems, Inc.
Sunrise Systems Ltd (110)
Invensys
Terrington Data Management (30,60,90,100)
Machine Control Systems
Ultramax Corporation Ventyx, an ABB company (60,90)
Mechanical Dynamics & Analysis, Ltd. (1,30,40)
Wiznucleus, Inc.
TVC Systems
CYME International T&D Eagle Technology Inc EchoMail Inc Ecutel Systems ENOSERV, LLC HTRI
P R O D U C T D I R E C T O R Y
ABB Inc (1,30) Allen-Sherman-Hoff (1)
BEUMER Maschinenfabrik GmbH & Co. KG
E-ZLIFT Portable Conveyors (1,10,20,30,40,60) Fenner Dunlop Americas Flexco Engineered Systems Group
Martin Engineering See our ad on p. 54 Nol-Tec Systems, Inc. See our ad on p. 49 Transfer Bulk Systems
Voith Turbo GmbH & Co. KG (1,10,30)
COMPUTER TERMINALS/ KEYBOARDS/PRINTERS 5 Control Room Furniture
|
December 2013 POWER
www.powermag.com
105
COOLING TOWERS
Hitachi Power Systems America Ltd.
Beck, Harold Beck & Sons Inc
DRYERS
Jarret Inc
1 Dryers - General
BIS Both Industrial Services BV
Keco Engineered Controls
AVA AVA Americas, LLC./AVA-Huep LLC./AVA-Huep GmbH u. Co. KG (1)
DAMPERS
Kahn & Company Inc
GEA Heat Exchangers - Cooling Tower Solutions Division (1,10,20,30,40) Midwest Towers Paharpur Cooling Towers Ltd See our ad on p. 23 Parker Hannifin- Precision Cooling Systems Division (1) SPX Cooling Technologies, Inc Thermal Kinetics Tower Performance, Performance, Inc. (1,20)
CORROSION CONTROL 10 Inhibitors 20 Monitors 30 Protection
DAMPER ACTUA ACTUATORS TORS
1 Dampers - General 10 Guillotine 20 Louvers 30 Special-design Braden Mfg LLC Clyde Bergemann Bachmann (1,10,20,30)
DUCT BURNERS John Zink Hamworthy Combustion
DUCT JOINTS, EXPANSION Energy Systems Products
Clyde Bergemann Power Group McDermott Brothers Products
DUCT SEALANT
Senior Flexonics Pathway
American Polywater Corp
DATA ACQUISITION/ MANAGEMENT
DUCT WORK Moon Fabricating Corp.
Contec Systems DGH Corporation
DUST-COLLECTION
Corrosion Service Company Europe Ltd
Elsys Instruments
20 Systems
Cortec Corporation (10,30)
InStep Software
Airtrol, Inc.
Electrochemical Devices, Inc. (20)
Lufft USA
Benetech (20)
Hadek Protective Systems (30)
Onset
CAMCORP, Inc.
PENTA Industrial Corp. (30)
StatSoft, Inc. / STATISTICA STATISTICA
DCM Clean-Air Products, Products, Inc.
North Side Power Transmission Corp.
DEAERATORS (STEAM DEAERATORS GENERATION)
Tuf-Lok International
Indeck Power Equipment Company
Victaulic
Kansas City Deaerator
COUPLINGS
Voith Turbo GmbH & Co. KG
CRANES/DERRICKS 1 Cranes/derricks - General 5 120,000 lb overhead crane 30 Fuel-handling 40 Gantry 50 Radwaste-handling 60 Traveling, overhead Gantrex Inc. (1,30,40,50,60) Mazzella Lifting Technologies NES Rentals Remtron
DEGASIFIERS Membrana
CROSSARMS
DEHUMIDIFIERS Arid Dry by Controlled DH (I MS)
DEMINERALIZERS Pall Corporation
CRUSHERS/BREAKERS
MikroPul Nilfisk CFM
EARTH-MOVING EQUIPMENT Emtrade Intrnational Ltd
1 Economizers - General 10 Nonsteaming 20 Steaming Cain Industries, Inc. Chanute Manufacturing (1) E-Tech, Inc. (1,10,20)
DESUPERHEATERS
Greens Power Equipment USA Inc. (1,10)
Pick Heaters, Inc.
Indeck Power Equipment Company
Schutte & Koerting
EJECTORS DIGESTORS
10 Vapor
BIOFerm Energy Systems
Fox Venturi Eductors (10)
DRILLS
ELECTROSTATIC PRECIPITATORS
DIS-TRAN Wood Products, LLC GEOTEK, Inc/PUPI Crossarms
Martin Engineering See our ad on p. 54
ECONOMIZERS
SCHMIDT INDUSTRIES (5)
106
Dustex Corporation
1 Cooling towers - General 10 Dry 20 Wet, mechanical draft 30 Wet, natural draft (hyperbolic) 40 Wet/dry
Cooling Tower Depot, Inc.
Y R O T C E R I D T C U D O R P
Sturtevant (40)
Metabo Corporation
Beltran Technologies, Inc.
40 Reversible mills
DRY SCRUBBERS
Clyde Bergemann Power Group
Pennsylvania Crusher
Clyde Bergemann Power Group
Hitachi Power Systems America Ltd.
www.powermag.com
|
POWER December 2013
Nol-Tec Systems, Inc. See our ad on p. 49 PECO
C.I.Agent Solutions, LLC (1)
KE-Burgmann USA, Inc.
Lenox Instrument Company, Inc. (1,30)
Multifab Inc. Fabricators
Plant Professionals
Southern Environmental
Southern Environmental (1,40)
FABRIC FILTERS (DESIGN)
ELEVATORS
StormwateRx
1 Fabric filters (design) - General 10 Pulse-jet
Alimak Hek, Inc
ENVIRONMENTAL PRODUCTS
Clyde Bergemann Power Group
Tower Elevator Systems, Inc.
EMISSIONS-SAMPLING SYSTEMS 10 Extractive 20 In-situ
1 Environmental products - General 10 Activated Carbon ADA Carbon Solutions (10) Babcock Power Inc. Chesapeake Soda Clean, Inc.
Apex Instruments, Inc. (10,20)
Indigo Technologies
Sentry Equipment Corp (10)
Industrial Solutions International
SICK MAIHAK, Inc. (10,20)
MET - Marsulex Environmental Technologies (1)
Universal Analyzers Inc.
Stock Environmental Co.
ENCLOSURES
Zequanox (by Marrone Bio Innovations)
10 Acoustical 60 Switchgear
EQUIPMENT (SURPLUS)
CDR Systems Group
Commerce Lanes, Inc
Elma Electronic Lectrus (60) Reef Industries Inc, Griffolyn Sound Technologies (10) Span-O-Matic Trachte Prefabricated Buildings
ENERGY MANAGEMENT SYSTEMS/CONTROLS 1 Energy management systems/controls General 10 Distribution automation equipment
McGill AirClean LLC (1,10) SEFAR AG
FABRIC FILTERS (MATERIALS) Clyde Bergemann Power Group Hitachi Power Systems America Ltd.
FABRICATION 10 Metal 20 Steel CERREY SA de CV Chanute Manufacturing (20) CTI Industries, Inc. Delta Mechcons India Ltd. (20) Gill Manufacturing ltd
EQUIPMENT PARTS (REPAIR/ REPLACE)
Gremp Steel Company
1 Equipment parts (repair/replace) - Ge neral 10 Ash-handling equipment 20 Coal-handling equipment 25 Pulverizer
Liberty Steel Fabricators (10,20)
Myrex Industries
Columbia Steel Casting Co, Inc (1,10,20,25)
N.O.W. N.O.W. & Associates Inc
Conforma Clad Inc
Process Equipment/Barron Industries
HR Power
PTMW, INC
EVAPORATORS
Johnson Bros Metal Forming Co. (10,20)
Moran Iron Works Inc. (20)
Redline Industries, Inc. The Halvorsen Company
ENERGY STORAGE
1 Evaporators - General 10 Distillation 20 Falling-film 30 Thin-film 40 Vapor-compression 50 Vertical-tube
Caldwell Energy/Caldwell Tanks
Aston Evaporative Services
FlaktWoods
Energy Storage and Power
AVA AVA Americas, LLC./AVA-Huep LLC./AVA-Huep GmbH u. Co. KG (1,10,20,30,40,50)
Howden North America Inc.
ENGINES (FUEL)
LCI Corporation
TLT-Babcock
10 Dual-fuel 20 Full-diesel 30 Spark-ignitions gas
EXPANSION EXPAN SION JOINTS J OINTS 4-STAR Hose & Supply
FASTENERS (ADHESIVES, WASHERS, ETC)
Iveco Motors Of North America
Advanced Flexible Systems Inc
NORD-LOCK
Wartsila North America, Inc. (10,20,30)
Allegheny Industrial Sales Inc
Nova Machine Products, Inc.
International Business Systems (1,10) Woodward GmbH
ENVIRONMENTAL COMPLIANCE 1 Environmental compliance - General 30 NOx control 40 SOx control Basic Concepts Benetech
Braden Mfg LLC Custom Expansion Joints, Inc. ESP/Energy Systems Products, Inc Frenzelit North America
P R O D U C T D I R E C T O R Y
Tricor Metals (10)
FANS Canadian Buffalo
Industrial Marketing Systems
FEEDERS 1 Feeders - General JVI Vibratory Equipment Inc
Garlock Sealing Technologies
Sodimate, Inc. - Dry Chemical Feed System Specialist (1)
Hose Master LLC
St. Lawrence Steel
KE-Burgmann EJS
|
December 2013 POWER
www.powermag.com
107
FEEDWATER HEATERS (CLOSED)
FIRE-PROTECTION FIRE-PROTECT ION SYSTEMS
FUEL MANAGMENT
1 Fire-protection systems - General
Engineering Consultants Group, Inc.
10 High-pressure (downstream of feedpump) 20 Low-pressure (upstream of feedpump)
American Fire Technologies Inc
Fuel Purification
American Exchanger Services Pick Heaters, Inc.
DuraSystems Barriers, Inc. Fireaway Inc. (1)
FUEL-HANDLING EQUIPMENT 1 Fuel-handling equipment - General 10 Stacker/reclaimers
Thermal Engineering International (USA) Inc (10,20)
Hiller Systems, Inc.
Yuba Heat Transfer
SAFE Fire Detection, Inc.
FIBERGLASS
FLOWMETERS
Stock Fairfield Corporation
Fibergrate Composite Structures
1 Flowmeters - General 10 DP (differential pressure: orifice, venturi) 20 Nonintrusive (magnetic, resonance, ultrasonic) 30 PD (positive displacement : Dighragm rortary vane) 40 Swirl, vortex-shedding 50 Totalizers 60 Turbine 70 Variable-area (plug, rotameter)
FUEL-OIL HANDLING EQUIPMENT
FILTER Dollinger Filtration, an SPX Brand
Y R O T C E R I D T C U D O R P
Chemetron Fire Systems
GE Energy Komline-Sanderson
FILTERS (PUMPS, COMPRESSORS) Reverso Pumps, Inc.
