This is the most complex part of LTE baseband chain which has been documented and made understandable to any reader interested in knowing about the functionality of the LTE UE Cell SearchDescription complète
PRACH Planning LTEDescription complète
Atoll LTE TrainingDeskripsi lengkap
Lte Radio Planning ConceptDescrição completa
LTE Back Haul Planning
Radio Planning of LTE NetworkDescription complète
LTE PCI PlanningDescription complète
A brief description
Full description
FOR YOU BRO
LTE Radio Design for Communication Engineers
1.PCI concept 2.PSS and SSS Location 3.Rreference signals constrains 4.PCI planning principle 5.PCI planning example
Upon completion of this course, you will be able to:
Describe the procedure of PCI planning
Plan the PCI in the live network
PCI: Physical Cell ID, is used to generate scrambling code to identify different cells.
PCI determines Reference Signal position in frequency domain.
It is advised to distribute PCIs in adjacent cells such that Reference Signals does not occupy same subcarrier position.
Therefore cell can have up to 5 different neighbors without interfering in frequency domain, i.e., Modulo6 problem.
Physical Cell ID = 0 R R
eNB
R R
R
RS position is based on Physical Cell ID (Physical Cell ID mod 6)
Physical Cell ID = 8 R R
R R
R
R R
R
R
R
R
eNB
However LTE is usually implemented in 2x2, where the other antenna reference signals are positioned in between first antenna, therefore Modulo6, becomes Modulo3 problem.