Control Plus Inc. Emerson Process Management, Rosemount Div FCI-Fluid Components International (1,20)
Benetech (1,10) Roberts & Schaefer Company
seepex Inc.
GAS TURBINE AIR-INTAKE SYSTEMS Braden Mfg LLC Dollinger FAIST Anlagenbau GmbH Pneumafil Corp, Gas Turbine Div
FILTERS (TURBINES, DIESELS)
FLEXIM AMERICAS Corporation
1 Filters (turbines, diesels) - General 10 Fuel-oil 20 Intake-air 30 Lube-oil
FlowMeters.com
GAS TURBINE AUXILIARY SYSTEMS
McCrometer
Braden Mfg LLC
Phoenix Air Flow, Inc.
Chromalox, Inc.
ADVANCED FILTRATION FILTRATION CONCEPTS (1,20)
Photon Control
Braden Mfg LLC (20) C.C. Jensen, Inc. Oil Maintenance
Siemens Industries, Inc. (1,10,20,30,40,50,60,70)
GAS TURBINE AUXILIARY SYSTEM REPLACEMENT PARTS
Camfil Farr Power Systems
Sierra Instruments, Inc. (1,20,40)
Braden Mfg LLC
DEFITEC (FILTRATION) (FILTRATION)
Spirax Sarco, Inc.
Filtration Advantage (1)
Thermal Instrument Co
Freudenberg Filtration Technologies Technologies SE & Co. KG (20)
Universal Flow Monitors Inc Yokogawa Corporation Of America
MB Oil Filters (1,10,30) RCI Technologies Solberg Filtration & Separation Velcon Filters Inc
FILTERS, LIQUID
GAS TURBINE EXHAUST SYSTEMS Alloy Bellows a nd Precision Welding ATCO ATCO Emissions E missions Management Braden Mfg LLC
FLUE-GAS DESULFURIZATION UNITS
SELKIRK CORPORATION
40 Wet limestone
Sound Technologies Technologies
ANDRITZ Environmental Solutions Inc. Babcock & Wilcox Company See our ad on p. 7
GAS-HANDLING EQUIPMENT Advanced Specialty Gases
1 Filters, liquid - General 10 Activated-carbon 30 Polishing 50 Water intake
Hitachi Power Systems America Ltd. (40)
Clyde Bergemann Power Group
Nol-Tec Systems, Inc. See our ad on p. 49
Scott Specialty Gases
Clear Lake Filtration
Pick Heaters, Inc.
GAUGE GLASSES
Croll-Reynolds Engineering Company Inc
Powerspan Corp.
Ernst Flow Industries
Filtration & Membrane Technology, Technology, Inc. (1,10,30,50)
FUEL ANALYZERS
Kaydon Filtration
Lazar Scientific, Inc.
Hindusthan Mica Mart
King Filtration Technologies Inc
GAUGES Quest-Tec Solutions
FUEL ECONOMIZERS FILTERS, WATER
ALGAE-X International (AXI)
GAUGES PRESSURE
Orival Water Filters
Kentube
WIKA Instruments Canada Ltd. Winters Instruments
108
www.powermag.com
|
POWER December 2013
GAUGES, LIQUID-LEVEL
Mechanical Dynamics & Analysis, Ltd.
1 Gauges, liquid-level - General 10 Capacitance 30 Hydrostatic 40 Noncontact 50 Resistance
MTU Onsite Energy Corporation
GRADUATED STRAIG HTENING GRADUATED GRID
SDS Power Company Ltd
Fuel Tech Inc.
Total Power Limited Wabash Power Equipment Company
Automation Products, Inc. - DYNATROL® Division (1)
WINCO INC
Diamond Power International Inc (1)
GENERATORS, GENERA TORS, ELECTR IC
JOWA USA, Inc. (50)
1 Generators, electric - General 10 Continuous-duty 20 Standby
Orion Instruments LLC Pressure Systems, Inc
Storm Copper Components
APOYOTEC APOYOTEC (Plantas de Energía)
Qinhuangdao Qinhuangdao Huadian Survey Instrument and Controller Co.,Ltd.
ElectraWave Inc.
VEGA Americas, Inc. (1,10,30,40)
National Electric Coil (1,10) Power Source International (1,10,20)
GAUGES, STRAIN
GROUND CLAMPS/ CONNECTORS
SUNRNR of Virginia, Inc (1,20)
Sensor Developments Inc
HEAT HEA T EXCHANGER S 1 Heat exchangers - General 10 Air coolers 20 All-welded plate 30 Bare-tube 40 Economizers 50 Fin & round tube 60 Finned-tube 80 Heat-recovery 130 Shell-and-tube 140 Straight-tube 190 U-tube
GENERA GENER ATORS, HOT HOT-WATER -WATER GEARS
Alfa Laval
40 Watertube
Babcock Power Inc.
1 Gears - General 10 Engineered gear drives
Indeck Power Equipment Company
Bowman (Birmingham) Ltd
Rentech Boiler Systems, Inc (40)
Chanute Manufacturing (10,30,60,140,190)
Allen Gears Ltd Amarillo Gear Company SCHMIDT INDUSTRIES
GENERATORS, HYDROGEN GENERATORS, H YDROGEN GAS
Voith Turbo BHS Getriebe GmbH (10)
Proton OnSite
Voith Turbo GmbH & Co. KG (1,10)
Chromalox Indeck Power Equipment Company Joseph Oat Corporation Munters Corporation (20)
GENERATORS, GENERA TORS, S TEAM
Pick Heaters, Inc. Sentry Equipment Corp (1,10,60,130)
Coffman Electrical Equipment Company
1 Generators, steam - General 10 Boilers 20 Firetube 30 Heat-recovery 50 Nuclear 90 Watertube, industrial 100 Watertube, special - design 110 Watertube, utility
Mid America Engine
ANSALDO CALDAIE SPA (1,10,30,110)
MWM GmbH
Greens Power Equipment USA Inc. (1,10,20,90,100)
Voith Turbo Inc
GENERATOR, GENERA TOR, HYDRAULI C Western Integrated Technologies
GENERATOR/ENGINE GENERA TOR/ENGINE SETS, IC
Tradewinds Power Corp
GENERATOR/TURBINE SETS, GENERATOR/TURBINE GAS (GT) Belyea Company Inc Hitachi Power Systems America Ltd. International Power Machinery Co Kawasaki Gas Turbines - Americas
Hitachi Power Systems America Ltd. (1,10,30,50) Indeck Power Equipment Company
Super Radiator Coils (1,40,50,80) Tranter International AB Vallourec Heat Exchanger Tubes, Inc. (60)
HEAT RECOVERY STEAM HEAT GENERATORS GENERA TORS (HRSG S) Babcock Power Inc. Vogt Power International Inc
HEATERS COAL THAWING HEATERS (INFRARED)
MACCHI - A DIVISION OF SOFINTER SPA (1,10,30,90)
Advanced Detection Systems, LLC
Rentech Boiler Systems, Inc (1,10,30,90,100)
HEATERS, HEA TERS, AI R
Wabash Power Equipment Company (10,20,90,110)
1 Heaters, air - General 20 Tubular
Rolls-Royce plc
Armstrong-Hunt, Armstrong-Hunt, Inc. (1)
Solar Turbines Incorporated
GENERATORS/ENGINES, DIESEL
Vericor Power Systems
ABC - Diesel
Siemens Energy
P R O D U C T D I R E C T O R Y
Greens Power Equipment USA Inc. (1,20) Heatrex Inc Tioga Air Heaters
Belyea Company Inc
GENERATORS
Wabash Power Equipment Company
HEATERS, HEA TERS, ELECTRI C
BRUSH Turbogenerators Turbogenerators
Walters Power International
Watlow
Caterpillar Inc. EPG - Enginuity Portable Grid
HEATERS, THERMAL-LIQUID
Indeck Power Equipment Company
Pick Heaters, Inc.
|
December 2013 POWER
www.powermag.com
109
ProSonix Struthers Wells
HOISTS 1 Hoists - General 20 Chain 30 Lever 40 Powered Columbus McKinnon Cornerstone Material Handling Inc. Harrington Hoists, Inc. Lifting Gear Hire Corporation (1,20,30,40) Lisbon Hoist, Inc.
HUMIDIFIERS Y R O T C E R I D T C U D O R P
Atomizing Systems Inc
SMA America (10) See our ad on p. 15
LIGHTNING (EQUIPMENT) 10 Protection ERICO International Corporation (10) Positron Inc (10)
LIGHTS Genesis Lamp Corporation GulfRim Navigation
MARKERS/LABELS 1 Markers/labels - General 10 Bar codes 20 metal 30 Pipe marker tags 50 Self-adhesive InfoSight Corporation (1,10,20,30,50) Tech Products, Inc
MATERIALS-HANDLING EQUIPMENT
LEDtronics, Inc.
1 Materials-handling equipment - General 10 Railcar hopper unloaders
Rig-A-Lite
AeroGo, Inc. (1)
TWR Lighting, Inc./Orga Aviation
Airfloat, LLC
Unimar, Inc.
Allen-Sherman-Hoff (1)
AVA AVA Americas, LLC./AVA-Huep LLC./AVA-Huep GmbH u. Co. KG
LIME STONE SUPPLIERS
INSPECTION EQUIPMENT
Palmetto Depot Service’s LLC
30 Infrared AcousticEye
LIMESTONE-GRINDING SYSTEMS
Aqua-Vu
Polycorp Ltd.
Exact Metrology
AUMUND Fördertechnik GmbH B&W Mechanical Handling Ltd. Benetech (1,10) Clyde Bergemann Power Group E-ZLIFT Portable Conveyors (1,10)
Jeffrey Rader Corporation Corporation See our ad on p. 27
FARO
LININGS
KEITH Mfg. Co. (1)
Inuktun Services Ltd.
10 Duct 60 Stack
Martin Engineering See our ad on p. 54
Ceilcote Products / International Paint LLC
Metalfab, Inc.
Hadek Protective Systems (10,60)
Nol-Tec Systems, Inc. See our ad on p. 49
LOAD MANAGEMENT EQUIPMENT/SYSTEMS
Palfinger North America
IRISS (30) Karl Storz Endoscopy RF System Lab
INSULATION ( ENERGY MANAGMENT) Advanced Industrial Systems Inc.
AeroGo, Inc. ALEASOFT
INSULATION (GENERAL)
Cannon Technologies, Inc
10 Cable 20 Pipe 30 Valves and fittings 40 Vessel
Cooper Power Systems
AB Technology Group (10,20,30,40) Triangle Enterprises, Inc.
INSULATION (MATERIAL) 10 High-temperature AB Technology Group Mid-Mountain Materials, Inc. (10)
INTERLOCKS Unitech Power Technology Company, LTD
INVASIVE MUSSEL CONTROL Zequanox (by Marrone Bio In novations)
LoadBanks of America PICOR
Rotex Global SAS Global Power (Divison of SAS Global Corp.) SCHADE Lagertechnik GmbH Wolf Material Handling Systems (1)
METALS 10 Non-ferrous, processing & manufacture
LOCATORS/TRACERS b3o enviroTek
Chatham Steel Corporation Columbia Steel Casting Co, Inc LEECO STEEL, LLC
LOCKS
Lucifer Furnaces, Inc. (10)
Lockmasters USA
SALEM STAINLESS STEEL SUPPLIERS PVT LTD
Superior Interlock Corporation
METER ACCESSORIES LUBRICANTS
Milbank Mfg Co
ExxonMobil Lubricants & Petroleum Specialties (Mobil Industrial Lubricants)
Watthour Engineering Co
Phillips 66, Lubricants
METER-READING EQUIPMENT
Shell Lubricants
K-II Enterprises
INVERTERS 10 DC/AC MajorPower Corporation 110
www.powermag.com
|
POWER December 2013
METERS/INSTRUMENTS 30 Clamp-on 40 Demand 70 kWh, electronic 110 Panel 120 Power 130 Power-factor 140 Relative humidity 150 Revenue-meters 220 Watthour 480 Wattmeter Ametek Power Instruments (150) Continental Control Systems (30,40,70,120,130,150,220,480) Hanover Technical Sales, Inc. (120) HOYT ELECTRICAL INSTRUMENT WORKS INC. moisttech (140) Weschler Instruments (110) Yokogawa Yokogawa Corporation of America
Mil-Ram Technology, Technology, Inc. (1,10,20,40,70,80,90,100,110)
NUCLEAR METERS/ INSTRUMENTS
Morgan Schaffer Systems
1 Nuclear meters/instruments - General
Phenix Technologies Inc (50)
Sentry Equipment Corp (1)
Schonstedt Instrument Company Sentry Equipment Corp (1,30,160) VibroSyst M Weschler Instruments (200) Xtralis
MOTOR CONTROL CENTERS AZZ | N L I
MOTOR DRIVES (ADJUST (ADJUSTABLEABLEFREQUENCY) 1 Motor drives (adjustable-frequency) General
MIST ELIMINA ELI MINATORS TORS
Toshiba International Corp.
KIMRE, Inc.
Voith Turbo GmbH & Co. KG (1)
MOTORS
MIXERS
Baldor Electric Company See our ad on p. 21
AVA Americas, LLC./AVA-Huep GmbH u. Co. KG
Exlar Corporation
1 Monitors/detectors/indicators - General 10 Air in-leak 20 Air-pollution ambient 30 Conductivity 40 Continuous emissions (CEMS) 50 Fault locators 70 Flame 80 Gas 90 Gas, sulfur hexafluoride (SF6) 100 Gases poisonous 110 Gases, combustible 160 pH monitors 200 Transformer 220 Vibration Arizona Instrument LLC Banner Engineering CEC Vibration Products Inc. (220) ENERGY EQUIPMENTS & PRODUCTS COMPANY
MOTORS, INDUCTION (FRAMES)
NITROGEN-OXIDES CONTROL
CONTAINER, CONTAINER, d.o.o.
NUCLEAR RADWASTETREATMENT TREA TMENT EQUIPM ENT
NUCLEAR REACTORS AREVA Inc.
P R O D U C T D I R E C T O R Y
NUCLEAR REMOTE HANDLING DEVICES KTSDI LLC
HYTORC
1 Nitrogen-oxides control - General 5 Combustion modeling & NOx control 10 Low-NOx combustion systems 30 SCR catalysts 40 SCR systems 50 SNCR systems (urea, NH3)
Alstom USA
Braden Mfg LLC (40)
Gas Depot S.A.
OEM
OIL
Breen Energy Solutions Fuel Tech Inc. (5,10,30,40,50) Hitachi Power Systems America Ltd. (1,5,10,30,40) Nol-Tec Systems, Inc. See our ad on p. 49
OIL SPILL/LEAK CONTROL EQUIPMENT Andax Industries LLC InduMar Products, inc. PS International, Inc
Wahlco, Inc.
OIL-HANDLING EQUIPMENT
Heath Consultants Inc
SABIA, Inc.
5 Filtration systems Kleentek (5)
Incon IRIS Systems Inc
NUCLEAR CORE INTERNALS
KCF Technologies (220)
SKODA JS a.s.
Oil Skimmers Inc OILKLEEN, Inc.
NUCLEAR FUEL ASSEMBLIES
Metrix Instrument Co, A Roper Industries Company
NUCLEAR RADIA RADIATION TION SHIELDING
NUTS
NUCLEAR ANAL ANALYZERS YZERS
Meeco Inc
Hitachi Power Systems America Ltd.
Hyundai Heavy Industries Co.
General Monitors
K-TEK Corp
Sentry Equipment Corp (1,30)
Hitachi Power Systems America Ltd.
Munters Corporation, Mist Eliminator & Tower Packing Div
MONITORS/DETECTORS/ INDICATORS
1 Nuclear monitors/detectors/indicators General 30 Contamination
NUCLEAR PRESSURE VESSELS
Galco Industrial Electronics
Pugmill Systems, Inc
NUCLEAR MONITORS/ DETECTORS/INDICATORS
Energy and Process Corp
OVERTORQUE PROTECTORS Voith Turbo GmbH & Co. KG
PACKAGE WATERTUBE BOILER Wabash Power Equipment Company
|
December 2013 POWER
www.powermag.com
111
PACKING
POLES, DISTRIBUTION
Columbia Steel Casting Co, Inc (35)
SCHMIDT INDUSTRIES
Brown Wood Preserving Co., Inc.
Hitachi Power Systems America Ltd. (40)
STAR & STAR Field Fit, Inc. (Steam Turbine Alternative Resources)
PIPE
Wabash Power Equipment Company
POLES, STREETLIGHT Valmont Industries, Structures Div
1 Pipe - General 10 High-carbon steel 30 Ductile iron 60 Lined 70 Low-alloy steel I50 ron/steel
POLES, TRANSMISSION
Allen-Sherman-Hoff (1,10,30,50,60,70)
Sidi Kerir Petrochemicals Company
Sabre Tubular Structures
POLYMERS Interpolymer Corporation
Beetle Plastics, LLC
Y R O T C E R I D T C U D O R P
CBP Engineering Corp
POWER CENTERS
EdgenMurray
LEA International
Georg Fischer Piping Systems Ltd
Lectrus Corporation
PLANTKOREA COMPANY Price Brothers Company Tioga Pipe Supply Co. & Inc. (1,10,50,70) Triple-S Steel Supply
POWER QUALITY EQUIPMENT 1 Power quality equipment - General Electro Industries/GaugeTech (1)
PUMPS (GENERAL) 1 Pumps (general) - General 10 Ash-service 50 Dewatering 65 End suction 120 Metering 170 Rotary 190 Sewage/sludge 200 Slurry 205 Submersible 210 Sump 240 Vacuum 270 Water Andritz AG - Pumps Division CAT PUMPS Dekker Vacuum Technologies, Inc. Edwards Industrial Equipment Corp Edwards Vacuum Inc Eliminator Slurry Pumps (1,10,50,65,190,200,205,210,270)
U. S. Metals
POWER SUPPLIES
YIEH CORP.
PIPE BENDS/FABRICA BENDS/FABRICATION TION
1 Power supplies - General 10 High voltage 20 Uninterruptible
Chanute Manufacturing
Ametek, Solidstate Controls
GIW Industries Inc (1,10,50,190,200,205,210,270)
Haberberger, Haberberger, Incorporated
APC by Schneider Electric
Gorman-Rupp Co.
Mechanical & Ceramic S olutions, Inc.
Computer Power Supply
Hayward Tyler
Muns Welding and Mechanical, Inc.
Greencisco Industrial Co., Ltd (1,20)
Highpoint Sales, Inc.
MGE UPS Systems
Hydro, Inc.
Phenix Technologies Inc (10)
Indeck Power Equipment Company
Reliance industries limited
ITT Flygt Corporation
PIPE FITTINGS (MATERIALS) DYLANGroup
PIPE FITTINGS (TYPE) Anvil International
PIPE JOINTS, EXPANSION PLANT SPECIALTIES INC
PRECAST CONCRETE Precast Specialties Corp
PRESSUE RELIEF REMBE GmbH - Safety + Control
Fairbanks Morse Pump, Pentair Water Flowrox Inc. (1,120,170,190,200,240,270)
Nash, A Gardner Denver Product ProMinent Dosiertechnik GmbH Pumping Solutions, Inc. Vooner FloGard Corporation Weir Slurry North America Yeomans Pump - Div. Yeomans Chicago Corp.
PIPE SUPPORTS 1 Pipe supports - General
PRESSURE SEAL HEADS SCHMIDT INDUSTRIES
FreeWave Technologies, Inc.
Anvil Engineered Pipe Supports
HALFEN GmbH
PRESSURE VESSELS (CODE/ NON-CODE)
HALFEN USA Inc. (1)
Benjamin Company
PIPE TOOLS
PROTECTORS, INTERFERENCE, COMMUNICATION COMMUNICA TION AND RELAY R ELAY
Albert Products
ALSTOM PROJECTS INDIA LIMITED
Martin Engineering See our ad on p. 54
Binder Group Pty Ltd
E.H. Wachs Metabo
PLUGS Great Northern Products
POLE ACCESSORIES Vandal Shields
RAILROAD/RAILCAR EQUIPMENT 20 Railcar dumpers (rotary)
Beckwith Electric Co., Inc.
112
RADIOGRAPHIC EQUIPMENT
Heyl & Patterson,Inc. (20)
TITAN Rail, Inc.
PULVERIZERS 35 Parts, replacement wear 40 Roller-and-race
RECTIFIERS Corrosion Control Inc.
American Pulverizer Company www.powermag.com
|
POWER December 2013
REFRACTORY
SCALES, WEIGHING
Saint-Gobain Ceramics & Plastics, Inc
Berthold Technologies USA, LLC Hardy Process Solutions
RELAYS
Spinwave Systems, Inc
SENSORS, TEMP ERA ERATURE TURE
Basler Electric
SCR BYPASS SYSTEMS
Gas Turbine Efficiency
Clyde Bergemann Power Group
1 Sensors, temperature - General 30 RTDs (resistance temperature detectors) 40 Thermistors 50 Thermocouples
Silicon Power Corporation
ILLICA Group
RENTAL RENT AL BOILER BOIL ER
LumaSense Technologies Technologies
Indeck Power Equipment Company
SCREENS, LIQUID
Wabash Power Equipment Company
1 Screens, liquid - General 10 Bar 20 Rotating-disc 30 Traveling
WIKA Instrument Corporation - Electrical Temperature Division
Beaudrey A.S. (1,10,20,30)
Williamson Corporation
RESINS, ION EXCHANGE 1 Resins, ion exchange - Ge neral 10 Beaded Pick Heaters, Inc.
Superior Water Screen Company, Inc
RdF Corporation Temp-Pro Inc. (1,30,40,50)
SEPARATORS
Sentry Equipment Corp (1,10)
SCRUBBERS & AUXILIARIES
Industrial Magnetics, Inc.
REVERSE-OSMOSIS EQUIPMENT
1 Scrubbers & auxiliaries - General 10 Dry 20 In-duct sorbent injection 50 Spray-tower 80 Venturi
Penn Separator Corp
RIGGING EQUIPMENT
Clyde Bergemann Power Group
Sohre Turbomachinery Inc
Aeris Corp
Hitachi Power Systems America Ltd. (1,20,50,80)
SIGNAL CONDITIONERS
Komline-Sanderson (10)
Acromag, Inc.
Pick Heaters, Inc.
Lifting Gear Hire Corporation Sterling Lumber Company
Process Engineering & Manufacturing
SAMPLERS
UBE
SHAFT GROUNDING
SIGNS/FLAGS
1 Samplers - General 10 Coal 20 Liquid 30 Trace elements 40 Wastewater
SEALS (TYPE)
B & H Engineering
1 Seals (type) - General 10 Mechanical 20 Steam turbine
William Frick & Company
Hitachi Power Systems America Ltd. (1,10,20)
Jonas, Inc
John Crane Inc, Mechanical Seals Div
Mission Instruments
Mechanical Dynamics & Analysis, Ltd. (1,10,20)
1 Silencers (general) - General 10 Duct 20 Exhaust 30 Piping
Sentry Equipment Corp (1,10,20,30,40)
Paragon Airheater Technologies
SCADA 1 SCADA - General 10 Data acquisition systems 20 Remote terminal units 30 Supervisory control systems Elecsys Corp. (1,10,20,30) Metric Systems Corporation MSE-Tetragenics Open Systems International (OSI)
SECURITY EQUIPMENT/ SYSTEMS
SILENCERS (GENERAL)
Braden Mfg LLC (20) CU Services LLC (1,30) Sound Technologies (1,10,20,30)
SILENCERS ( HEA HEAT T RECOVERY)
EK Ekcessories INNER-TITE Corp Southwest Microwave, Inc. Winsted Corporation
Sound Technologies
SILOS 10 Concrete
SEISMIC EQUIPMENT
Hoffmann, Inc (10)
Syscom Instruments S.A.
SIMULATORS 10 System
SCAFFOLDING
SELECTIVE CATALYTIC REDUCTION
Atlantic Plant Services
Indeck Power Equipment Company
TRAX LLC
SUBNET Solutions Inc Vista Control Systems, Inc. (1)
BHI Energy See our ad on p. 1 Brand Energy & Infrastructure Services
SENSORS, CURRENT AND VOLTAGE VOLT AGE
Randall Industries
epro GmbH
Safway Services, LLC
Sohre Turbomachinery Inc
|
December 2013 POWER
P R O D U C T D I R E C T O R Y
www.powermag.com
RTDS Technologies Inc. (10)
SLAG REMOVAL SYSTEMS Clyde Bergemann Power Group
113
SLINGS 1 Slings - General 10 Web 20 Wire-rope
Nol-Tec Systems, Inc. See our ad on p. 49 Novinda Corporation United Conveyor Corporation
Lifting Gear Hire Corporation (1,10,20)
SPACERS SLUDGE-CONTROL EQUIPMENT
10 Cable
SOIL TESTERS WPC, Inc.
SOLAR BOILERS Y R O T C E R I D T C U D O R P
Aalborg CSP A/S
SOLAR COLLECTOR SYSTEMS SkyFuel, Inc.
Patriot Solar Group REW Solar USA SolarBOS, Inc.
SOLID-WASTE-HANDLING EQUIPMENT (INDUSTRIAL/ MUNICIPAL) 1 Solid-waste-handling equipment (industrial/municipal - General) Corrosion Engineering Magnetics Division, Global Equipment Mktg Inc
Parkline, Inc. See our ad on p. 38 SUBNET Solutions Inc.
SUBSTATIONS (MATERIALS) SPARGERS
DIS-TRAN Packaged Substations
Mott Corporation
SULFUR HEXAFLUORIDE SPRAY NOZZLES
RH Systems
Spraying Systems Co.
STACKS
SUPPORT EQUIPMENT (GENERAL)
1 Stacks - General
Chromium Corporation
Hadek Protective Systems (1) Hoffmann, Inc (1)
SURGE PROTECTORS Carzoli Engineering Sales
STOKERS, MASS-BURNING
Transtector Systems
10 Chaingrate 20 Water-cooled vibrating grate
SWITCHBOARDS
Detroit Stoker Company (10,20) See our ad on p. 51
Keystone Electrical Manufacturing Company
Indeck Power Equipment Company
SWITCHES
STOKERS, SPREADER
1 Switches - General 50 Vacuum
50 Traveling grate 60 Vibrating grate
CORIMPEX USA, Inc.
Detroit Stoker Company (50,60) See our ad on p. 51
United Electric Controls (1,50)
Indeck Power Equipment Company
Namco (1)
SWITCHES, TRANSFER
Warren & Baerg Manufacturing, Inc. (1)
STOKERS, UNDERFEED
Lake Shore Electric Corp
SOOTBLOWERS
10 Multiple retort 20 Single retort
SWITCHES CONTROL Tapeswitch Corporation
1 Sootblowers - General 10 Acoustic 20 Air 30 Detonation 40 Steam 50 Water
Detroit Stoker Company (10,20) See our ad on p. 51
STORAGE
Belyea Company Inc (1)
Advanced Acoustic Technologies, LLC
1 Storage - General 20 Hazardous materials 30 Units
Gilbert Electrical Systems & Products
Analytec Corp Clyde Bergemann Power Group (1,10,20,40,50) Diamond Power International Inc (1,20,30,40,50)
Indeck Power Equipment Company
SORBENT INJECTION
SWITCHGEAR 1 Switchgear - General
Big Top Manufacturing ClearSpan Fabric Structures
Russelectric Inc
TANKS
STRAINERS
1 Tanks - General 10 Reaction 20 Settling 30 Storage 40 Storage thermal energy
Jamison Products, LP
Allegheny Industrial Sales Inc (30)
Transocean Equipment Management, LLC (1,20,30)
SS Power Systems
Breen Energy Solutions
Columbian TecTank Inc
Clyde Bergemann Power Group
SUBSTATIONS (GENERAL)
CONVAULT INC
Fuel Tech Inc.
1 Substations (general) - General 10 Outdoor 20 Packaged
Fisher Tank Company (1,10,20,40,40)
NatronX Technologies, LLC
114
DIS-TRAN Packaged Substations
Tatman Associates Inc (1,10,20)
SolarDock
SOLAR PV
Beta Engineering
Enerscan Engineering Inc. (10)
Entech Design, Inc Matec In America
Belyea Company Inc (1)
www.powermag.com
Gas Corporation of America
|
POWER December 2013
Paul Mueller Company (1,10,30,40)
TOOLS
Pittsburg Tank & Tower Maintenance Co.
10 Battery powered 20 Hand 50 Portable
JSHP Trasnformer
TELEMETERING SYSTEMS/ EQUIPMENT
Associated Electric Products,Inc
TRANSMISSION MECHANICAL
Atlas Copco Tools and Assembly Systems
Sohre Turbomachinery Inc
C.S. Osborne & Co
10 Gears gear boxes 20 Couplings
Trinity Industries, Inc.
TENSIONERS P&S Vorspannsysteme AG
Daniels Manufacturing Corp Metabo Corporation (10,20,50) The Ripley Company
Superbolt, Inc.
TORQUE CONVERTERS TERMINAL BLOCKS
1 Test equipment - General 20 Circuit breaker 30 Communications 50 Ground resistance 60 High current 70 HV impulse 80 HV test sets 90 Insulation 100 Load banks 110 Oil 130 Reclosers 170 Testing standards American Aerospace Controls, Inc AMREL/AMERICAN RELIANCE Doble Engineering Company Eagle Eye Power Solutions (1,30,50,100,170) Fluke Corporation Haefely Test AG Highland Technology, Inc. Iris Power-Qualitrol Laser Imaging Systems
Newport Electronics, Inc. Nol-Tec Systems, Inc. See our ad on p. 49
TRASH RACKS
DIS-TRAN Steel, LLC
Linita Design & Mfg. Corp.
TRAILERS/PRE-FAB BUILDINGS/SHELTERS
TRUCK DUMPERS
TUBE CLEANERS TRAINING MATERIALS – TEXTBOOKS, WORKBOOKS, MEDIA, ONLINE LEARNING PORTAL 1 Training - General 10 Environmental 20 Equipment 30 Fossil 40 Management and Supervisory 50 Online LMS – Educator supported and Se lf Directed 60 Safety Energy Providers Coalition for Education (EPCE) (1,50) Global Training Solutions Inc (1,10,20,30,40,50,60)
Panglobal Training Systems Ltd. (1,10,20,30,40,50,60) Simutech Multimedia (50,60)
Rotek Instrument Corp (170)
TRANSDUCERS
Teseq
Kistler Instrument Corp
Zensol Automation Inc
Measurement Specialties Inc
Advanced Inspection Technologies Inc. (1,10,20,30)
Airoflex Equipment
ThermaSteel Corp
Technology Transfer Transfer Services (1,20,30,50)
1 Test equipment, nondestructive - General 10 Borescopes 20 Remote visual 30 Videoimagescopes
TRANSMITTERS
TOWERS, TRANSMISSION
Phenix Technologies Inc (1,20,60,70,80,90,110,130)
TEST EQUIPMENT EQUIPMENT,, NONDESTRUCTIVE
Voith Turbo GmbH & Co. KG (10,20)
Magnetrol International, Inc See our ad on p. 5
Martin Engineering See our ad on p. 54
Megger
NORD Drivesystems - Getriebebau NORD GmbH & Co. KG
Voith Turbo GmbH & Co. KG
HOPPY Industrial Co., Ltd.
TEST EQUIPMENT
TRANSFORMERS, TRANSMISSION/SUBSTATION
Conco Systems Inc.
TUBE SHIELDS Indeck Power Equipment Company
TUBES Fine Tubes Ltd. Vallourec Heat Exchanger Tubes, Inc.
TUBES, MA MATERIALS TERIALS 1 Tubes, materials - General 50 Stainless steel 60 Titanium Vallourec Heat Exchanger Tubes, Inc. (1,50,60)
TUBES, REPLACEMENT 1 Tubes, replacement - General 10 Boilers 20 Condensers 30 Heat exchangers Chanute Manufacturing (1,10) Indeck Power Equipment Company Knotts & Co Minnotte Manufacturing Corp. (10)
TRANSFORMER PADS
Plymouth Tube Co
Highline Products
Vallourec Heat Exchanger Tubes, Inc. (1,20,30)
TRANSFORMERS, DISTRIBUTION
TUBING
Belyea Company Inc Jefferson Electric
Phenix Technologies Inc (1)
P R O D U C T D I R E C T O R Y
1 Tubing - General 10 Copper 20 Stainless-steel Boiler Tube Co of America (1,20) Olin Brass - Fineweld Tube (10)
|
December 2013 POWER
www.powermag.com
115
Plymouth Tube Company (1,20) Trent Tube Vallourec Heat Exchanger Tubes, Inc. (1,20)
TURBINE Alstom Thermal Services Capstone Turbine Corporation ConocoPhillips SCHMIDT INDUSTRIES Wabash Power Equipment Company
TURBINE BLADES 1 Turbine blades - General 20 Steam turbine
Y R O T C E R I D T C U D O R P
Hitachi Power Systems America Ltd. Mechanical Dynamics & Analysis, Ltd. (1,20) Stork H&E Turbo Blading Inc
TURBINE COMPONENTS Turbo Parts, LLC Sohre Turbomachinery Inc
VALVE ACTUATORS/ VALVE ACT UATORS/ POSITIONERS 1 Valve actuators/positioners - General 10 Electric, motor 30 Electrohydr E lectrohydraulic aulic 40 Pneumatic, cylinder Alcon Solenoid Valves
Dresser-Rand, COPPUS Portable Ventilators General Equipment Co. Moffitt Corporation
VIBRATION ISOLATORS I SOLATORS
Beck, Harold Beck & Sons Inc (1,10)
Enidine Inc
DREHMO GmbH
Fabreeka International, Inc.
Flowserve (1,10,30,40) Midland-ACS Rotork Controls Inc
VALVES VAL VES 10 Abrasion-resistant 20 Airlocks 40 Control 60 Diaphragm 70 Corrosion-resistant 80 Test equipment 90 Vacuum 180 Nuclear Allen-Sherman-Hoff (10,20,40,60,80,90)
VIBRATORS Martin Engineering See our ad on p. 54
VOLTAGE VOLT AGE REGULATORS R EGULATORS ABB Switzerland Ltd Phenix Technologies Inc
WASHERS 1 Washers - General Solon Manufacturing Company (1) Wheelwash USA
American Industrial Supply
TURBINE/ROTOR/SHELL REPAIR
Asco Valve Inc
SCHMIDT INDUSTRIES
CCI (Control Component Inc)
TURBINES, GAS 1 Turbines, gas - General ap+m Applied Gas Turbines (1)
Bonetti, S.p.A.
Champion Valves, Inc. Clyde Bergemann Power Group Conval, Inc
WASTE-MANAGEMENT GTI
WASTE-TO-ENERGY SYSTEMS ElectraTherm Proe Power Systems, LLC PWR - Plasma Waste Recycling
Copes-Vulcan, An SPX Brand
Emerson Process Management, Fisher
WASTEWATER TREATMENT SYSTEMS
Everlasting Valve Company
Amiad Filtration Systems
Flowrox Oy (former Larox Flowsys Oy) (10,40)
Aquatech International Corporation
Flowserve (20,40,70,)
GEA Process Engineering
GESTRA AG
Mercer International Oil Water Separators
JoshiJampala Engineering Pvt Ltd
Pick Heaters, Inc.
Leslie Controls, Inc. (40)
Sera ProDos GmbH
TURBINES, HYDRAULIC
Mogas Industries (40,90)
Dongfang Electric Corp / DSI
Parker Fluid Control Division
Siemens Industry, Inc. - Water Technologies Technologies Business Unit
TURBINES, STEAM
Pentair Valves & Controls (formerly known as Tyco Valves & Controls)
Ares Technology, LLC Capstone Turbine Corporation Chromalloy (1) E.D.I, Inc Hitachi Power Systems America Ltd. (1) Turbine Energy Solutions, LLC Wabash Power Equipment Company (1)
DFT Inc. (40)
Smith & Loveless Inc. WesTech Engineering
1 Turbines, steam - General 10 Spare
Petro-Valve
Dresser-Rand
SCHMIDT INDUSTRIES
Hitachi Power Systems America Ltd. (1)
1 Water treatment systems - Ge neral 5 Electrodeionization
SIGMA, INC
Mechanical Dynamics & Analysis, Ltd. (1,10)
NAB
SOUTHWELL INDUSTRIES
Wabash Power Equipment Company (1)
eNPure Process Systems, Inc.
SPX Flow Technology
H2O Innovation USA, Inc
Tyco Flow Control
Ionics Incorporated
PSB Industries
VEHIC LES/TRUCKS VEHICLES/T RUCKS/TRUCK /TRUCK BODIES Omaha Standard PALFINGER
116
VENTILATORS VENTI LATORS
www.powermag.com
WATER TREATMENT SYSTEMS
MacroTech, Inc. MPW Industrial Services OVIVO USA LLC (1,5)
|
POWER December 2013
Parkson Corporation (1)
AERIAL LIFTS
CALL PROCESSING
Zinkan Enterprises, Inc.
Utility Equipment Leasing Corp
WRB Communications
WEB-BASED PRODUCTS
AERIAL SURVEY
CERTIFICATION CERTIFICA TION & TESTING
Atlas Business Solutions, Inc. (ABS)
Topographic Topographic Imaging Inc
American Association of Boiler Assessors, Inc.
Inspectech, Corporation
Laboratory Testing Inc.
AIR-PREHEATER AIR-PREHEA TER CLEANING
Viryanet
WELDING EQUIPMENT
Breen Energy Solutions
CLEANING (EQUIPMENT)
Corrosion Monitoring Services
1 Cleaning (equipment) - General
Arc Machines, Inc.
AIMS LLC
Astro Arc Polysoude Inc
ALIGNMENT
ESAB Welding & Cutting Products
1 Alignment - General 10 Shaft 20 Turbine component
MinTech Enterprises
Mechanical Dynamics & Analysis, Ltd. (1,10,20)
Specialized Safety Products, Inc. (1)
Eutectic Corporation Liburdi Dimetrics Corporation Magnatech LLC
React 365 Inc.
COMMUNICATIONS COMMUNICA TIONS SERVICES
Pemamek Oy Ltd Weldstar Company
Cryogenic Institute of New England, Inc.
ASH POND MAINTENANCE
1 Communications services - General
Encore Dredging, Inc.
Crystal Communication Ltd.
WET ELECTROSTATIC PRECIPITATORS
ASSET RECOVERY
Southern Environmental
SRP
WINCHES
ASSOCIATION, PROFESSIONAL AND/OR TRADE
Fluor Enterprises, Inc.
American Wind Energy Association
Gardner Denver
Signal-X-Press Concept
K&G Power Systems
Ukraine Partnership Bureau
MAN Turbo Inc USA
10 Portable Lifting Gear Hire Corporation (10)
WIND TURBINES USED SRC Greenpower pvt ltd
Political Robo Calls. GOTV Robocalls Virtual Phone System (1)
COMPRESSORS CECO Compressor Engineering Corp
Sullair
WINDINGS
BALANCING
10 Generator/motor
Mechanical Dynamics & Analysis, Ltd.
Mechanical Dynamics & Analysis, Ltd. (10)
Schenck Trebel Corporation
National Electric Coil (10)
BOILER OPTIMIZA OPTIMIZATION TION WIRE
Clyde Bergemann Power Group
Anixter
Diamond Power International Inc
Stainless & Nickel Alloys, LLC
Fuel Tech Inc.
COMPUTING SERVICES/ SOFTWARE 1 Computing services/software - General 5 Computer modeling 20 Database services 40 Information management 50 Software design EcoSys
P R O D U C T D I R E C T O R Y
S E R V I C E S D I R E C T O R Y
Engineering Software (1,5,20,40,50)
WIRE SUPER CONDUCTING
BOILERS
KUKA Real-Time Products
SuperPower Inc.
1 Boilers - General
Navigant Consulting Inc.
Babcock Power Services Inc (1)
OpenLink
BORSIG GmbH
Sword CTSpace
Cleaver-Brooks
WebLayers, Inc.
WIRING PRODUCTS BMC P. Ltd.
Expro Services Inc.
SERVICES DIRECTORY
George H. Bodman Inc. Industrial Engineering, S.A. Nationwide Boiler Incorporated Rentech Boiler Systems, Inc (1)
ADVANCED TECHNOLOGY GAS TURBINE REBUILDING Sulzer Turbo Services
CONDENSERS 10 Inspection Curran International Graham Corp
CABLE RESTORATION AND CONDITION ASSESSMENT
Intek, Inc. RetubeCo, Inc. (10)
Novinium UTILX Corp
|
December 2013 POWER
www.powermag.com
117
CONSTRUCTION EQUIPMENT RENTAL/LEASING Bulldog Erectors, Inc. - Crane Division Lifting Gear Hire Corporation
CONSTRUCTION SERVICES
CRANES/DERRICKS
Drennen Engineering, Inc. (37)
Barnhart
Exponential Engineering Company (30,37,60,75,80)
DESIGN SERVICES
Fern Engineering
1 Design services - General
GSE Consulting, LP
Bibb EAC
1 Construction services - General 10 Buildings/shelters 20 Distribution line
HGP Inc.
Sargent & Lundy LLC (1)
Interliance LLC
URS, Power Business Unit (1)
BE&K Construction Company, LLC
JR ASSOCIATES CONSTRUCTION SERVICES INC.
Cambria Contracting, Inc.
Lanier Consulting, LLC
ELECTRIC SERVICES
Casey Industrial, Inc.
LAP Power Engineering
Flight Systems Industrial Products
CB&I See our ad on p. 3
Lockwood Greene
CIANBRO Conomos Industrial Services Construction Business Associates, LLC (1) Industrial Contract Services Inc (10)
M+P Labs, Inc. (50) MBDi (Mastering Business Development, Inc) MECS Inc National Technical Systems
Kiewit Power
PB Power, a divis ion of Parsons Brinckerhoff Quade & Douglas
NAES Power Contractors, Inc. (1,20)
People and Processes, Inc
Quanta Services
R. W. Beck, Inc
S & B E ngineers and Constructors, Ltd. (1)
Sargent & Lundy LLC (10,20,30,35,37,45,50,6 0,70,75,80,90)
SW Funk Industrial Contractors, Inc. (1,10) TEi Construction Services, Inc. (1) The Solid Waste Authority of Palm Beach County
Y R O T C E R I D S E C I V R E S
Data Systems & Solutions LLC
Securicon, LLC SUN Technical Services The Stellar Group
URS, Power Business Unit (1)
The Utility FPE Group, Inc. (Plant Risk Engineering)
CONSULTANT
URS, Power Business Unit
GSI - Generator Services Int, Inc Hurst Technologies Corp. SMS Energy-Engineering Inc.
CONSULTING 1 Consulting - General 10 Computer/software 20 Consulting services information systems 30 Energy management 35 Independent system operators 37 Inspection 45 Market structures 50 Materials 55 Organization/Industrial Development 60 Power generation systems 70 Soil mechanics 75 Substation automation 80 System engineering 90 T&D economics 100 Telecommunications Telecommunications 125 Psychological
CONSULTING/SERVICES, ENVIRONMENTAL
ENERGY EFFICIENCY SERVICES 1 Energy efficiency services - General 10 Energy audits 40 Equipment sale and or lease earth energy Solutions GROUP (40) Energy Concepts Company (1,10,40)
ENERGY SERVICES 1 Energy services - General 10 Consulting 20 Plant or system operations 30 Plant or system maintenance & other 40 Products & Installation
Eren Energy Power Plant (1)
Albemarle Environmental Division (1)
FMC Technologies, Inc.
Alchemy Consultants, Inc.
GP Strategies Corporation, Energy Services Group (1,10,20,40)
Benetech Ellison Consultants
Aptech Engineering Services Inc Dubai Electricity and Water Authority
PIC Group, Inc. (1,10,20,30,40) See our ad on p. 19
ENV Environmental S.M. Stoller Corp. (1) Sargent & Lundy LLC (1,10,30)
ENERGY SYSTEM MANAGEMENT
URS, Power Business Unit (1)
Calpine Corp
Weston Solutions Inc
Performance Performance Consulting Services PFBC Environmental Energy Technology Inc
Cooling Tower Consulting, LLC
ENGINEERING SERVICES
Cooling Tower Technologies, Inc.
Ampirical Solutions, LLC
SPX Cooling Technoogies Technoogies
BARTEC GmbH
Universal Utility Services, LLC
Bechtel
BHI Energy See our ad on p. 1
Construction Business Associates, LLC 118
Nol-Tec Systems, Inc. See our ad on p. 49
Airflow Sciences Corporation
COOLING TOWERS
Commodities Consulting & Asset Management COMCAM
Clyde Bergemann Power Group
3Degrees
Asia Carbon Energy (30,45,50,55,60,80,90,125)
Cogen Power Inc
Beltran Technologies, Inc.
1 Consulting/services, environmental - General 10 Emissions control 30 Continuous emissions monitoring
Allegro
Belgrave Management Ltd
ELECTROSTATIC PRECIPITATORS
www.powermag.com
|
POWER December 2013
Bilfinger Berger Power Services GmbH Design Analysis Services Energy Associates, P.C. Intertek AIM Kiewit Power Knight Piésold Consulting Mead & Hunt, Inc. Mechanical Dynamics & Analysis, Ltd. POWER Engineers, Inc. Pure Technologies Ltd. Richmond Engineering Works Sega Inc. Structural Integrity Associates, Inc. See our ad on p. 13
Processes Unlimited International Inc. (1,70,80)
FLOW MEASUREMENT/ CALIBRATION CALIBRA TION SERV ICES
Prochaska & Associates Quietly Making Noise
1 Flow measurement/calibration services General
River Consulting, LLC (1)
Sentry Equipment Corp (1)
Sargent & Lundy LLC (1,10,20,30,40,50,60,70,80)
FLOW MODELING
Sega Inc
Braden Mfg LLC
Southern Research Stanley Consultants, Inc. (1) STEAG Energy Services LLC (1,20,30) STYL&TECH
Tech Center Thaker Simulation Technologies Thielsch Engineering
FUEL SUPPLY SERVICES
Utility Consultants Inc
Weidmann Systems International
1 Fuel supply services - General 10 Brokering 20 Fuel cost minimization 30 Procurement, delivery or management
Zachry Engineering Corporation (1,20,70)
Advanced Remediation LLC (1,10,20,30)
Turnell Corp.
ENVIRONMENTAL CONSULTING
Xdot Engineering and Analysis, pLLc
Sargent & Lundy LLC
ENGINEERING STUDIES Alden
EXECUTIVE SEARCH CONSULTANTS
Nuclear Systems Associates, Inc.
Barry Persky & Company, Inc.
ENGINEERING, DESIGN SERVICES 1 Engineering, design services - General 10 Distribution systems 20 Environmental 30 Field Service 40 Noise abatement 50 Protective systems 60 Stacks 70 Substations 80 Transmission line Abengoa Aquatic Sciences L. P. Benetech (1,20,30) Beu-Math Engineering, Inc. BICE Engineering and Consulting CCC Group Inc., Air Control Science Division CCC Group, Inc. Engineering & Design Divi sion CE Power Solutions CH2M HILL Concepts NREC (20) CRC Engineering, P.C. Doosan Engineering & Services, LLC ( A Burns & Roe - Doosan Projects Alliance) ESI Inc of Tennessee GAI Consultants, Inc. KnightHawk Engineering
Fuel Tech Inc.
URS, Power Business Unit (1)
Valdes Engineering Company
Synergy
FLUE-GAS CONDITIONING SYSTEM SERVICES
Bannerstone Energy
FUEL-HANDLING SERVICES Benetech
FULL-INSTALLATION FULL-INSTALLA TION SERVICES URS, Power Business Unit
Sanford Rose Opportunity Center
GALVANIZING
FANS
American Galvanizers Association Imbibitive Technologies America, Inc.
Boldrocchi Srl
FEEDWATER HEATER & CONDENSER SERVICES TEi Services
GAS SERVICES Phillips 66, E-Gas Technology for Gasification
GENERATORS, GENERA TORS, STEAM
FEEDWATER HEATERS (CLOSED) 1 Feedwater heaters (closed) - General 10 Rebuilding 40 Removal/Installation 50 Repair 60 Retubing/Rebundle 70 Tube plugging 80 Tube sleeving 90 Welding Hydro Dyne Inc. (1,10,40,50,60,70,80,90)
1 Generators, steam - General 10 Fluidized bed 20 Rebuilding 30 Upgrading Foster Wheeler Ltd, Foster Wheeler North America Corp Nooter/Eriksen, Inc Premier Energy Services Inc Rentech Boiler Systems, Inc (1,10,20,30)
GENERATORS/MOTORS
FILTERS, FABRIC
AGT Services Inc
1 Filters, fabric - General
Equipment Maintenance Services, Inc.
K-Flow Engineering Co., Ltd. (1)
KEPCO/KPS
Southern Environmental
HEAT EXCHANGERS
FINANCIAL SERVICES
Colmac Coil Manufacturing, Inc.
Altec Capital Services, LLC
Condenser & Chiller Services, Inc.
Interdevelopment, Inc.
Hydropro Hydropro Incorporated
M+W Group
S E R V I C E S D I R E C T O R Y
Krueger Engr & Mfg Co, Inc
MAVEN POWER, LLC
|
December 2013 POWER
www.powermag.com
119
O’Donnell Consulting Engineers, Inc.
LAGAL SERVICES
MODELING
Tranter
Polsinelli Shughart, PC
Fuel Tech Inc.
HELICOPTERS, HELICOPTER SERVICES
LONG TERM SERVICE AGREEMENTS
MULTI-POLLUTANT CONTROL
Erickson Air-Crane Inc
Clyde Bergemann Power Group
Breen Energy Solutions
INFORMATION INFORMA TION SERVICES
LUBE OIL
Platts UDI
Analysts, Inc.
INSPECTION SERVICES
MAINTENANCE SERVICES/ PRODUCTS
1 Inspection services - General 20 Eddy current testing 40 Infrared Express Integrated Technologies LLC GE Inspection Technologies
Y R O T C E R I D S E C I V R E S
Nol-Tec Systems, Inc. See our ad on p. 49 Siemens Energy Inc. - Environmental Systems & Services
NUCLEAR FUEL SERVICES
ASB Industries, Inc.
Westinghouse Electric Company
Benetech
BHI Energy See our ad on p. 1
Jamko Technical Solutions, Inc.
CGV Engineering Services Ltd
Laboratory Testing Inc. (1)
ClearView Monitoring Solutions
Look Technologies, llc (1)
Construction Techniques, Inc
MHT Access Services, Inc.
Day & Zimmermann ECM
National Chimney and Stack (1)
EHC Field Services, Inc.
National Electric Coil
Field Works Inc
National Inspection & Consultants, Inc. (1)
Iris Power LP
Pure Technologies Ltd.
Kafko Intl. Ltd.
ThirdPartyInspections.com
Lanj Tools LLC
U.S. Underwater Services, LLC
Mechanical Dynamics & Analysis, Ltd.
UNITED DYNAMICS CORPORATION (1,20,40)
National Electric Coil
URS, Power Business Unit (1)
R&G Laboratories, Inc.
1 Instrumentation/control system services Gene 10 Calibration 20 Component replacement 30 Diagnostics 40 Installation
Fuel Tech Inc.
A.J. Weller Corporation
GKS Inspection Services & Laser Design
INSTRUMENTATION/CONTROL SYSTEM SERVICES
Babcock Power Environmental Inc
TurboCare Inc
MAPS/MAPPING SERVICES Geospatial Corporation Lasermap Image Plus/GPR
NUCLEAR POWERPLANT 1 Nuclear power plant - General 10 Component replacement
BHI Energy (1,10) See our ad on p. 1 HydraTight / D.L. Ricci Neptune Underwater Services(USA)LLC. Sargent & Lundy LLC (1) TRC - Nuclear Generation Services (1) URS, Power Business Unit (1,10)
OPERATIONS AND MAINTENANCE SERVICES BHI Energy See our ad on p. 1 Delta Power Services
NAES Corporation See our ad on p. 44 OMSCO Primesouth Inc. PRO Solutions, Inc
MARKETERS
Sargent & Lundy LLC
AquatiPro™
Allied Union Inc.
Sterling Energy International
Coritech Services
ILT-RES, LLC
URS, Power Business Unit
HC Controls Inc.
PGH Marketing
Phenix Technologies Inc (10)
TURNER BUSINESS SERVICES LLC
Process Automation and Control, Inc. Scheck Industries (1,10,20,30,40) SOR Inc. Zolo Technologies, Inc.
INVASIVE MUSSEL CONTROL Zequanox (by Marrone Bio In novations)
PERSONNEL SUPPORT SERVICES
10 Materials flow modeling 20 Materials quality tracking
1 Personnel support services - General 10 Consultants 20 Craft labor 25 Recruitment/employment 30 Technical/professional Technical/professional
Benetech (10,20)
Aerotek Energy Services
Martin Engineering See our ad on p. 54
BHI Energy (1,10,20,25,30) (1,10,20,25,30) See our ad on p. 1
MATERIALS HANDLING MANAGEMENT
Lineal Recruiting Services
INVENTORY SERVICES
MERCURY CONTROL
The David Wood Co
Dynamic Systems, Inc.
Fuel Tech Inc.
UnseenHeroes
Nalco Air Protection Technologies
120
www.powermag.com
|
POWER December 2013
PIPE
Magellan Professional Solutions, Inc.
RoMaDyn
Beetle Plastics, LLC
MOPAC Plant & Building Service
The Avogadro Group, LLC
CBP Engineering Corp
Precision Blasting Inc
EdgenMurray
ProEnergy Services See our ad on Cover 4
THERMOGRAPHIC EQUIPMENT/SERVICES
URS, Power Business Unit
Xenics
SIMULATORS SIMULA TORS TRAINING
TRAINING
GSE Systems, Inc
1 Training - General 10 Automation 20 Environmental 40 Maintenance 50 Management and Supervisory 60 Nuclear 80 Safety
Georg Fischer Price Brothers Company
PIPELINE REHABILITATION HydraTech Engineered Products
POWER QUALITY SERVICES 1 Power quality services - General 10 Assessment and/or monitoring 20 Management 30 Upgrades and/or improvements
SITING SERVICES 20 Environmental studies Sargent & Lundy LLC (20)
SPARE PARTS
360training.com and LKItraining.com Automation Training Inc. (1,10,40,50,80)
Allied Industrial Marketing, Inc. (1)
Beumer Kansas City LLC
Sargent & Lundy LLC (1,10,20,30)
BRUKS Rockwood
URS, Power Business Unit (1,30)
Clyde Bergemann Power Group
EITI - Electrical I ndustry Training Institute USA Inc.
Mechanical Dynamics & Analysis, Ltd.
Hitachi Power Systems America Ltd. (1,60)
POWER/BROKERS/ MARKETERS/SUPPLIERS Advanta Energy Corp. eMpasys
IFS North America, Inc
STACKS 1 Stacks - General Hoffmann, Inc (1)
PROJECT DEVELOPMENT SERVICES ILT-RES, ILT-RES, LLC Benetech Canasia Power Corp. CarrierClass Green I nfrastructure
AVO Training Institute, Inc.
STEAM TURBINE AND COMPRESSOR OVERHAUL Dresser-Rand Company Ltd Mechanical Dynamics & Analysis, Ltd. SCHMIDT INDUSTRIES
Industrial Insite, LLC Martech Media, Inc Martin Engineering See our ad on p. 54 Mechanical Dynamics & Analysis, Ltd. (40) Pulse Corp Sargent & Lundy LLC Sologic, LLC (20,40,60) The Graphic Works
Engineers India Limited
STOKERS
Thermal Engineering Associates
F.E. Moran Special Hazard Systems
Detroit Stoker Company See our ad on p. 51
TRANSFORMERS
Sargent & Lundy LLC
PUMPS Miller Engineering-ANM Equipment
RENEWABLE ENERGY The Tata Power Company Limited
SAFETY PROGRAMS Belt Conveyor Guarding COSS Martin Engineering See our ad on p. 54 Summit Training Source
SERVICES, MISCELLANEOUS
TELECOMMUNICATIONS SERVICES Automated Appointment Reminders
ABB Transformer Remanufacturing and Engineering Services
Verizon
Belyea Company Inc (20) FLEX-CORE
TESTING
Hitachi Power Systems America Ltd.
1 Testing - General 10 Motors (electric) 20 Oil 30 Switchgear 40 Vibration analysis
Instrument Transformer Transformer Equipment Corp (I TEC)
American Electrical Testing Co., Inc. Breen Energy Solutions
TRANSPORT/PROCESSING, COAL-ASH
ComRent International, LLC
Headwaters Inc
Gearhart Mckee Inc.
American Efficiency Services, LLC
Laboratory Testing Inc. (1)
Bianchi Industrial Services, LLC
Mechanical Dynamics & Analysis, Ltd. (1,40)
Bierlein Companies
Microbeam Technologies Inc. (1)
Brandenburg Industrial Industrial Service Co.
Phenix Technologies Inc (10,20,30)
Enertech, a business unit of Curtiss-Wright Flow Control Company
POLARIS Laboratories
|
December 2013 POWER
20 Rebuilt, sales/lease 50 Testing
S E R V I C E S D I R E C T O R Y
www.powermag.com
Phenix Technologies Inc (50) Technical Services Group Inc
TRANSPORTATION C.H.ROBINSON WORLDWIDE ATM Air Freight
121
Toshiba International Corporation (1,10,40,70,80,90,100,110)
TURBINES, GAS 1 Turbines, gas - General 10 Blade repairing 30 Engineering 50 Overhauling 60 Rebuilding 70 Servicing
Kitmondo Ltd
Active3D Inc.
McGills Equipment
Advanced Combustion Technology Inc
Trans-Global Distributions
Turbine Generator Maintenance, Inc
USED EQUIPMENT SALES
Allied Power Group (1) Independent Turbine Consulting, LLC Mechanical Dynamics & Analysis, Ltd. (1,30,50,60,70) Mitsubishi Power Systems Inc
NAES Corporation (10,50,60,70) See our ad on p. 44 Power Systems Mfg LLC Wood Group GTS WorleyParsons WorleyParsons Group, Inc.
TURBINES, STEAM 1 Turbines, steam - General 10 Blade repairing 20 Coupling bolts 30 Generator-drive 40 Induction bolt heating 50 Mechanical-drive, multistage 60 Mechanical-drive, single-stage 70 Oil flush Y R 80 Overhauling O 90 Rebuilding T 100 Rotor aligning C 110 Servicing E
R I D S E C I V R E S
Swagelok Company Ultraflo Corporation, A subsidiary of BRAY International, Inc Valvesearch.com Velan Valve Corp
VALVES VAL VES
Gas Turbine Maintenance LLC
Rodney Hunt-Fontaine (40)
WATER AND/OR WASTEWATER WATER SERVICES 1 Water and/or wastewater services - General
1 Valves - General 10 Abrasion-resistant Abrasion-resistant 20 Angle 30 Ball 40 Butterfly 45 Control 50 Check 70 Corrosion-resistant Corrosion-resistant 120 Gate 130 Globe 140 Installation 160 Modifying 180 Nuclear 220 Reconditioning 230 Repairing AZZ | N L I (180)
C.M.G. AND ASSOCIATES INC ASI Group Ltd. J7 Learning & Consulting (1) Reynolds, Inc Sentry Equipment Corp (1)
WELDING BHI Energy See our ad on p. 1 Welding Technologies
WIND FARM DESIGN & MAPPING
BHI Energy See our ad on p. 1
METEODYN AMERICA
Bonetti Valves and Gauges
Sargent & Lundy LLC
BRAY BRAY Controls, Division of Bray International, Inc. Cesare Bonetti Inc. CFM/VR-TESCO, LLC-Continental Field Machining
WIND FARM OPERATION & MAINTENANCE Mechanical Dynamics & Analysis, Ltd.
CPV Manufacturing
Belyea Company Inc (1)
BHI Energy (1,40,70,80,90,100,110) (1,40,70,80,90,100,110) See our ad on p. 1 Electroputere S.A., DIEC
Dexter Innovative Solutions LLC (230) Flowserve (1,20,30,40,45,50,70, 120,130,160,180,220,230)
Global Industrial Solutions
Flow-Tek Inc, A subsidiary of BRAY BRAY International Inc
Hitachi Power Systems America Ltd. (1)
Industrial Servo Hydraulics, Inc.
Kingsbury Repair & Service
JASC: Jansens Aircraft Systems Controls Inc
Mechanical Dynamics & Analysis, Ltd. (1,10,20,30,50,60,80,90,100,110)
Mechanical Dynamics & Analysis, Ltd. (1,10,140,160,220,230)
Power Equipment Maintenance
PGI International
Power Generation Service, Inc
Ritepro Inc, A subsidiary of BRAY International, Inc
Toshiba International Corp, Power Systems Div
WANT TO BE INCLUDED IN THE 2014
BUYERS’ GUIDE? Please visit www.powermag.com/powerconnect www.powermag.com/powerconnect to add your information
122
www.powermag.com
|
POWER December 2013
Have you checked out the new POWER bookstore and products? JUST RELEASED!
Advanced Engineering Mathematics 5th Edition Revised, expanded, and extremely comprehensive, this best-selling reference is like having your own personal tutor. You proceed at your own rate and an d any diffi culties you may encounter encount er are resolved reso lved before you move on to the the next topic. With a step-by-step step-by-step programmed programmed approach that is complemented by hundreds of worked examples and exercises, Advanced Engineering Mathematics Mathematics is ideal as an on-the job reference for professionals.
Engineering Mathematics 7th Edition A groundbreaking groundbreaking and comprehensive comprehensive reference with over 500,000 copies sold since s ince it first debuted debute d in 1970, the new n ew seventh edition of Engineering Mathematics has been thoroughly revised and expanded. An interactive Personal Personal Tutor Tutor CD-ROM is is included with every book. Providing a broad mathematical survey, this innovative volume covers a full range of topics from the very basic to the advanced. Whether you’re an engineer looking for a useful useful on-the-job reference or want to improve your mathematical skills, Engineering Mathematics is sure to come in handy time and time again.
Find these and other useful tools online at
http://store.powermag.com/ or call 888-707-5808.
POWER PROFESSIONALS Opportunities in Operations and Maintenance, Project Engineering and Project Management, Business and Project Development, First-line Supervision to Executive Level Positions. Employer pays fee. Send resumes to: P.O. Box 87875 Vancouver, WA 98687-7875 email:
[email protected] [email protected] om (360) 260-0979 l (360) 253-5292 www.powerindustrycareers.com
‚ Don t follow the leader. Don Join Jo in thei theirr te team am.. If you’re in sales and want to work for a leading supplier of control and electrical solutions, contact Siemens today!
CAREERS IN POWER NAES Corporation is a leading provider of 3rd party O&M services to the Independent Power Industry. As we continue to grow, we have constant needs for power professionals across the nation. For more info, log onto: www.naes.com/careers
Siemens is a leading supplier of control and electrical solutions to the power industry. We are currently looking for outside sales professionals with the drive and talent to apply their skills in positioning a broad line of high-quality products and services.
We offer a totally integrated, complete solutions portfolio that will meet your customers’ business drivers. And we offer a competitive compensation and benefits package that will meet your needs. Join the Siemens team. We’re making a difference through empowered people.
usa.siemens.com/searchjobs
FOR SALE/RENT
24 / 7 EMERGENCY SERVICE BOILERS 20,000 - 400,000 #/Hr.
DIESEL & TURBINE GENERATORS 50 - 25,000 KW
GEARS & TURBINES 25 - 4000 HP
WE STOCK LARGE INVENTORIES OF:
Air Pre-Heaters • Economizers • Deaerators Pumps • Motors • Fuel Oil Heating & Pump Sets Valves • Tubes • Controls • Compressors Pulverizers • Rental Boilers & Generators 847-541-5600
FAX: 847-541-1279
WEB SITE: www.wabashpower.c ww w.wabashpower.com om
wabash
POWER EQUIPMENT CO.
444 Carpenter Avenue, Wheeling, IL 60090 READER SERVICE NUMBER 200
ENEL MACHINERIES AND SPARE PARTS FOR SALE
Until February 15 th 2014 it is possible to qualify for the Enel machineries and spare parts sale process. Main equipments on sale are Turbogas, Trafos, Generators, spare parts and components of different types. For more information visit the website http://globalprocurement.enel.com/en-GB/
CONDENSER & HEAT EXCHANGER TOOLS CLEANERS, PLUGS, BRUSHES John R Robinson Inc. PH # 800-726-1026 e-mail:
[email protected] www.johnrrobinsoninc.com READER SERVICE NUMBER 202
Reference:
Enel Servizi S.r.l. – Italy Procurement – Generation Procurement – Via Arno, 42 – 00198 Roma; e-mail:
[email protected] READER SERVICE NUMBER 203
124
www.powermag.com
|
POWER December 2013
POWER PLANT BUYERS’ MART
PRODUCT
Showcase
Disconnect switch rated plugs & receptacles are ideal for cord drop applications applications – technicians can easily deenergize equipment without having to wear cumbersome PPE and without having to climb a ladder to disconnect power.
OFF Button Provides push button circuit disconnection
READER SERVICE NUMBER 204
Alpha-Omega Training and Compliance, Inc. Nuclear. Steam. Gas. Coal. Worldwide. Your Safety Professional Resource (se habla espanol) www.a-otc.com 321-445-9845 Todd McDowell –
[email protected] READER SERVICE NUMBER 205
Safety Shutter Keeps NFPA 70E risk category = Ø
READER SERVICE NUMBER 208
NEED CABLE? FROM STOCK Copper Power to 69KV; Bare ACSR & AAC Conductor Underground UD-P & URD, Substation Control – Shielded and Non-shielded, Interlock Armor to 35KV, Thermocouple BASIC WIRE & CABLE Fax (773) 539-3500 Ph. (800) 227-4292 E-Mail:
[email protected] WEB SITE: www.basicwire.com
F RE E E S A AM P M P L LE S E S A V V A AI L I LA B A BL E L E
800.433.7642 meltric.com
READER SERVICE NUMBER 209
READER SERVICE NUMBER 211
GAS TURBINES FOR SALE • LM6000 • FRAME 9E • FRAME 5 50/60Hz, nat gas or liq fuel, installation and service available Available for Immediate Shipment
Tel: +1 281.227.568 281.227.5687 7 Fax: +1 281.227.569 281.227.5698 8
[email protected]
READER SERVICE NUMBER 206
OWNERS/MANAGERS
NEED SUPPORT?
Operations Mgmt Troubleshooting Performance
Due Diligence Outage Support Owner’s Rep
www.xsubs.com/services +1-815-642-8680 READER SERVICE NUMBER 207 READER SERVICE NUMBER 210
December2013
| POWER
www.powermag.com
125
POWER PLANT BUYERS’ MART
READER SERVICE NUMBER 212
READER SERVICE NUMBER 215
Media Blasting Services
CONDENSER OR GENERATOR AIR COOLER TUBE PLUGS THE CONKLIN SHERMAN COMPANY, INC.
Easy to install, saves time and money.
From Dry Ice to Walnut Shells,
ADJUSTABLE PLUGS-all rubber with brass insert. Expand Expand it, install it, reverse action for tight fit. PUSH PULL PLUGS- are all rubber, simply push it in. Sizes 0.530 O.D. to 2.035 O.D.
To Advertise in
Tel: (203) 881-0190 • Fax:(203)881-0178 Fax:(203)881-0178 E-mail:
[email protected] • www.conklin-sherman.com
POWER
OVER ONE MILLION PLUGS SOLD
Classifieds
READER SERVICE NUMBER 216
CONTACT
Turbine Controls
www.molemaster.com
Woodward, GE, MHC Parts and Service
Diane Burleson
TurboGen • (610) 631-3480
PHONE
[email protected]
512-337-7890
READER SERVICE NUMBER 213 READER SERVICE NUMBER 217
FAX GEORGE H. BODMAN, INC. Chemical cleaning advisory services for boilers and balance of plant systems
George H. Bodman Pres. / Technical Advisor
BoilerCleaningDoctor.com Office 1-800-286-6069
Layup Desiccant Dehumidification & Filtration Units for long term layup of power generation equipment. Call us.
Tom Haarala 612-202-0765
[email protected] Todd Bradley 810-229-7900
[email protected] www.cdims.com
512-213-4855
[email protected]
Office (281) 359-4006 PO Box 5758 E-mail:
[email protected] Kingwood, TX 77325-5758 Fax (281) 359-4225 READER SERVICE NUMBER 214
126
READER SERVICE NUMBER 218
www.powermag.com
|
POWER December 2013
ADVERTISERS’ INDEX Enter reader service numbers on the FREE Product Information Source card in this issue.
Page
Reader Service Number
Reader Service Page Number
Babcock & Wilcox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 . . . . . . . . 5
MTU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 15
www.babcock.com
Baldor Electric. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 21 . . . . . . . . 15 15
NAES NAES Corp Corp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44. . . . . . . .21
www.baldor.com
BHI Energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . . . . . . 2
CB&I
www.teaminc.com
TerraSource Global . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 2 7 . . . . . . . . 17 17
www.magnetrol.com
Martin Engineering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 5 4 . . . . . . . . 26 26
www.structint.com
TEAM In Industrial Se Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 1 7 . . . . . . . . 12 12
www.fseenergy.com
Magnetrol. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 . . . . . . . . 4
www.stf.it
Structural Integrity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 13 . . . . . . . . 9
www.fibrwrap.com
FSE Energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 12 . . . . . . . . 8
www.rittal-corp.com
STF S.p.A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 20 . . . . . . . . 14 14
www.elginsweeper.com
Fibrwrap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 48 . . . . . . . . 22 22
www.proenergyservices.com/experience
Rittal Corp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-41 . . . . . . 20 20
www.distrigas.com
Elgin Sweeper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 29 . . . . . . . . 18 18
www.piburners.com
ProEnergy Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cover 4 . . . . . 27 27
www.detroitstoker.com
Distrigas GDF Suez . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 11 . . . . . . . . 7
www.picworld.com
Power & In I ndustrial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 14 . . . . . . . . 10 10
www.cutsforth.com
Detroit Stoker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 51 . . . . . . . . 24 24
www.parkline.com
PIC Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 19 . . . . . . . . 13 13
www.cormetech.com
Cutsforth Products ...........................................53........25
www.paharpur.com
Parkline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 38 . . . . . . . . 19 19
www.cbi.com
Cormetech . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 . . . . . . . . 6
www.nol-tec.com
Paharpur . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 23 . . . . . . . . 16 16
www.burnsmcd.com
........... ............. ............ ............ ..... 3 ........ 3
www.naes.com
Nol-Tec Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 49 . . . . . . . . 23 23
www.bhienergy.com
Burns & McDonnell McDonnell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cover Cover 2 . . . . . 1
www.mtu-online.com
www.terrasource.com
www.martin-eng.com
POWER
Subscribe today:
[email protected] December2013 | POWER
www.powermag.com
127
COMMENTARY
Defining the Future: Time to Get Real Christoph Frei he global energy environment is increasing in complexity and uncertainty. We are in a much more challenging world than previously envisaged. The World Energy Council’s (WEC) analysis has exposed a number of myths that have influenced our understanding understanding of the global energy landscape:
T ■
■
■
■
■
■
■
Myth 1: Global energy demand will flatten out. Reality: Energy demand will continue to increase and double by 2050. Myth 2: Peak oil. Reality: There is no shortage in sight for fossil fuel resources. resources. Myth 3: Demand growth will be fully met by new clean energy sources. Reality: According to our scenarios, scenarios, the contribution of fossil fuels to global energy demand is still growing in absolute terms. Myth 4: We can reduce global greenhouse gas (GHG) emissions by 50% by 2050. Reality: Even in the best case we will see a near doubling of GHG emissions compared to 1990 levels. Myth 5: Current business models and markets are delivering. designs are unable to cope with the increasing Reality: Current designs renewable shares, decentralized systems, systems, or growing information architecture. Myth 6: Current programs will deliver universal access to energy within the next 10 to 15 years. Reality: WEC’s analysis shows that on current paths, between 320 million and 530 million people will still be without electricity in 2050. Myth 7: On a global scale capital is cheap and abundant. Reality: Capital is extremely sensitive to perceived political and regulatory risks. Moreover, due to the growing pressures on public finances in most countries, public funds will not be available to augment private energy financing.
Our studies reveal that current pathways fall short of delivering on the global aspirations of energy access, energy security, and environmental sustainability—the three pillars for balancing the “energy trilemma.” Busting these myths helps set us on the right path toward agreeing on the actions for the future we need.
Defining the Future Energy leaders in both the public and private sectors need to make inspired decisions. Action is needed now. Energy leaders agree on many of the actions necessary, but significantly, they are not aligned on the nature, value, and importance of political and institutional risks and their critical impact on investment. Here’s a brief look at the mismatch and how we can secure the future we need. We are looking in the wrong place. The focus of current thinking about the energy system is biased and inadequate. inadequate. The focus must shift from the supply mix to demand efficiency. We need more demand-side investments, innovation, incentives, and stronger technical standards to reduce energy intensity. Price controls, subsidies, subsidies, trade barriers, and absolute targets for indi128
vidual technologies technologies distort the market and can have unintended consequences, so policymakers must only use them sparingly.
In order to attract the needed investment, national policy and regulatory frameworks have to be balanced. The “energy trilemma” provides a solid framework for every country to assess its own political risk and work towards balanced, predictable, and stable policy and institutional frameworks. There is little agreement between investors and governments on the nature, nature, price, and value of risks. Without an understanding understanding about risks, investment will not flow.
We need significant investments in research, development, and demonstration. We urgently need to realize the potential of breakthrough technologies such as electricity storage and carbon capture, use, and storage (CCUS). WEC analysis shows that the 450 parts per million CO2 goal cannot be achieved without CCUS. It is essential that there are clear and unambiguous policy and institutional frameworks to support investment in this technology.
The energy map is changing, and our institutions need to change to keep pace with developments. The center of gravity in energy has moved outside Organisation for Economic Co-operation and Development countries—and so have interactions between countries and regions. Existing multilateral and plurilateral energy institutions need to reflect these changes, be more inclusive and responsive, or risk becoming obsolete.
To ensure universal access to energy, we need to derisk and support entrepreneurial approaches. The WEC recognizes the need for urgent additional action and supports the objectives of the UN Secretary General’s Sustainable Energy for All initiative. The WEC further supports the inclusion of universal energy access as a key and distinct element in the post-2015 Millennium Development Goals. However, However, we caution that without supporting mechanisms and suitable funding, this goal will be extremely difficult to achieve. It’s no longer just about mitigation. Risks from the energy/ water nexus, extreme extreme weather events, or cyber attacks (to name but a few) expose our energy infrastructure to potential disasters. We need to urgently adapt, rethink, and redefine the resilience for energy infrastructure.
Action Is Needed Now How we can tackle these issues to secure tomorrow’s energy today was on top of the discussion agenda in October at the World Energy Congress, the World Energy Council’s flagship triennial event. There, energy leaders—ministers, company chief executives, and key decision-makers—were in agreement that if we are to derive the full economic and social benefits from energy resources, resources, we must take incisive and urgent action to modify our approach to energy solutions. It’s time to get real in defining our future. — Christoph Christoph Frei , secretary general, World Energy Council, www. worldenergy.org, worldenergy.org, @WECouncil
www.powermag.com
■
|
POWER December 2013
new connections connections
new ideas
new opportunities
new orleans
APRIL 1-3, 2014 |
ERNEST N. MORIAL CONVENTION CENTER
Register by December 20 with code PEB14 to save $300! www.electricpowerexpo.com
ENERGIZE
YO U R P O W E R P L A N T
Introducing ProEnergy’s Integrated Power Solutions Boost your plant’s efficiency, improve lifecycle costs, decrease plant downtime, and maximize your power assets. Contact ProEnergy today and learn how we’re energizing the power industry.
Fast Track Power Solutions
Energy Services
Energy Parts Solutions
Download the free Layar app and watch this ad come to life
US Corporate Office | 660.829.5100 | proenergyservices.com CIRCLE 27 ON READER SERVICE CARD
